HTMS-150-02-G-D Equivalent & Substitute Parts

Part Overview

The HTMS-150-02-G-D is a rectangular connector header manufactured by Samtec Inc., designed for through-hole board-to-board applications. This unshrouded header features 100 positions arranged in 2 rows with 0.050" (1.27mm) pitch and push-pull fastening. The connector is actively produced and widely used in applications requiring reliable solder termination and gold-plated contacts. Alternative parts may be required due to inventory constraints, lead time considerations, or specific application requirements within the allowed electrical and mechanical parameter ranges.

Substiute Parts

HTMS-150-02-G-D

Samtec Inc.In Stock: 826HTMS-150-02-G-D Datasheet

Current PartRFQ

6-103916-7

TE Connectivity AMP ConnectorsIn Stock: 9006-103916-7 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the HTMS-150-02-G-D is based on strict alignment of the following critical parameters:

• Connector type (Header) and contact type (Male Pin)
• Mating pitch of 0.050" (1.27mm) and row spacing of 0.100" (2.54mm)
• Position count of 100 with 2-row configuration
• Through-hole mounting with solder termination
• Push-pull fastening mechanism
• Gold-plated mating contacts
• UL94 V-0 flammability rating
• ROHS3 compliance

The substitute part 6-103916-7 from TE Connectivity meets these core substitution criteria. Both parts share identical mating pitch, position count, row configuration, mounting type, and termination method. Both are actively produced, ROHS3 compliant, and rated UL94 V-0.

Parameter Comparison

Engineering Selection Recommendations

Both the HTMS-150-02-G-D and 6-103916-7 are actively produced components with ROHS3 compliance and UL94 V-0 flammability certification. Selection between these parts should be based on the following provided specifications:

The HTMS-150-02-G-D operates across a wider temperature range (-55°C to 125°C) compared to the 6-103916-7 (-65°C to 105°C). Applications requiring sustained operation above 105°C should use the Samtec part.

The HTMS-150-02-G-D specifies a current rating of 5A per contact, while the 6-103916-7 does not provide this specification. Applications with defined current requirements should reference the Samtec datasheet.

The 6-103916-7 specifies a voltage rating of 30VAC, while the HTMS-150-02-G-D does not provide this specification. Applications with defined voltage requirements should reference the TE Connectivity datasheet.

Contact geometry differs between the two parts: the HTMS-150-02-G-D has a mating contact length of 0.100" with a 0.120" post length, while the 6-103916-7 has a mating contact length of 0.125" with a 0.100" post length. PCB layout and mating depth requirements must be evaluated for each application.

Both parts feature gold-plated mating contacts with UL94 V-0 insulation material and unlimited moisture sensitivity rating, supporting use in general industrial, automotive, medical, and telecommunications applications.

Frequently Asked Questions (FAQ)

Q: Can the 6-103916-7 directly replace the HTMS-150-02-G-D in existing designs?

A: Both parts share identical mating pitch (0.050"), position count (100), row configuration (2 rows), and row spacing (0.100"). However, contact geometry differs. The HTMS-150-02-G-D has a 0.100" mating contact length with 0.120" post length, while the 6-103916-7 has a 0.125" mating contact length with 0.100" post length. PCB layout, mating depth, and connector cavity design must be evaluated for compatibility.

Q: What are the key electrical differences between these parts?

A: The HTMS-150-02-G-D specifies 5A per contact current rating. The 6-103916-7 specifies 30VAC voltage rating. Applications with specific electrical requirements should reference the respective manufacturer datasheets to confirm suitability.

Q: Which part should be used for high-temperature applications?

A: The HTMS-150-02-G-D supports operating temperatures from -55°C to 125°C, while the 6-103916-7 supports -65°C to 105°C. For applications requiring sustained operation above 105°C, the HTMS-150-02-G-D is the appropriate selection.

Q: Are both parts RoHS compliant?

A: Yes, both the HTMS-150-02-G-D and 6-103916-7 are ROHS3 compliant with UL94 V-0 flammability rating and MSL 1 (Unlimited) moisture sensitivity level.

Q: What is the difference in insulation material?

A: The HTMS-150-02-G-D uses Liquid Crystal Polymer (LCP) insulation, while the 6-103916-7 uses Thermoplastic insulation. Both materials meet UL94 V-0 requirements.

Q: Do these parts support board-to-board applications?

A: The HTMS-150-02-G-D is specified for board-to-board style. The 6-103916-7 supports board-to-board or cable style applications. Both are through-hole mounted with solder termination and push-pull fastening.