HS1KL RVG Equivalent & Substitute Parts

Part Overview

The HS1KL RVG is a general-purpose rectifier diode manufactured by Taiwan Semiconductor Corporation, rated for 800 V DC reverse voltage and 1 A average rectified current in a Sub SMA surface mount package. This component is classified as Active product status and complies with ROHS3 and REACH standards. Substitute parts are identified when equivalent electrical performance and mechanical compatibility are required for design flexibility, supply chain alternatives, or specific packaging preferences while maintaining the same functional specifications.

Substiute Parts

HS1KL RVG

Taiwan Semiconductor CorporationIn Stock: 941HS1KL RVG Datasheet

Current PartRFQ

RS07K-GS08

Vishay General Semiconductor - Diodes DivisionIn Stock: 50355RS07K-GS08 Datasheet

SimilarRFQ

RS07K-GS18

Vishay General Semiconductor - Diodes DivisionIn Stock: 50878RS07K-GS18 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the HS1KL RVG are identified based on the following critical electrical and mechanical parameters:

Matching Criteria:

• Voltage - DC Reverse (Vr) (Max): 800 V
• Package / Case: DO-219AB
• Mounting Type: Surface Mount
• Speed Classification: Fast Recovery ≤ 500ns, > 200mA (Io)
• Operating Temperature Range: -55°C to 150°C
• RoHS Status: ROHS3 Compliant

Substitution Logic: The identified substitute parts (RS07K-GS08 and RS07K-GS18) share identical reverse voltage ratings, package specifications, and thermal operating ranges. Both parts maintain fast recovery characteristics and comply with the same environmental standards. Current rating differences and forward voltage variations are within acceptable tolerance for general-purpose rectifier applications where the primary circuit requirement is 800 V reverse voltage blocking capability. Packaging format differences (Tape & Reel versus Cut Tape & Digi-Reel) do not affect electrical performance and represent supply chain alternatives.

Parameter Comparison

Engineering Selection Recommendations

HS1KL RVG Selection: Select the HS1KL RVG when the primary requirement is a 1 A rated general-purpose rectifier diode with 800 V reverse voltage capability in standard technology classification. This part is suitable for applications requiring the specified current rating and is compliant with ROHS3 and REACH standards.

RS07K-GS18 Selection: The RS07K-GS18 is functionally equivalent for 800 V reverse voltage applications and offers identical thermal operating range and package specifications. This part is supplied in Tape & Reel format matching the HS1KL RVG packaging preference. The RS07K-GS18 carries Automotive grade classification and AEC-Q101 qualification, making it suitable for applications requiring automotive-level reliability. The 500 mA current rating is appropriate for circuits where the full 1 A capacity of the HS1KL RVG is not required.

RS07K-GS08 Selection: The RS07K-GS08 provides equivalent 800 V reverse voltage performance and is available in Cut Tape and Digi-Reel packaging formats. This part is identical in electrical specifications to the RS07K-GS18 but differs in packaging format. The RS07K-GS08 is suitable for applications where alternative packaging formats are acceptable and offers the same Automotive grade and AEC-Q101 qualification.

Compliance Basis: All three parts maintain ROHS3 compliance, REACH unaffected status, and MSL 1 (Unlimited) moisture sensitivity classification. Selection between these parts is based on current rating requirements, packaging format availability, and automotive qualification needs rather than environmental compliance considerations.

Frequently Asked Questions (FAQ)

Q: Can RS07K-GS08 or RS07K-GS18 directly replace HS1KL RVG in all applications?

A: Direct replacement is valid for applications where the circuit current requirement does not exceed 500 mA. The substitute parts are rated for 500 mA average rectified current compared to the HS1KL RVG's 1 A rating. Both substitute parts maintain identical 800 V reverse voltage blocking capability, fast recovery characteristics, and thermal operating range. For circuits requiring the full 1 A capacity, the HS1KL RVG is the appropriate selection.

Q: What is the difference between RS07K-GS08 and RS07K-GS18?

A: Both parts are electrically identical with 800 V reverse voltage, 500 mA current rating, and identical fast recovery specifications. The primary difference is packaging format: RS07K-GS08 is supplied in Cut Tape and Digi-Reel format, while RS07K-GS18 is supplied in Tape & Reel format. Selection between these two parts depends on packaging format requirements and supply chain preferences.

Q: Are the substitute parts suitable for automotive applications?

A: Yes. Both RS07K-GS08 and RS07K-GS18 carry Automotive grade classification and AEC-Q101 qualification. The HS1KL RVG is classified as Standard technology without automotive qualification. If automotive-grade reliability is required, the Vishay substitute parts are appropriate selections.

Q: What is the significance of the reverse recovery time difference between HS1KL RVG and the substitute parts?

A: The HS1KL RVG has a reverse recovery time of 75 ns, while both substitute parts have 300 ns. Both values fall within the Fast Recovery classification (≤ 500 ns for > 200 mA). The faster recovery time of the HS1KL RVG may provide lower switching losses in high-frequency applications, but both parts are classified as fast recovery diodes suitable for general-purpose rectification.

Q: Do all three parts use the same package?

A: Yes. All three parts use the DO-219AB package in surface mount configuration. This ensures mechanical and thermal compatibility on printed circuit boards. Packaging format differences (Tape & Reel versus Cut Tape & Digi-Reel) relate to supply and handling methods, not the physical component package itself.

Q: Are there any compliance or environmental differences between these parts?

A: No. All three parts are ROHS3 compliant, REACH unaffected, and carry MSL 1 (Unlimited) moisture sensitivity classification. Environmental and regulatory compliance is equivalent across all three parts.