HT-13-14 Ring Terminal Connector 10-12 AWG 1/4 Stud Equivalent & Substitute Parts

Part Overview

The HT-13-14 is a non-insulated ring terminal connector manufactured by 3M, designed for 10-12 AWG wire gauges with a 1/4 inch stud connection. This circular terminal features a crimp termination method and is constructed with a steel contact material finished in nickel. The part is currently active in production with 801 pieces available in inventory. Ring terminal connectors of this specification are essential components in electrical assemblies where secure, low-resistance connections between wire and stud-mounted hardware are required. Equivalent substitute parts may be necessary due to supply chain considerations, inventory availability, or specific application requirements.

Substiute Parts

HT-13-14

3MIn Stock: 854HT-13-14 Datasheet

Current PartRFQ

P10-14RHT6-L

Panduit CorpIn Stock: 1070P10-14RHT6-L Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the HT-13-14 is determined by strict equivalence across the following critical parameters:

• Terminal Type: Must be circular ring terminal
• Wire Gauge Compatibility: Must accommodate 10-12 AWG wire
• Stud Size: Must match 1/4 inch stud specification
• Termination Method: Must be crimp-type termination
• Insulation Classification: Must be non-insulated
• Mounting Configuration: Must be free hanging (in-line) style
• Contact Finish: Must be nickel-plated for corrosion resistance and electrical performance
• Regulatory Compliance: Must maintain RoHS compliance status

The substitute part P10-14RHT6-L from Panduit Corp meets all these criteria and is classified as a manufacturer-recommended equivalent. Both parts share identical wire gauge, stud size, termination method, and insulation specifications, enabling direct functional substitution in applications requiring HT-13-14 ring terminals.

Parameter Comparison

Engineering Selection Recommendations

Both the HT-13-14 and P10-14RHT6-L are active production parts with current RoHS compliance certification. The HT-13-14 maintains RoHS compliance status, while the P10-14RHT6-L achieves ROHS3 compliance, indicating alignment with current regulatory requirements. Both parts carry identical ECCN (EAR99) and HTSUS classifications, confirming equivalent trade and export status.

The primary differences between these parts are material composition and seam construction. The HT-13-14 uses a steel contact with butted seam construction, while the P10-14RHT6-L employs copper contact material with brazed seam construction. These variations do not affect functional compatibility for standard electrical applications requiring 10-12 AWG ring terminals on 1/4 inch studs. Selection between these parts should be based on inventory availability, lead time requirements, and established supplier relationships, as both meet the specified electrical and mechanical parameters.

Frequently Asked Questions (FAQ)

Q: Can P10-14RHT6-L be used as a direct replacement for HT-13-14?

A: Yes. Both parts are circular ring terminals rated for 10-12 AWG wire with 1/4 inch stud connection, crimp termination, and non-insulated construction. All critical electrical and mechanical parameters match, enabling direct substitution.

Q: What is the difference between butted seam and brazed seam construction?

A: Butted seam construction (HT-13-14) joins the terminal material by pressing edges together, while brazed seam construction (P10-14RHT6-L) uses a brazing process to fuse the seam. Both methods produce functional ring terminals meeting the specified performance requirements for this wire gauge and stud size.

Q: Does the difference in contact material (steel vs. copper) affect performance?

A: Both steel and copper contacts, when finished with nickel plating, provide adequate electrical conductivity and corrosion resistance for non-insulated ring terminal applications. The nickel finish is the primary factor determining electrical performance and environmental durability in both cases.

Q: Are both parts RoHS compliant?

A: Yes. The HT-13-14 is RoHS Compliant, and the P10-14RHT6-L is ROHS3 Compliant. Both meet current regulatory requirements for restricted substances in electrical components.

Q: What packaging is available for these parts?

A: Both the HT-13-14 and P10-14RHT6-L are supplied in bulk packaging, suitable for high-volume assembly operations and component inventory management.

Q: Are there any dimensional differences between these parts?

A: Minor dimensional variations exist. The HT-13-14 has a width of 0.610" (15.49mm) and overall length of 0.990" (25.15mm), while the P10-14RHT6-L measures 0.530" (13.46mm) in width and 0.960" (24.38mm) in length. Both maintain the same 0.040" (1.02mm) thickness. These variations do not affect functional compatibility for standard stud-mounted applications.