HT06CB105JN Equivalent & Substitute Parts

Part Overview

The HT06CB105JN is a 1 µF, 100V ceramic capacitor manufactured by KEMET with X7R temperature coefficient and radial through-hole mounting. This component is classified as obsolete, necessitating identification of equivalent substitute parts for ongoing design support and procurement continuity. The part operates across an extended temperature range of -55°C to 200°C, making it suitable for high-temperature industrial applications.

Key Parameters

Parameter	Value
Capacitance	1 µF
Voltage Rating	100V
Tolerance	±5%
Temperature Coefficient	X7R
Mounting Type	Through Hole
Package Type	Radial
Lead Spacing	0.200" (5.08mm)
Operating Temperature Range	-55°C ~ 200°C

Substitute Part Grouping Explanation

Substitution of the HT06CB105JN is determined by strict equivalence across the following critical parameters:

Capacitance Value: 1 µF (exact match required)
Voltage Rating: 100V (minimum acceptable rating)
Tolerance: ±5% (electrical performance specification)
Temperature Coefficient: X7R (dielectric stability specification)
Mounting Configuration: Through Hole Radial (mechanical compatibility)
Lead Spacing: 0.200" (5.08mm) (PCB layout compatibility)

The substitute part SR401C105JARTR1 manufactured by KYOCERA AVX meets all core electrical parameters. Physical dimensions and operating temperature ranges differ between the main part and substitute; these variations are documented in the parameter comparison table below.

Parameter Comparison

Parameter	HT06CB105JN (KEMET)	SR401C105JARTR1 (KYOCERA AVX)	Match Status
Capacitance	1 µF	1 µF	Equivalent
Voltage Rating	100V	100V	Equivalent
Tolerance	±5%	±5%	Equivalent
Temperature Coefficient	X7R	X7R	Equivalent
Operating Temperature Range	-55°C ~ 200°C	-55°C ~ 125°C	Partial Match
Mounting Type	Through Hole	Through Hole	Equivalent
Package Type	Radial	Radial	Equivalent
Lead Spacing	0.200" (5.08mm)	0.200" (5.08mm)	Equivalent
Size / Dimension	0.300" L x 0.150" W (7.62mm x 3.81mm)	0.400" L x 0.150" W (10.16mm x 3.81mm)	Different
Height - Seated (Max)	0.300" (7.62mm)	0.460" (11.68mm)	Different
Product Status	Obsolete	Active	Substitute Available
Packaging	Radial	Tape & Reel (TR)	Different

Engineering Selection Recommendations

The SR401C105JARTR1 serves as a functional equivalent for the obsolete HT06CB105JN across all core electrical specifications: capacitance, voltage rating, tolerance, and temperature coefficient. Both components are classified as radial through-hole ceramic capacitors with identical lead spacing of 0.200" (5.08mm), ensuring PCB layout compatibility.

The SR401C105JARTR1 is currently in active production status with ROHS3 compliance and REACH unaffected designation, providing supply chain continuity for new designs and production runs.

Physical dimensions differ between the two parts. The SR401C105JARTR1 exhibits larger length (0.400" versus 0.300") and height (0.460" versus 0.300") specifications. These dimensional differences require verification against available PCB space and mechanical clearance constraints in the target application.

The operating temperature range of the SR401C105JARTR1 extends to 125°C maximum, compared to 200°C for the HT06CB105JN. Applications requiring sustained operation above 125°C require alternative component evaluation.

Frequently Asked Questions (FAQ)

Q: Can SR401C105JARTR1 be used as a direct replacement for HT06CB105JN?

A: The SR401C105JARTR1 is electrically equivalent across all core parameters: 1 µF capacitance, 100V rating, ±5% tolerance, and X7R temperature coefficient. Lead spacing is identical at 0.200" (5.08mm). Physical dimensions differ; PCB layout verification is required to confirm adequate space for the larger component body.

Q: What are the key differences between these two parts?

A: The primary differences are: (1) Physical dimensions—SR401C105JARTR1 is larger in length and height; (2) Operating temperature maximum—SR401C105JARTR1 rated to 125°C versus 200°C for HT06CB105JN; (3) Product status—SR401C105JARTR1 is active production while HT06CB105JN is obsolete; (4) Packaging format—SR401C105JARTR1 supplied in Tape & Reel format.

Q: Is the SR401C105JARTR1 suitable for high-temperature applications?

A: The SR401C105JARTR1 operates within the temperature range of -55°C to 125°C. Applications requiring operation above 125°C require alternative component selection.

Q: Are there any compliance or regulatory differences?

A: The SR401C105JARTR1 carries ROHS3 compliance and REACH unaffected status. Both components share identical ECCN (EAR99) and HTSUS (8532.24.0060) classifications.

Q: What packaging format is the substitute supplied in?

A: The SR401C105JARTR1 is supplied in Tape & Reel (TR) format, suitable for automated assembly processes. The original HT06CB105JN was supplied in radial bulk packaging.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message