HTSW-114-10-L-S-RE Equivalent & Substitute Parts

Part Overview

The HTSW-114-10-L-S-RE is a rectangular connector header manufactured by Samtec Inc., designed for through-hole, right-angle mounting applications. This 14-position connector operates at 0.100" (2.54mm) pitch and features solder termination with push-pull fastening. The part is currently active in production with 929 units in stock. Equivalent and substitute parts are identified to support design flexibility, inventory management, and supply chain continuity for applications requiring compatible 14-position 0.100" pitch header connectors.

Substiute Parts

HTSW-114-10-L-S-RE

Samtec Inc.In Stock: 943HTSW-114-10-L-S-RE Datasheet

Current PartRFQ

HTSW-114-09-L-S-RA

Samtec Inc.In Stock: 907HTSW-114-09-L-S-RA Datasheet

SimilarRFQ

TSW-114-09-L-S-RA

Samtec Inc.In Stock: 1048TSW-114-09-L-S-RA Datasheet

SimilarRFQ

TSW-114-09-L-S-RE

Samtec Inc.In Stock: 1031TSW-114-09-L-S-RE Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the HTSW-114-10-L-S-RE is determined by the following critical parameters:

• Number of Positions: 14
• Pitch - Mating: 0.100" (2.54mm)
• Connector Type: Header
• Contact Type: Male Pin
• Mounting Type: Through Hole, Right Angle
• Termination: Solder
• Fastening Type: Push-Pull
• Contact Finish - Mating: Gold
• Contact Material: Phosphor Bronze
• Operating Temperature: -55°C ~ 125°C
• Material Flammability Rating: UL94 V-0
• RoHS Status: ROHS3 Compliant

The identified substitute parts maintain these core electrical and mechanical parameters. Variations in insulation material (LCP versus PBT) and insulation height (within 0.003" tolerance) do not affect functional compatibility in board-to-board or cable applications where these parameters are not design-critical constraints.

Parameter Comparison

Engineering Selection Recommendations

All listed substitute parts maintain active product status and ROHS3 compliance, ensuring long-term availability and regulatory alignment with the HTSW-114-10-L-S-RE.

HTSW-114-09-L-S-RA is the primary equivalent within the same HTSW series, offering identical electrical and mechanical specifications with LCP insulation material matching the main part.

TSW-114-09-L-S-RA and TSW-114-09-L-S-RE are functionally compatible alternatives from the TSW series. These parts employ PBT insulation material and feature a 0.003" reduction in insulation height (3.02mm versus 3.10mm). Both TSW variants maintain all critical electrical parameters, contact geometry, and thermal operating range. Selection between these options depends on PCB layout constraints and mechanical clearance requirements specific to the application.

Frequently Asked Questions (FAQ)

Q: Can TSW-114-09-L-S-RA be used as a direct replacement for HTSW-114-10-L-S-RE?

A: Yes. Both parts share identical pitch (0.100"), position count (14), contact type (male pin), mounting style (through-hole right-angle), and termination method (solder). The insulation material differs (PBT versus LCP) and insulation height is 0.003" lower, but these do not affect electrical or mechanical compatibility in standard board-to-board applications.

Q: What is the difference between HTSW and TSW series headers?

A: The HTSW series uses Liquid Crystal Polymer (LCP) insulation with 0.122" insulation height. The TSW series uses Polybutylene Terephthalate (PBT) insulation with 0.119" insulation height. Both series maintain identical pitch, position count, contact materials, and operating temperature range.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. HTSW-114-10-L-S-RE, HTSW-114-09-L-S-RA, TSW-114-09-L-S-RA, and TSW-114-09-L-S-RE are all ROHS3 compliant.

Q: Does insulation material affect signal integrity?

A: Insulation material selection (LCP or PBT) does not affect the electrical performance parameters provided for these connector headers. Both materials meet UL94 V-0 flammability requirements and support the full operating temperature range of -55°C to 125°C.

Q: What packaging options are available?

A: HTSW-114-10-L-S-RE is available in standard packaging. HTSW-114-09-L-S-RA, TSW-114-09-L-S-RA, and TSW-114-09-L-S-RE are available in bulk packaging.