HS5E-C4001 Equivalent & Substitute Parts

Part Overview

The HS5E-C4001 is an interlock solenoid release switch manufactured by IDEC, designed for panel disconnect applications with DPST circuit configuration. This component operates at 24VDC supply voltage with a 2.5A current rating across both AC and DC loads, and provides a holding force of 102kgf. The part is classified as obsolete, making identification of functionally equivalent alternatives necessary for ongoing system maintenance and new design implementations where this legacy component is specified.

Substiute Parts

HS5E-C4001

IDECIn Stock: 938HS5E-C4001 Datasheet

Current PartRFQ

HS5L-VC44M-G

IDECIn Stock: 834HS5L-VC44M-G Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the HS5E-C4001 is determined by strict equivalence across the following critical parameters:

• Circuit configuration (DPST-NO/NC + DPST-NC)
• Current rating (2.5A AC/DC)
• Voltage rating (125VAC, 30VDC minimum)
• Supply voltage (24VDC)
• Actuator type (Panel Disconnect)
• Ingress protection (IP67 minimum)
• Operating temperature range compatibility (-25°C ~ 50°C minimum)
• RoHS3 compliance

The HS5L-VC44M-G meets all these criteria. While it offers enhanced holding force (143kgf versus 102kgf) and extended temperature range (-25°C ~ 55°C), these represent improvements that maintain backward compatibility. The primary difference is termination style (Spring Terminal versus Cable Leads) and conduit thread size specification (M20 versus unspecified), which must be evaluated for mechanical integration into the target application.

Parameter Comparison

Engineering Selection Recommendations

The HS5L-VC44M-G is the designated substitute for the obsolete HS5E-C4001. Selection of this alternative is supported by:

• Identical electrical specifications (circuit, current, voltage ratings)
• Equivalent mechanical function (panel disconnect solenoid release)
• Active product status ensuring ongoing availability and supply chain continuity
• Enhanced compliance certifications (CCC, CE, TUV, UL versus CE, cURus, TUV)
• ROHS3 compliance maintained across both parts
• Improved holding force and extended operating temperature range provide performance margin

The primary integration consideration is termination style transition from cable leads to spring terminals, which requires mechanical interface verification. Conduit thread size specification (M20) on the substitute must be confirmed compatible with the target installation environment.

Frequently Asked Questions (FAQ)

Q: Can HS5L-VC44M-G directly replace HS5E-C4001 in existing installations?

A: Electrical and functional compatibility is confirmed. Mechanical compatibility depends on termination method (spring terminal versus cable lead) and conduit thread size (M20) integration with the existing panel or enclosure. Physical fit verification is required before installation.

Q: What is the significance of the higher holding force (143kgf vs 102kgf)?

A: The substitute provides 40% greater holding force, which represents a performance improvement. This does not prevent substitution; it ensures the replacement maintains or exceeds the original mechanical performance specification.

Q: Are there compliance differences between these parts?

A: The HS5L-VC44M-G carries additional certifications (CCC, UL) beyond the original part's certifications (cURus). Both maintain CE, TUV, and ROHS3 compliance. The expanded certification profile supports broader market applications.

Q: Why is termination style different?

A: The HS5E series uses cable leads; the HS5L series uses spring terminals. This reflects design evolution within IDEC's solenoid release product line. Integration requires appropriate wiring harness or connector adaptation.

Q: Is the extended temperature range (-25°C ~ 55°C vs -25°C ~ 50°C) significant?

A: The substitute supports 5°C additional upper temperature operation. This provides operational margin in high-temperature environments but does not restrict use in applications within the original temperature specification.

Q: What is the impact of M20 conduit thread size on the substitute?

A: The HS5L-VC44M-G specifies M20 conduit thread, whereas the original part does not specify this parameter. Verify that M20 threading is compatible with the target installation conduit or enclosure entry point.