HTSW-113-24-T-S Equivalent & Substitute Parts

Part Overview

The HTSW-113-24-T-S is an active rectangular connector header manufactured by Samtec Inc. This through-hole connector features 13 positions at 0.100" (2.54mm) pitch and is designed for board-to-board or cable applications. The connector utilizes male pins with solder termination and push-pull fastening. Finding equivalent or substitute parts may be necessary due to inventory constraints, supply chain considerations, or specific application requirements while maintaining electrical and mechanical compatibility.

Key Parameters

Parameter	Value
Manufacturer Part Number	HTSW-113-24-T-S
Manufacturer	Samtec Inc.
Category	Rectangular Connectors
Connector Type	Header
Contact Type	Male Pin
Pitch - Mating	0.100" (2.54mm)
Number of Positions	13
Number of Rows	1
Mounting Type	Through Hole
Termination	Solder
Fastening Type	Push-Pull
Operating Temperature	-55°C ~ 105°C
Material Flammability Rating	UL94 V-0
RoHS Status	ROHS3 Compliant
Product Status	Active

Substitute Part Grouping Explanation

Substitution eligibility for the HTSW-113-24-T-S is determined by strict alignment of the following critical parameters:

Pitch - Mating: 0.100" (2.54mm)
Number of Positions: 13
Number of Rows: 1
Connector Type: Header
Contact Type: Male Pin
Mounting Type: Through Hole
Termination: Solder
Fastening Type: Push-Pull
Operating Temperature Range: -55°C ~ 105°C
Material Flammability Rating: UL94 V-0
RoHS Status: ROHS3 Compliant

The TSW-113-24-T-S meets all critical substitution criteria. Both connectors share identical mating pitch, position count, row configuration, contact type, mounting method, termination type, fastening mechanism, operating temperature range, flammability rating, and RoHS compliance status. Variations in insulation material (Liquid Crystal Polymer vs. Polybutylene Terephthalate) and insulation color do not affect electrical or mechanical compatibility for standard applications.

Parameter Comparison

Parameter	HTSW-113-24-T-S	TSW-113-24-T-S
Manufacturer	Samtec Inc.	Samtec Inc.
Connector Type	Header	Header
Contact Type	Male Pin	Male Pin
Pitch - Mating	0.100" (2.54mm)	0.100" (2.54mm)
Number of Positions	13	13
Number of Rows	1	1
Mounting Type	Through Hole	Through Hole
Termination	Solder	Solder
Fastening Type	Push-Pull	Push-Pull
Contact Length - Mating	0.265" (6.73mm)	0.265" (6.73mm)
Contact Length - Post	0.115" (2.92mm)	0.115" (2.92mm)
Overall Contact Length	0.480" (12.19mm)	0.480" (12.19mm)
Insulation Height	0.100" (2.54mm)	0.100" (2.54mm)
Contact Shape	Square	Square
Contact Finish - Mating	Tin	Tin
Contact Finish - Post	Tin	Tin
Contact Material	Phosphor Bronze	Phosphor Bronze
Operating Temperature	-55°C ~ 105°C	-55°C ~ 105°C
Material Flammability Rating	UL94 V-0	UL94 V-0
Insulation Color	Natural	Black
Insulation Material	Liquid Crystal Polymer (LCP)	Polybutylene Terephthalate (PBT)
RoHS Status	ROHS3 Compliant	ROHS3 Compliant
Product Status	Active	Active

Engineering Selection Recommendations

Both the HTSW-113-24-T-S and TSW-113-24-T-S are active products manufactured by Samtec Inc. and maintain full ROHS3 compliance. Selection between these parts should be based on the following factors:

The HTSW-113-24-T-S features Liquid Crystal Polymer (LCP) insulation with natural color and is suitable for applications requiring enhanced thermal and chemical resistance properties associated with LCP materials.

The TSW-113-24-T-S features Polybutylene Terephthalate (PBT) insulation with black color and is suitable for applications where PBT material characteristics are acceptable or preferred.

Both connectors maintain identical electrical and mechanical specifications, including contact geometry, pitch, position count, operating temperature range, and flammability rating. The choice between these parts depends on insulation material requirements and visual identification preferences specific to the application.

Frequently Asked Questions (FAQ)

Q: Can TSW-113-24-T-S be used as a direct replacement for HTSW-113-24-T-S?

A: Yes. Both connectors share identical mating pitch (0.100"), position count (13), row configuration (1), contact type (male pin), mounting method (through hole), termination (solder), and fastening type (push-pull). Operating temperature ranges, flammability ratings, and RoHS compliance are identical.

Q: What is the difference between these two connectors?

A: The primary differences are insulation material and color. HTSW-113-24-T-S uses Liquid Crystal Polymer (LCP) with natural insulation color, while TSW-113-24-T-S uses Polybutylene Terephthalate (PBT) with black insulation color. These material differences do not affect electrical or mechanical compatibility for standard applications.

Q: Are there any compatibility concerns when substituting between these parts?

A: No compatibility concerns exist for standard applications. Both connectors maintain identical contact geometry, pitch spacing, and electrical characteristics. Insulation material and color variations do not impact mating or functional performance.

Q: Which part should be selected for new designs?

A: Selection should be based on specific application requirements regarding insulation material properties. LCP (HTSW series) offers enhanced thermal and chemical resistance, while PBT (TSW series) provides established performance characteristics. Both are active products with full manufacturer support.

Q: Are both parts RoHS compliant?

A: Yes. Both HTSW-113-24-T-S and TSW-113-24-T-S are ROHS3 compliant and suitable for applications requiring RoHS certification.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message