HTST-113-01-L-DV-TR Equivalent & Substitute Parts

Part Overview

The HTST-113-01-L-DV-TR is a surface mount rectangular connector header manufactured by Samtec Inc. in the Flex Stack series. This 26-position, 2-row connector with 0.100" (2.54mm) pitch is designed for board-to-cable/wire applications with push-pull fastening and shrouded 4-wall construction. The part maintains active product status and is RoHS3 compliant. Substitute parts are identified when equivalent electrical and mechanical parameters align with the core connector specifications, enabling component interchangeability in applications where the original part may be unavailable or where alternative packaging formats are preferred.

Substiute Parts

HTST-113-01-L-DV-TR

Samtec Inc.In Stock: 920HTST-113-01-L-DV-TR Datasheet

Current PartRFQ

N2526-6V0C-RB-WE

3MIn Stock: 10310N2526-6V0C-RB-WE Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

The N2526-6V0C-RB-WE from 3M qualifies as a substitute based on alignment of critical electrical and mechanical parameters. Both connectors share identical specifications for connector type (header), contact type (male pin), number of positions (26), number of rows (2), mating pitch (0.100"/2.54mm), row spacing (0.100"/2.54mm), mounting type (surface mount), shrouding configuration (shrouded 4-wall), fastening type (push-pull), termination method (solder), and material flammability rating (UL94 V-0). Both parts are active products with RoHS compliance. The substitute maintains functional and dimensional compatibility within the allowed parameter tolerances for this connector category.

Parameter Comparison

Engineering Selection Recommendations

Both the HTST-113-01-L-DV-TR and N2526-6V0C-RB-WE maintain active product status and meet UL94 V-0 flammability requirements. The Samtec part supports an operating temperature range of -55°C to 125°C, while the 3M substitute operates from -55°C to 105°C. Selection between these parts depends on application temperature requirements. The Samtec connector is supplied in Tape & Reel packaging, while the 3M alternative is available in Cut Tape format. Both parts are RoHS compliant, with the Samtec part meeting ROHS3 specifications and the 3M part meeting general RoHS compliance. Component selection should be based on temperature operating range requirements, packaging format availability, and supply chain considerations.

Frequently Asked Questions (FAQ)

Q: What are the critical parameters that define substitution eligibility for the HTST-113-01-L-DV-TR?

A: Substitution is determined by matching connector type (header), contact type (male pin), number of positions (26), number of rows (2), mating pitch (0.100"/2.54mm), row spacing (0.100"/2.54mm), mounting type (surface mount), shrouding configuration (shrouded 4-wall), fastening type (push-pull), termination method (solder), and material flammability rating (UL94 V-0).

Q: Are there differences in operating temperature between the main part and substitute?

A: Yes. The HTST-113-01-L-DV-TR operates from -55°C to 125°C, while the N2526-6V0C-RB-WE operates from -55°C to 105°C. Applications requiring operation above 105°C must use the Samtec part.

Q: What packaging formats are available for these connectors?

A: The HTST-113-01-L-DV-TR is supplied in Tape & Reel (TR) packaging. The N2526-6V0C-RB-WE is supplied in Cut Tape (CT) packaging. Packaging selection affects handling, storage, and automated assembly processes.

Q: Are both parts RoHS compliant?

A: Yes. The HTST-113-01-L-DV-TR is ROHS3 compliant. The N2526-6V0C-RB-WE is RoHS compliant. Both parts meet regulatory requirements for restricted substance elimination.

Q: Can these connectors be used interchangeably in board-to-cable applications?

A: Both connectors are designed for board-to-cable/wire applications with identical mating pitch, row spacing, and push-pull fastening. Mechanical and electrical compatibility is established through matching core parameters. Application-specific requirements such as operating temperature range and packaging format must be evaluated for final component selection.