HS5E-D4405-G Equivalent & Substitute Parts

Part Overview

The HS5E-D4405-G is an interlock solenoid release switch manufactured by IDEC, classified as a DPST-NC (Double Pole Single Throw - Normally Closed) configuration with dual circuits. This component is designed for panel disconnect applications requiring a 24VDC supply voltage with a holding force of 102kgf. The part is currently obsolete, making identification of functionally equivalent alternatives essential for system maintenance, repair, and component sourcing.

Substiute Parts

HS5E-D4405-G

IDECIn Stock: 1032HS5E-D4405-G Datasheet

Current PartRFQ

HS5L-VD44M-G

IDECIn Stock: 1196HS5L-VD44M-G Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the HS5E-D4405-G is determined by strict equivalence across the following critical parameters:

• Circuit Configuration: DPST-NC x 2 (dual normally closed circuits)
• Current Rating: 2.5A (AC/DC)
• Voltage Rating: 125VAC, 30VDC minimum
• Supply Voltage: 24VDC
• Actuator Type: Panel Disconnect
• Ingress Protection: IP67 minimum
• Environmental Compliance: RoHS3 Compliant

The substitute part HS5L-VD44M-G meets all mandatory electrical and mechanical parameters. Differences in holding force (143kgf vs. 102kgf), operating temperature range (-25°C ~ 55°C vs. -25°C ~ 50°C), termination style (Spring Terminal vs. Cable Leads), and conduit thread size (M20 vs. not specified) represent enhancements or design variations that do not prevent functional substitution in applications designed for the original part.

Parameter Comparison

Engineering Selection Recommendations

The HS5L-VD44M-G is the designated substitute for the obsolete HS5E-D4405-G based on functional equivalence across all critical electrical and mechanical parameters. Both components maintain identical circuit configuration, current and voltage ratings, supply voltage, and ingress protection classification.

The HS5L-VD44M-G carries active product status with expanded regulatory approvals (CCC, CE, TUV, UL) compared to the original part (CE, cURus, TUV), providing enhanced compliance coverage for global applications. Both parts maintain ROHS3 compliance and are suitable for equivalent system integration.

The increased holding force (143kgf) and extended operating temperature range (-25°C ~ 55°C) of the substitute represent design improvements that do not compromise backward compatibility. The termination style difference (Spring Terminal vs. Cable Leads) and the addition of a conduit thread size specification (M20) require mechanical integration assessment during installation but do not affect electrical substitution validity.

Frequently Asked Questions (FAQ)

Q: Can the HS5L-VD44M-G directly replace the HS5E-D4405-G in existing installations?

A: Yes, from an electrical standpoint. Both components share identical circuit configuration (DPST-NC x 2), current rating (2.5A AC/DC), voltage rating (125VAC, 30VDC), and supply voltage (24VDC). Mechanical integration must be assessed due to termination style differences (Spring Terminal vs. Cable Leads) and the addition of M20 conduit thread specification on the substitute.

Q: What are the key parameters that determine substitution eligibility?

A: Substitution is valid when the following parameters match or exceed the original specification: circuit configuration (DPST-NC x 2), current rating (2.5A AC/DC), voltage rating (125VAC, 30VDC minimum), supply voltage (24VDC), actuator type (Panel Disconnect), and ingress protection (IP67 minimum). The HS5L-VD44M-G meets all these criteria.

Q: Does the higher holding force of the HS5L-VD44M-G (143kgf vs. 102kgf) affect compatibility?

A: No. The increased holding force represents an enhancement that does not prevent functional substitution. Applications designed for 102kgf holding force will operate within specification with the higher-force substitute.

Q: Are there packaging differences between these parts?

A: Yes. The HS5E-D4405-G uses Cable Leads termination, while the HS5L-VD44M-G uses Spring Terminal termination. The substitute also specifies M20 conduit thread size. These mechanical differences require assessment during installation planning but do not affect electrical compatibility.

Q: What is the regulatory compliance status of the substitute?

A: The HS5L-VD44M-G maintains ROHS3 compliance and carries approvals from CCC, CE, TUV, and UL. The original part carried CE, cURus, and TUV approvals. The substitute provides expanded regulatory coverage suitable for broader market applications.