HT06DW104KN Equivalent & Substitute Parts

Part Overview

The HT06DW104KN is a 0.1 µF ceramic capacitor rated for 200V with X7R temperature coefficient, manufactured by KEMET. This component is classified as obsolete, indicating discontinued production and limited availability in the supply chain. The part is designed for general-purpose applications requiring high-temperature operation across the -55°C to 200°C range. Due to its obsolete status, identifying active equivalent parts is essential for design continuity and procurement planning.

Substiute Parts

HT06DW104KN

KEMETIn Stock: 923HT06DW104KN Datasheet

Current PartRFQ

HP06DW104KN

KEMETIn Stock: 1092HP06DW104KN Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the HT06DW104KN is determined by strict equivalence across the following parameters:

• Capacitance Value: 0.1 µF (exact match required)
• Voltage Rating: 200V (minimum acceptable rating)
• Tolerance: ±10% (electrical performance specification)
• Temperature Coefficient: X7R (dielectric material specification)
• Operating Temperature Range: -55°C to 200°C (thermal performance requirement)
• Mounting Type: Through Hole (assembly compatibility)
• Package Configuration: Radial (PCB layout compatibility)
• Lead Spacing: 0.200" (5.08mm) (footprint compatibility)
• Physical Dimensions: 0.300" L x 0.150" W (mechanical fit requirement)

Substitute parts must match all parameters listed above to ensure functional and mechanical compatibility without design modification.

Parameter Comparison

Engineering Selection Recommendations

The HP06DW104KN is a direct parametric equivalent to the HT06DW104KN. Both parts are manufactured by KEMET within the same industrial-grade X7R series and share identical electrical and mechanical specifications. The primary distinction is product status: the HT06DW104KN is obsolete while the HP06DW104KN is active in production.

For new designs or component replenishment, the HP06DW104KN is the appropriate selection due to its active status and confirmed availability. Both parts carry identical export classification (EAR99) and tariff codes (8532.24.0060), indicating equivalent regulatory compliance. The HP06DW104KN maintains REACH Unaffected status, confirming compliance with European chemical regulations.

No design modifications are required when substituting the HP06DW104KN for the HT06DW104KN. PCB layouts, schematic designations, and assembly procedures remain unchanged.

Frequently Asked Questions (FAQ)

Q: Can the HP06DW104KN be used as a direct replacement for the HT06DW104KN without PCB modification?

A: Yes. Both parts are identical in electrical performance, physical dimensions, lead spacing, and mounting configuration. No PCB layout changes are required.

Q: What is the significance of the product status difference between these parts?

A: The HT06DW104KN is obsolete, meaning KEMET has discontinued production. The HP06DW104KN is active, indicating current manufacturing and reliable supply chain availability. For procurement planning, the active part is the appropriate choice.

Q: Are the electrical characteristics identical between these two parts?

A: Yes. Both parts specify 0.1 µF capacitance at ±10% tolerance, 200V voltage rating, X7R temperature coefficient, and -55°C to 200°C operating range. Electrical performance is equivalent.

Q: Do these parts have the same regulatory compliance?

A: Yes. Both parts carry EAR99 export classification and 8532.24.0060 tariff code. The HP06DW104KN additionally confirms REACH Unaffected status.

Q: What is the lead spacing specification, and why is it important?

A: Both parts have 0.200" (5.08mm) lead spacing. This specification determines PCB hole pattern compatibility and ensures mechanical fit without modification.

Q: Can these parts be used interchangeably in existing assemblies?

A: Yes. The HP06DW104KN is a parametric equivalent suitable for direct substitution in any application currently using the HT06DW104KN.