HS5E-C7Y403-G Interlock Solenoid Locking Switch - Equivalent & Substitute Parts

Part Overview

The HS5E-C7Y403-G is an interlock solenoid locking switch manufactured by IDEC, classified as a DPST (Double Pole Single Throw) switch with dual circuit configuration (DPST-NO/NC + DPST-NC). This component is designed for panel disconnect applications requiring a 24VDC supply voltage with a holding force of 102kgf and operates across a temperature range of -25°C to 50°C. The part carries obsolete product status, making identification of functionally equivalent alternatives necessary for ongoing maintenance and system support.

Substiute Parts

HS5E-C7Y403-G

IDECIn Stock: 882HS5E-C7Y403-G Datasheet

Current PartRFQ

HS5L-VC7Y4M-G

IDECIn Stock: 835HS5L-VC7Y4M-G Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the HS5E-C7Y403-G is determined by strict equivalence across the following critical parameters:

• Circuit configuration (DPST-NO/NC + DPST-NC)
• Current rating (2.5A AC/DC)
• Voltage rating (125VAC, 30VDC)
• Supply voltage (24VDC)
• Actuator type (Panel Disconnect)
• Ingress protection rating (IP67)
• Operating temperature range compatibility
• RoHS compliance status

The HS5L-VC7Y4M-G qualifies as a substitute based on matching all mandatory electrical and mechanical parameters. Differences in holding force (143kgf vs. 102kgf), termination style (Spring Terminal vs. Cable Leads), and operating temperature upper limit (55°C vs. 50°C) represent enhancements or variations that do not preclude substitution in applications designed for the original part.

Parameter Comparison

Engineering Selection Recommendations

The HS5L-VC7Y4M-G is the designated substitute for the obsolete HS5E-C7Y403-G based on functional equivalence across all critical electrical and mechanical parameters. The substitute part maintains active product status with IDEC, ensuring ongoing availability and support.

Both parts satisfy identical circuit requirements (DPST-NO/NC + DPST-NC), current handling (2.5A AC/DC), voltage specifications (125VAC, 30VDC with 24VDC supply), and environmental protection (IP67). Regulatory compliance is maintained through ROHS3 certification on both parts.

The HS5L-VC7Y4M-G provides enhanced holding force (143kgf vs. 102kgf) and extended operating temperature range (-25°C to 55°C vs. -25°C to 50°C), representing performance improvements over the original specification. The termination style differs (Spring Terminal vs. Cable Leads), requiring verification of mechanical integration within the target application.

Frequently Asked Questions (FAQ)

Q: Can the HS5L-VC7Y4M-G directly replace the HS5E-C7Y403-G in existing installations?

A: The HS5L-VC7Y4M-G matches all critical electrical parameters (circuit configuration, current rating, voltage rating, and supply voltage) required for functional substitution. Mechanical integration must be verified due to differences in termination style (Spring Terminal vs. Cable Leads) and potential dimensional variations between series.

Q: What are the key differences between these two parts?

A: The primary differences are: (1) Termination style—HS5E uses Cable Leads while HS5L uses Spring Terminal; (2) Holding force—HS5L provides 143kgf versus 102kgf on HS5E; (3) Operating temperature upper limit—HS5L extends to 55°C versus 50°C on HS5E; (4) Product status—HS5E is obsolete while HS5L is active.

Q: Are there any compliance or certification differences?

A: Both parts are ROHS3 compliant. The HS5E-C7Y403-G carries CE, cURus, and TUV certifications. The HS5L-VC7Y4M-G carries CCC, CE, TUV, and UL certifications, providing broader regulatory coverage.

Q: Does the higher holding force of the HS5L-VC7Y4M-G affect compatibility?

A: The increased holding force (143kgf vs. 102kgf) represents a performance enhancement and does not create incompatibility. Applications designed for 102kgf holding force will operate within the HS5L specification.

Q: What packaging considerations apply to the HS5L-VC7Y4M-G?

A: The HS5L-VC7Y4M-G is supplied in Bulk packaging, whereas the HS5E-C7Y403-G packaging specification is not provided. Verify packaging requirements for your procurement process.