HSM8100J/TR13 Equivalent & Substitute Parts Reference

Part Overview

The HSM8100J/TR13 from Microchip Technology is an active, surface-mount Schottky rectifier diode specified for 100 V reverse voltage and 8A average rectified current in a DO-214AB (SMC) package. It is utilized in power rectification, switching, and high-efficiency applications requiring fast recovery performance. Identifying alternative models is essential for cases involving inventory shortages, RoHS compliance requirements, or supply chain constraints.

Substiute Parts

HSM8100J/TR13

Microchip TechnologyIn Stock: 793HSM8100J/TR13 Datasheet

Current PartRFQ

HSM8100JE3/TR13

Microchip TechnologyIn Stock: 4360HSM8100JE3/TR13 Datasheet

Parametric EquivalentRFQ

SK810L-TP

Micro Commercial CoIn Stock: 1368SK810L-TP Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution is determined strictly by matching key electrical and mechanical parameters. Substitute parts are selected based on:

• Voltage - DC Reverse (Vr) (Max)
• Current - Average Rectified (Io)
• Voltage - Forward (Vf) (Max) @ If
• Speed (Recovery Time and Test Current)
• Current - Reverse Leakage @ Vr
• Mounting Type
• Package / Case
• Operating Temperature - Junction
• RoHS Status
• Product Status

Parts that meet or closely align with these constraints in the same product category and form factor (DO-214AB, SMC) are included.

Parameter Comparison

Engineering Selection Recommendations

RoHS status differentiates HSM8100J/TR13 (RoHS non-compliant) from its direct equivalent HSM8100JE3/TR13 and similar SK810L-TP (both ROHS3 compliant). For applications requiring RoHS compliance, HSM8100JE3/TR13 and SK810L-TP fulfill these requirements. Product status for all models is "Active," supporting sustained supply and qualification for new designs.

Frequently Asked Questions (FAQ)

Q1: Which key parameters must be matched for substitution in Schottky rectifier diodes?
A1: Fundamental substitution criteria are reverse voltage rating, average rectified current, forward voltage at test current, recovery speed, reverse leakage current, mounting type, package/case compatibility, operating temperature range, RoHS status, and product activity.

Q2: Can HSM8100JE3/TR13 be directly substituted for HSM8100J/TR13?
A2: Yes. HSM8100JE3/TR13 matches all specified electrical and mechanical parameters and shares a common DO-214AB package. RoHS status is upgraded to ROHS3 compliant.

Q3: What is the key distinction for SK810L-TP as a substitute?
A3: SK810L-TP matches voltage and current ratings, speed, and package but has slightly higher forward voltage (800 mV @ 8A), increased reverse leakage (1 mA @ 100 V), and a lower maximum junction temperature (-55°C ~ 150°C). RoHS status is ROHS3 compliant and package is DO-214AB.

Q4: Why is RoHS compliance a critical selection factor?
A4: RoHS compliance is necessary for manufacturing and distribution in regions requiring restriction of hazardous substances; substitutes must meet specified compliance levels for qualification.

Q5: Are all listed substitutes available in the DO-214AB, SMC package for surface-mount designs?
A5: Yes. All substitute part numbers utilize the DO-214AB, SMC package and are specified for surface-mount applications, allowing direct compatibility with existing layouts.