HT13CN222JC Equivalent & Substitute Parts

Part Overview

The HT13CN222JC is a 2200 pF ceramic capacitor rated at 100V with C0G/NP0 temperature coefficient, manufactured by KEMET as part of the HTHP LDD Industrial series. This component is designed for general-purpose applications requiring stable capacitance across a wide temperature range (-55°C to 200°C). The part is classified as obsolete, making identification of suitable substitutes essential for ongoing system support and procurement planning.

Substiute Parts

HT13CN222JC

KEMETIn Stock: 1083HT13CN222JC Datasheet

Current PartRFQ

SA301A222FAR

KYOCERA AVXIn Stock: 664SA301A222FAR Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the HT13CN222JC is determined by the following critical parameters:

Primary Matching Criteria:

• Capacitance value: 2200 pF (exact match required)
• Voltage rating: 100V (minimum requirement)
• Temperature coefficient: C0G or NP0 (functionally equivalent designations)
• Mounting type: Through Hole (axial configuration)
• Lead style: Straight leads

Secondary Considerations:

• Tolerance specification (±5% or tighter acceptable)
• Operating temperature range (substitute must support minimum -55°C to 125°C; extended high-temperature capability is application-dependent)
• Physical dimensions (axial package with compatible lead spacing for PCB hole patterns)

The SA301A222FAR from KYOCERA AVX meets all primary matching criteria and qualifies as a direct substitute.

Parameter Comparison

Engineering Selection Recommendations

SA301A222FAR as Primary Substitute:

The SA301A222FAR is the qualified substitute for the obsolete HT13CN222JC based on the following factors:

1. Electrical Equivalence: Both components share identical capacitance (2200 pF), voltage rating (100V), and temperature coefficient (C0G/NP0). The SA301A222FAR provides superior tolerance (±1% versus ±5%), which represents an improvement in capacitance stability.

2. Product Status: The SA301A222FAR is classified as Active, ensuring long-term availability and supply chain continuity. This addresses the obsolescence status of the HT13CN222JC.

3. Compliance & Certifications: The SA301A222FAR is RoHS3 Compliant and REACH Unaffected, meeting current regulatory requirements for electronic components.

4. Temperature Range Consideration: The SA301A222FAR operates from -55°C to 125°C. Applications requiring operation above 125°C must be evaluated against actual system requirements, as the HT13CN222JC supports extended operation to 200°C.

5. Physical Compatibility: Both components use axial through-hole mounting with straight leads. Dimensional differences (0.150" Dia x 0.290" L for SA301A222FAR versus 0.135" Dia x 0.260" L for HT13CN222JC) are within typical PCB design tolerances for axial component placement.

Frequently Asked Questions (FAQ)

Q: Can the SA301A222FAR directly replace the HT13CN222JC in all applications?

A: The SA301A222FAR is electrically and mechanically compatible for applications operating within -55°C to 125°C. Applications requiring sustained operation above 125°C require thermal analysis to confirm the SA301A222FAR's suitability, as the original HT13CN222JC supports operation to 200°C.

Q: What is the significance of the tolerance difference (±5% versus ±1%)?

A: The SA301A222FAR's ±1% tolerance provides tighter capacitance control compared to the HT13CN222JC's ±5% tolerance. This represents improved component consistency and may benefit applications with strict capacitance requirements. Existing designs based on ±5% tolerance remain compatible with the tighter ±1% specification.

Q: Are there physical installation differences between these components?

A: Both components use axial through-hole mounting with straight leads. The SA301A222FAR is slightly larger (0.150" Dia x 0.290" L versus 0.135" Dia x 0.260" L). Verify PCB hole spacing and component clearance before installation. Standard axial component spacing typically accommodates this dimensional variation.

Q: What packaging formats are available?

A: The HT13CN222JC is supplied in bulk packaging. The SA301A222FAR is available in Tape & Reel (TR) format, which is standard for production environments and automated assembly processes.

Q: Are there regulatory or compliance considerations?

A: The SA301A222FAR meets RoHS3 and REACH requirements, ensuring compliance with current environmental and hazardous substance regulations. Verify that your application and supply chain requirements align with these certifications.

Q: How should I verify compatibility in my specific application?

A: Confirm that your application's operating temperature range falls within -55°C to 125°C. Verify PCB hole spacing accommodates the SA301A222FAR's dimensions. Validate that the ±1% tolerance meets or exceeds your circuit's capacitance requirements.