HTSW-110-26-G-S Equivalent & Substitute Parts

Part Overview

The HTSW-110-26-G-S is an active rectangular connector header manufactured by Samtec Inc. This through-hole vertical header features 10 positions at 0.100" (2.54mm) pitch and is designed for board-to-board or cable interconnection applications. The connector utilizes solder termination with push-pull fastening and is constructed with phosphor bronze contacts finished in gold. Finding equivalent substitute parts is necessary to ensure design flexibility, manage supply chain continuity, and accommodate specific application requirements while maintaining electrical and mechanical compatibility.

Substiute Parts

HTSW-110-26-G-S

Samtec Inc.In Stock: 718HTSW-110-26-G-S Datasheet

Current PartRFQ

TSW-110-26-G-S

Samtec Inc.In Stock: 1154TSW-110-26-G-S Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the HTSW-110-26-G-S is determined by strict alignment of the following critical parameters:

• Connector type (Header)
• Contact type (Male Pin)
• Number of positions (10)
• Pitch - mating (0.100" / 2.54mm)
• Mounting type (Through Hole)
• Termination method (Solder)
• Contact material (Phosphor Bronze)
• Contact finish - mating (Gold)
• Operating temperature range (-55°C ~ 125°C)
• Material flammability rating (UL94 V-0)
• RoHS compliance status (ROHS3 Compliant)

The TSW-110-26-G-S meets all substitution criteria. Both parts share identical electrical and mechanical specifications for mating interface, contact configuration, and environmental performance. Differences in insulation material (LCP vs. PBT) and insulation color do not affect functional compatibility in standard applications.

Parameter Comparison

Engineering Selection Recommendations

Both the HTSW-110-26-G-S and TSW-110-26-G-S are active products from Samtec Inc. with identical compliance certifications. Both parts are ROHS3 compliant and carry UL94 V-0 material flammability ratings, meeting regulatory requirements for industrial and commercial applications.

The primary distinction between these parts is the insulation material composition: the HTSW series uses Liquid Crystal Polymer (LCP) while the TSW series uses Polybutylene Terephthalate (PBT). Both materials meet the same flammability and operating temperature specifications. Selection between these parts should be based on application-specific requirements related to insulation material properties and availability.

Frequently Asked Questions (FAQ)

Q: Can TSW-110-26-G-S be used as a direct replacement for HTSW-110-26-G-S?

A: Yes. Both parts share identical electrical and mechanical specifications for the mating interface, contact configuration, pitch, number of positions, and operating temperature range. The parts are functionally interchangeable in standard applications.

Q: What is the difference between the HTSW and TSW series?

A: The primary difference is the insulation material. HTSW uses Liquid Crystal Polymer (LCP) insulation, while TSW uses Polybutylene Terephthalate (PBT) insulation. Both materials meet UL94 V-0 flammability requirements and support the same operating temperature range of -55°C to 125°C.

Q: Are there any compliance or certification differences between these parts?

A: No. Both parts are ROHS3 compliant, carry EAR99 ECCN classification, and share the same HTSUS code (8536.69.4040). Both are rated UL94 V-0 for material flammability.

Q: Does the insulation color difference affect compatibility?

A: No. The insulation color (Natural for HTSW vs. Black for TSW) is a visual distinction only and does not affect electrical or mechanical performance.

Q: What is the moisture sensitivity level for these parts?

A: The HTSW-110-26-G-S has MSL listed as Not Applicable. The TSW-110-26-G-S has MSL 1 (Unlimited), indicating no moisture sensitivity restrictions for either part.

Q: Are both parts currently in production?

A: Yes. Both the HTSW-110-26-G-S and TSW-110-26-G-S are listed as Active products with current inventory availability.