HSEC8-150-01-S-RA-TR Equivalent & Substitute Parts

Part Overview

The HSEC8-150-01-S-RA-TR is a 100-position female card edge connector from Samtec Inc.'s Edge Rate™ HSEC8 series. This dual-edge connector features gold-plated beryllium copper contacts with a 0.031" (0.80mm) pitch and is designed for surface mount, right-angle applications with solder termination. The part is currently active in production and ROHS3 compliant. Substitute parts may be required due to packaging availability, inventory constraints, or specific application requirements while maintaining identical electrical and mechanical specifications.

Substiute Parts

HSEC8-150-01-S-RA-TR

Samtec Inc.In Stock: 999HSEC8-150-01-S-RA-TR Datasheet

Current PartRFQ

HSEC8-150-01-S-RA

Samtec Inc.In Stock: 784HSEC8-150-01-S-RA Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the HSEC8-150-01-S-RA-TR is based on maintaining identical electrical and mechanical parameters across the following critical specifications:

• 100-position configuration with dual-edge, female gender
• 0.031" (0.80mm) pitch contact spacing
• 0.062" (1.57mm) card thickness tolerance
• Surface mount, right-angle mounting orientation
• Beryllium copper contacts with gold plating (30.0µin thickness)
• Liquid crystal polymer insulation material
• Operating temperature range of -55°C to 125°C
• ROHS3 compliance and MSL 1 rating

The primary variable between the main part and its substitute is packaging format. The HSEC8-150-01-S-RA-TR is supplied in Tape & Reel (TR) packaging, while the substitute HSEC8-150-01-S-RA is supplied in Tray packaging. Both parts share the identical base product number (HSEC8-150) and all electrical and mechanical characteristics.

Parameter Comparison

Engineering Selection Recommendations

Both the HSEC8-150-01-S-RA-TR and HSEC8-150-01-S-RA are active production parts from Samtec Inc. with identical electrical and mechanical specifications. Selection between these parts should be based on packaging requirements and handling processes:

The Tape & Reel (TR) packaging format of the HSEC8-150-01-S-RA-TR is suitable for automated assembly processes and high-volume production environments. The Tray packaging format of the HSEC8-150-01-S-RA is suitable for manual assembly, lower-volume applications, or environments where tape-and-reel handling equipment is not available.

Both parts maintain ROHS3 compliance and MSL 1 (unlimited) moisture sensitivity rating, ensuring compatibility with standard PCB assembly processes and storage conditions. The identical contact material, finish thickness, and insulation properties guarantee functional interchangeability in all electrical and thermal applications within the specified operating range of -55°C to 125°C.

Frequently Asked Questions (FAQ)

Q: Are the HSEC8-150-01-S-RA-TR and HSEC8-150-01-S-RA electrically identical?

A: Yes. Both parts share identical electrical specifications including 100-position configuration, 0.031" pitch, beryllium copper contacts with gold plating, and operating temperature range of -55°C to 125°C.

Q: What is the difference between Tape & Reel and Tray packaging?

A: Tape & Reel (TR) packaging supplies components on a continuous carrier tape wound on a reel, optimized for automated pick-and-place assembly equipment. Tray packaging supplies components in a static-dissipative tray, suitable for manual handling and lower-volume assembly processes.

Q: Can I use the Tray-packaged part in an automated assembly line designed for Tape & Reel?

A: No. Automated assembly equipment is configured for specific packaging formats. Using Tray-packaged components in Tape & Reel equipment will cause assembly line disruption. Conversely, Tape & Reel components can be manually removed and used in manual assembly processes.

Q: Are both parts RoHS compliant?

A: Yes. Both the HSEC8-150-01-S-RA-TR and HSEC8-150-01-S-RA are ROHS3 compliant.

Q: What is the MSL rating for these connectors?

A: Both parts have an MSL rating of 1 (Unlimited), indicating no moisture sensitivity restrictions for storage or handling.

Q: Are there any mechanical differences between these parts?

A: No. Both parts have identical mechanical specifications including card thickness (0.062"), mounting type (surface mount, right angle), contact type (cantilever), and insulation material (liquid crystal polymer).