HTSW-106-27-G-S Equivalent & Substitute Parts

Part Overview

The HTSW-106-27-G-S is a rectangular connector header manufactured by Samtec Inc., designed for through-hole mounting applications. This vertical 6-position connector operates at 0.100" (2.54mm) pitch and is classified as active product status. Substitute parts are identified when equivalent electrical and mechanical parameters align with application requirements, enabling component interchangeability in board-to-board or cable connection designs.

Substiute Parts

HTSW-106-27-G-S

Samtec Inc.In Stock: 928HTSW-106-27-G-S Datasheet

Current PartRFQ

TSW-106-27-G-S

Samtec Inc.In Stock: 888TSW-106-27-G-S Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the HTSW-106-27-G-S is determined by the following critical parameters:

• Connector type (Header)
• Contact type (Male Pin)
• Number of positions (6)
• Pitch - mating (0.100" / 2.54mm)
• Mounting type (Through Hole)
• Operating temperature range (-55°C ~ 125°C)
• Contact finish - mating (Gold)
• Material flammability rating (UL94 V-0)
• RoHS compliance status (ROHS3 Compliant)

The TSW-106-27-G-S meets all critical substitution criteria. Both connectors share identical electrical and mechanical specifications for mating interface, contact configuration, and thermal operating range. Both maintain UL94 V-0 flammability rating and ROHS3 compliance.

Parameter Comparison

Engineering Selection Recommendations

Both HTSW-106-27-G-S and TSW-106-27-G-S are active products from Samtec Inc. with identical electrical and mechanical specifications. Both maintain ROHS3 compliance and UL94 V-0 flammability certification. Selection between these parts is based on insulation material availability: HTSW series uses Liquid Crystal Polymer (LCP) insulation with natural color, while TSW series uses Polybutylene Terephthalate (PBT) insulation with black color. Both materials support the specified operating temperature range and mechanical requirements. Inventory availability and lead time considerations may influence part selection.

Frequently Asked Questions (FAQ)

Q: Are HTSW-106-27-G-S and TSW-106-27-G-S mechanically interchangeable?

A: Yes. Both connectors share identical mating pitch (0.100" / 2.54mm), contact configuration (6 male pins), mounting type (through hole), and overall contact dimensions. Physical board layout compatibility is maintained.

Q: What is the difference between these substitute parts?

A: The primary differences are insulation material and color. HTSW-106-27-G-S uses Liquid Crystal Polymer (LCP) with natural insulation color. TSW-106-27-G-S uses Polybutylene Terephthalate (PBT) with black insulation color. Both materials meet UL94 V-0 flammability requirements and support the -55°C ~ 125°C operating temperature range.

Q: Do both parts meet the same compliance standards?

A: Yes. Both HTSW-106-27-G-S and TSW-106-27-G-S are ROHS3 compliant, carry UL94 V-0 flammability rating, and share identical ECCN (EAR99) and HTSUS (8536.69.4040) classifications.

Q: Can I use TSW-106-27-G-S as a direct replacement for HTSW-106-27-G-S?

A: Direct substitution is supported when insulation material and color differences do not impact application requirements. Verify that board design and assembly processes accommodate the alternative insulation material properties.

Q: What determines if a part qualifies as a substitute?

A: Substitution eligibility requires matching connector type, contact type, number of positions, mating pitch, mounting type, operating temperature range, contact finish specifications, and compliance certifications. Differences in insulation material or color do not prevent substitution when these core parameters align.