HSDNARPPCB19B Equivalent & Substitute Parts

Part Overview

The HSDNARPPCB19B is an HSD® Fakra Quadraxial Connector Plug manufactured by Amphenol ICC (Commercial Products). This component is a male pin connector with right angle through hole solder termination, designed for 100 Ohms impedance applications. The part is classified as Obsolete, necessitating identification of active equivalent components for ongoing procurement and design requirements. Substitute parts must maintain compatibility with the connector style, termination method, mounting configuration, and electrical specifications of the original design.

Substiute Parts

HSDNARPPCB19B

Amphenol ICC (Commercial Products)In Stock: 955HSDNARPPCB19B Datasheet

Current PartRFQ

HSDNARPPCB18A

Amphenol ICC (Commercial Products)In Stock: 1576HSDNARPPCB18A Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the obsolete HSDNARPPCB19B is based on strict alignment of the following critical parameters:

Connector Interface Compatibility:

• Connector Style: HSD®, Fakra, Quadraxial (must match for mechanical and electrical mating)
• Connector Type: Plug, Male Pin (must match for gender and pin configuration)
• Features: Code A (must match for Fakra code designation)

Termination and Mounting Compatibility:

• Contact Termination: Solder (must match for PCB assembly process)
• Shield Termination: Solder (must match for shield connection method)
• Mounting Type: Through Hole, Right Angle (must match for PCB footprint and orientation)
• Fastening Type: Latch Lock (must match for mating mechanism)

Electrical and Environmental Compatibility:

• Number of Ports: 1 (must match for circuit configuration)
• Housing Color: Black (must match for visual identification and material consistency)
• Center Contact Material: Copper Alloy (must match for electrical performance)
• Body Material: Zinc Alloy (must match for structural integrity)
• Body Finish: Tin (must match for corrosion resistance)
• Center Contact Plating: Gold (must match for contact reliability)
• Dielectric Material: Thermoplastic (must match for insulation properties)

Regulatory and Compliance Compatibility:

• ECCN: EAR99 (must match for export control classification)
• HTSUS Code: 8536.69.4010 (must match for tariff classification)

The HSDNARPPCB18A meets all substitution criteria and is classified as Active product status, providing long-term availability for procurement.

Parameter Comparison

Engineering Selection Recommendations

The HSDNARPPCB18A is the direct substitute for the obsolete HSDNARPPCB19B based on the following engineering criteria:

Product Status and Availability: The HSDNARPPCB19B is classified as Obsolete, which restricts long-term procurement viability. The HSDNARPPCB18A is classified as Active, ensuring continued availability and supply chain stability for current and future production requirements.

Mechanical and Electrical Compatibility: Both components share identical connector interface specifications (HSD® Fakra Quadraxial, Plug Male Pin, Code A), termination methods (Solder contact and shield), and mounting configuration (Through Hole, Right Angle). This ensures direct mechanical and electrical compatibility with existing PCB designs and mating connectors.

Regulatory Compliance: The HSDNARPPCB18A maintains RoHS3 compliance, which supersedes the RoHS compliance of the main part, ensuring adherence to current environmental regulations. Both components carry identical ECCN (EAR99) and HTSUS (8536.69.4010) classifications, maintaining consistent export control and tariff treatment.

Material and Construction Consistency: Both parts utilize identical materials and finishes: Zinc Alloy body with Tin finish, Copper Alloy center contact with Gold plating, and Thermoplastic dielectric. This ensures equivalent electrical performance, corrosion resistance, and contact reliability.

Packaging Consideration: The HSDNARPPCB18A is supplied in Cut Tape (CT) packaging, which is standard for automated assembly processes. The main part packaging specification was not provided; however, Cut Tape packaging is compatible with standard component handling and placement equipment.

Frequently Asked Questions (FAQ)

Q: Can the HSDNARPPCB18A be used as a direct replacement for the HSDNARPPCB19B in existing designs?

A: Yes. The HSDNARPPCB18A is mechanically and electrically compatible with the HSDNARPPCB19B. Both components share identical connector style (HSD® Fakra Quadraxial), connector type (Plug Male Pin), termination methods (Solder), mounting configuration (Through Hole Right Angle), and Code A designation. No design modifications are required for substitution.

Q: What is the difference between the impedance specifications of these two parts?

A: The HSDNARPPCB19B specifies 100 Ohms impedance. The HSDNARPPCB18A does not provide an impedance specification in the available documentation. For applications requiring confirmed 100 Ohms impedance, the impedance specification of the substitute part should be verified against the connector datasheet or manufacturer technical documentation.

Q: Are there any differences in operating temperature or mating cycle ratings?

A: The HSDNARPPCB19B specifies an operating temperature range of -40°C to 105°C and 25 mating cycles. The HSDNARPPCB18A does not provide operating temperature or mating cycle specifications in the available documentation. For applications with specific thermal or cycling requirements, these parameters should be confirmed with the manufacturer.

Q: What is the difference in Moisture Sensitivity Level (MSL) between these parts?

A: The HSDNARPPCB19B carries MSL 1 (Unlimited), indicating no moisture sensitivity restrictions. The HSDNARPPCB18A carries MSL 2A (4 Weeks), indicating that the component must be used within 4 weeks of package opening under controlled humidity conditions. For applications requiring unlimited shelf life without moisture control, this difference should be considered in supply chain planning.

Q: Are both parts RoHS compliant?

A: Yes. The HSDNARPPCB19B is RoHS Compliant. The HSDNARPPCB18A is ROHS3 Compliant, which represents the current version of the RoHS directive and supersedes earlier RoHS compliance levels. Both parts meet current environmental regulations for restricted substances.

Q: What packaging format is the HSDNARPPCB18A supplied in?

A: The HSDNARPPCB18A is supplied in Cut Tape (CT) packaging, which is standard for automated component placement and assembly processes. This packaging format is compatible with standard pick-and-place equipment used in PCB manufacturing.

Q: Are the export control classifications identical for both parts?

A: Yes. Both the HSDNARPPCB19B and HSDNARPPCB18A carry identical ECCN (EAR99) and HTSUS (8536.69.4010) classifications, ensuring consistent export control and tariff treatment.