HS5E-B7Y005 Equivalent & Substitute Parts

Part Overview

The HS5E-B7Y005 is an interlock solenoid locking switch manufactured by IDEC, classified as a DPST (Double Pole Single Throw) configuration with combined NO/NC and NC circuits. This component operates at 24VDC supply voltage with a 2.5A current rating across both AC and DC applications, delivering a holding force of 102kgf. The unit features panel disconnect actuator type with cable lead termination and IP67 ingress protection rating.

The HS5E-B7Y005 is currently listed as obsolete. Identifying equivalent substitute parts is necessary to maintain system functionality, ensure design continuity, and support ongoing maintenance and replacement requirements for installed equipment.

Substiute Parts

HS5E-B7Y005

IDECIn Stock: 1017HS5E-B7Y005 Datasheet

Current PartRFQ

HS5L-VB7Y4M-G

IDECIn Stock: 1150HS5L-VB7Y4M-G Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

The HS5L-VB7Y4M-G qualifies as a functional equivalent to the HS5E-B7Y005 based on the following critical parameters that determine substitution compatibility:

Matching Parameters:

• Manufacturer: IDEC (same manufacturer ensures design consistency and support continuity)
• Type: Solenoid Locking (identical functional classification)
• Circuit Configuration: DPST-NO/NC + DPST-NC (identical electrical circuit topology)
• Current Rating: 2.5A (AC/DC) (identical current handling capacity)
• Voltage Rating: 125VAC, 30VDC (identical voltage specifications)
• Supply Voltage: 24VDC (identical control voltage)
• Actuator Type: Panel Disconnect (identical mechanical interface)
• Ingress Protection: IP67 - Dust Tight, Waterproof (identical environmental protection)
• RoHS Status: ROHS3 Compliant (equivalent regulatory compliance)

Differences Noted:

• Holding Force: HS5L-VB7Y4M-G provides 143kgf versus 102kgf in the original (higher performance capability)
• Termination Style: Spring Terminal versus Cable Leads (different connection method)
• Operating Temperature Range: -25°C to 55°C versus -25°C to 50°C (extended upper limit)
• Conduit Thread Size: M20 (additional mechanical specification in substitute)
• Product Status: Active (substitute is in current production)
• Approval Agencies: CCC, CE, TUV, UL (expanded certification scope)

Parameter Comparison

Engineering Selection Recommendations

The HS5L-VB7Y4M-G is the designated substitute for the obsolete HS5E-B7Y005. Selection of this substitute is supported by the following engineering factors:

Regulatory Compliance: Both components maintain ROHS3 compliance. The HS5L-VB7Y4M-G carries expanded approval certifications (CCC, CE, TUV, UL) compared to the original part (CE, cURus, TUV), providing broader regulatory acceptance across international markets.

Product Availability: The HS5E-B7Y005 is obsolete with no ongoing production. The HS5L-VB7Y4M-G is in active production status with confirmed inventory availability, ensuring reliable procurement for new designs and replacement applications.

Electrical Equivalence: Identical current rating (2.5A AC/DC), voltage rating (125VAC, 30VDC), and supply voltage (24VDC) ensure direct functional compatibility in existing circuit designs without modification.

Mechanical Compatibility: Both components feature identical panel disconnect actuator type and IP67 ingress protection, maintaining environmental sealing and mechanical interface requirements.

Performance Enhancement: The HS5L-VB7Y4M-G provides increased holding force (143kgf versus 102kgf), representing a performance improvement over the original specification.

Termination Consideration: The substitute uses spring terminal termination instead of cable leads. Integration into existing installations requires assessment of connection methodology and potential wiring modifications.

Frequently Asked Questions (FAQ)

Q: Can the HS5L-VB7Y4M-G directly replace the HS5E-B7Y005 in existing installations?

A: Electrical and functional compatibility is confirmed across all critical parameters: circuit configuration, current rating, voltage specifications, and supply voltage are identical. Mechanical interface (panel disconnect actuator) and environmental protection (IP67) are equivalent. The primary consideration is termination style: the substitute uses spring terminals versus cable leads in the original. Installation feasibility depends on existing wiring infrastructure and connector compatibility.

Q: What is the significance of the increased holding force in the HS5L-VB7Y4M-G?

A: The substitute provides 143kgf holding force compared to 102kgf in the original. This represents a 40% increase in clamping force. For applications where the original 102kgf specification was adequate, the higher force provides additional safety margin. For applications requiring exactly 102kgf, the increased force does not create incompatibility but represents enhanced performance capability.

Q: Are there any temperature operating range differences?

A: The HS5L-VB7Y4M-G extends the upper operating temperature limit to 55°C compared to 50°C in the original. The lower limit remains -25°C for both components. This extended range provides broader environmental compatibility without restricting applications within the original temperature specification.

Q: What certifications does the substitute carry?

A: The HS5L-VB7Y4M-G holds CCC, CE, TUV, and UL approvals. The original HS5E-B7Y005 carried CE, cURus, and TUV approvals. The substitute's expanded certification scope supports broader international regulatory acceptance.

Q: How does the spring terminal termination differ from cable leads?

A: Cable leads provide pre-attached wiring for direct connection. Spring terminals require insertion of individual conductors into terminal blocks. Spring terminal design typically offers greater flexibility in conductor gauge selection and installation methodology but requires different connection procedures than cable lead systems.

Q: Is the HS5L-VB7Y4M-G available in the same packaging as the original?

A: The HS5L-VB7Y4M-G is supplied in bulk packaging. Original packaging information for the HS5E-B7Y005 was not specified in the technical data. Packaging format should be confirmed with the supplier based on specific procurement requirements.