HSM360J/TR13 Equivalent & Substitute Parts Reference

Part Overview

The HSM360J/TR13, manufactured by Microchip Technology, is a Schottky diode classified under the "Diodes, Rectifiers" category. It is rated for 60 V reverse voltage and 3 A average rectified current with a fast recovery time and is housed in a DO-214AB surface-mount package. The product is active but RoHS non-compliant, which may present challenges for lead-free or environmentally regulated applications. Identifying equivalent or substitute models is necessary for ensuring supply continuity, supporting compliance requirements, or addressing inventory and availability concerns.

Key Parameters

Parameter	Specification
Technology	Schottky
Voltage - DC Reverse (Vr) (Max)	60 V
Current - Average Rectified (Io)	3 A
Voltage - Forward (Vf) (Max) @ If	620 mV @ 3 A
Speed	Fast Recovery =< 500ns, > 200mA (Io)
Current - Reverse Leakage @ Vr	100 µA @ 60 V
Mounting Type	Surface Mount
Package / Case	DO-214AB, SMC
Operating Temperature - Junction	-55°C ~ 175°C
RoHS Status	RoHS non-compliant

Substitute Part Grouping Explanation

Substitute parts for HSM360J/TR13 are grouped strictly using the following key parameters:

Schottky technology
Maximum reverse voltage: 60 V
Average rectified current rating: 3 A (or higher)
Surface mount configuration
DO-214AB (SMC) or compatible package outline
Comparable fast recovery behavior
Compliance attributes when specified

Only parts meeting all explicit criteria are included as substitutes. All substitute devices in the table below have been selected based on these parameters.

Parameter Comparison

Manufacturer Part Number	Manufacturer	Technology	Voltage - DC Reverse (Vr) (Max)	Current - Average Rectified (Io)	Voltage - Forward (Vf) (Max) @ If	Speed	Current - Reverse Leakage @ Vr	Mounting Type	Package / Case	Operating Temperature - Junction	RoHS Status	Product Status
HSM360J/TR13	Microchip Technology	Schottky	60 V	3 A	620 mV @ 3 A	Fast Recovery =< 500ns, > 200mA (Io)	100 µA @ 60 V	Surface Mount	DO-214AB, SMC	-55°C ~ 175°C	RoHS non-compliant	Active
B360-13-F	Diodes Incorporated	Schottky	60 V	3 A	700 mV @ 3 A	Fast Recovery =< 500ns, > 200mA (Io)	500 µA @ 60 V	Surface Mount	DO-214AB, SMC	-55°C ~ 150°C	ROHS3 Compliant	Active
CDBC360-G	Comchip Technology	Schottky	60 V	3 A	700 mV @ 3 A	Fast Recovery =< 500ns, > 200mA (Io)	500 µA @ 60 V	Surface Mount	DO-214AB, SMC	125°C (Max)	ROHS3 Compliant	Active
SK36-TP	Micro Commercial Co	Schottky	60 V	3 A	750 mV @ 3 A	Fast Recovery =< 500ns, > 200mA (Io)	500 µA @ 60 V	Surface Mount	DO-214AB, SMC	-55°C ~ 150°C	ROHS3 Compliant	Obsolete
SS36	MDD	Schottky	60 V	3 A	-	Fast Recovery =< 500ns, > 200mA (Io)	500 µA @ 60 V	Surface Mount	DO-214AC, SMA	-55°C ~ 150°C	ROHS3 Compliant	Active
STPS3L60S	STMicroelectronics	Schottky	60 V	3 A	700 mV @ 3 A	Fast Recovery =< 500ns, > 200mA (Io)	55 µA @ 60 V	Surface Mount	DO-214AB, SMC	150°C (Max)	ROHS3 Compliant	Active
STPS5L60S	STMicroelectronics	Schottky	60 V	5 A	520 mV @ 5 A	Fast Recovery =< 500ns, > 200mA (Io)	220 µA @ 60 V	Surface Mount	DO-214AB, SMC	150°C (Max)	ROHS3 Compliant	Active
STPS5L60SY	STMicroelectronics	Schottky	60 V	5 A	520 mV @ 5 A	Fast Recovery =< 500ns, > 200mA (Io)	220 µA @ 60 V	Surface Mount	DO-214AB, SMC	-40°C ~ 150°C	ROHS3 Compliant	Active

Engineering Selection Recommendations

Parts with the same or higher current rating, equivalent reverse voltage, Schottky technology, and matching mounting/package configuration qualify as direct substitutes.
Substitute parts marked as "Active" are appropriate for ongoing designs, while parts with a product status of "Obsolete" are not suitable for new designs.
For compliance-sensitive applications, RoHS-compliant substitutes such as B360-13-F, CDBC360-G, STPS3L60S, STPS5L60S, and STPS5L60SY can be selected, as HSM360J/TR13 is RoHS non-compliant.
Where a precise package match is required, only DO-214AB (SMC) substitutes should be selected.
Substitute parts with higher forward voltage or current leakage must meet system electrical requirements as specified in the original part parameters.

Frequently Asked Questions (FAQ)

Q1: What are the required criteria for selecting a substitute for HSM360J/TR13?
A1: Required criteria include Schottky technology, maximum reverse voltage of 60 V, average rectified current of at least 3 A, surface mount configuration, and DO-214AB (SMC) package.

Q2: Can a substitute with a higher current rating be used?
A2: Yes, substitute parts with a current rating equal to or greater than 3 A are allowed, as specified in the comparison parameters.

Q3: How critical is the package type for substitution?
A3: The DO-214AB (SMC) package is required for direct footprint and mounting compatibility.

Q4: Are all listed substitutes RoHS-compliant?
A4: Substitute parts B360-13-F, CDBC360-G, SK36-TP, SS36, STPS3L60S, STPS5L60S, and STPS5L60SY are RoHS compliant per the provided status.

Q5: Can a part with a different forward voltage or reverse leakage be substituted?
A5: Substitution is allowed as long as the parameters specified above are strictly within the requirements. Only the values explicitly provided in the input are used for comparison.

Q6: What should be considered regarding product status?
A6: Only active substitute parts should be selected for new designs. Obsolete parts, such as SK36-TP, are not maintained for current production.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message