HTST-117-01-L-DV-P Equivalent & Substitute Parts

Part Overview

The HTST-117-01-L-DV-P is a surface mount rectangular connector header manufactured by Samtec Inc. in the Flex Stack series. This 34-position, 2-row connector with 0.100" (2.54mm) pitch is designed for board-to-cable/wire applications with push-pull fastening and shrouded 4-wall construction. The part is currently active in production with 731 units in stock. Substitute parts are identified when equivalent electrical and mechanical parameters are required due to inventory constraints, design flexibility, or supply chain considerations.

Substiute Parts

HTST-117-01-L-DV-P

Samtec Inc.In Stock: 751HTST-117-01-L-DV-P Datasheet

Current PartRFQ

N2534-6V0C-RB-WF

3MIn Stock: 4767N2534-6V0C-RB-WF Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

The substitute part N2534-6V0C-RB-WF from 3M is classified as an equivalent based on the following critical parameters:

Matching Parameters:

• Connector type: Header
• Contact type: Male Pin
• Number of positions: 34
• Number of rows: 2
• Pitch - mating: 0.100" (2.54mm)
• Row spacing - mating: 0.100" (2.54mm)
• Mounting type: Surface Mount
• Shrouding: Shrouded - 4 Wall
• Fastening type: Push-Pull
• Termination: Solder
• Contact shape: Square
• Material flammability rating: UL94 V-0

These parameters define the physical and electrical compatibility envelope for rectangular connector header substitution in this product category.

Parameter Comparison

Engineering Selection Recommendations

Both the HTST-117-01-L-DV-P and N2534-6V0C-RB-WF are active production parts with UL94 V-0 flammability ratings and RoHS compliance. The primary differences are in current rating per contact (3.4A versus 1.75A), maximum operating temperature (125°C versus 105°C), and insulation material composition. Selection between these parts should be based on the specific current and temperature requirements of the application. The HTST-117-01-L-DV-P supports higher current density and extended temperature operation. Both parts are suitable for surface mount assembly with identical pitch, position count, and fastening characteristics.

Frequently Asked Questions (FAQ)

Q: Can N2534-6V0C-RB-WF be used as a direct replacement for HTST-117-01-L-DV-P?

A: Both connectors share identical mating pitch (0.100"), position count (34), row configuration (2 rows), mounting type (surface mount), shrouding (4-wall), and fastening mechanism (push-pull). Physical and electrical compatibility is established for these core parameters. Application-specific requirements for current rating and operating temperature must be verified.

Q: What are the key differences between these two parts?

A: The HTST-117-01-L-DV-P provides 3.4A per contact and operates to 125°C, while the N2534-6V0C-RB-WF provides 1.75A per contact and operates to 105°C. Insulation materials differ: LCP versus PCT glass-filled. Contact length and insulation height also vary slightly.

Q: Are both parts available in the same packaging format?

A: No. The HTST-117-01-L-DV-P is supplied in Tube packaging, while the N2534-6V0C-RB-WF is supplied in Cut Tape (CT) packaging. This affects handling, storage, and pick-and-place assembly considerations.

Q: Do both connectors meet the same compliance standards?

A: Both parts carry UL94 V-0 flammability ratings and RoHS compliance. The HTST-117-01-L-DV-P is ROHS3 compliant, while the N2534-6V0C-RB-WF is RoHS compliant. Both are classified as EAR99 for export control purposes.

Q: Which part should be selected for high-current applications?

A: The HTST-117-01-L-DV-P is rated for 3.4A per contact, making it suitable for higher current density applications compared to the N2534-6V0C-RB-WF at 1.75A per contact.