HS1JL RHG Equivalent & Substitute Parts

Part Overview

The HS1JL RHG is a general-purpose rectifier diode rated for 600 V DC reverse voltage and 1 A average rectified current in a Sub SMA surface mount package. Manufactured by Taiwan Semiconductor Corporation, this component is classified as Active product status and is ROHS3 compliant. Substitute parts are identified based on matching electrical ratings, package compatibility, and thermal operating ranges. Alternative components may be required due to inventory availability, supply chain considerations, or specific application requirements within the defined electrical parameters.

Key Parameters

Parameter	Value	Unit
Voltage - DC Reverse (Vr) (Max)	600	V
Current - Average Rectified (Io)	1	A
Voltage - Forward (Vf) (Max) @ If	1.7 @ 1 A	V
Reverse Recovery Time (trr)	75	ns
Current - Reverse Leakage @ Vr	5	µA @ 600 V
Package / Case	DO-219AB	Sub SMA
Operating Temperature - Junction	-55 to 150	°C
RoHS Status	ROHS3 Compliant

Substitute Part Grouping Explanation

Substitute parts for the HS1JL RHG are classified into two categories based on electrical parameter alignment and product status:

Parametric Equivalents maintain identical or superior electrical specifications within the defined operating envelope:

Voltage rating: 600 V DC reverse (Vr)
Current rating: 1 A average rectified (Io)
Package: DO-219AB Sub SMA surface mount
Operating temperature range: -55°C to 150°C minimum
RoHS3 compliance and MSL 1 rating

Similar Parts share the same package and voltage rating but differ in current capacity or thermal specifications:

Voltage rating: 600 V DC reverse (Vr)
Package: DO-219AB surface mount
Extended operating temperature ranges available
Automotive-grade qualification with AEC-Q101 certification

The critical parameters determining substitution eligibility are: reverse voltage rating, average rectified current capacity, package type, and compliance certifications.

Parameter Comparison

Parameter	HS1JL RHG	ES1JL	HS1JL RVG	VS-1EFU06HM3/I	VS-2EFU06HM3/I
Manufacturer	Taiwan Semiconductor	Taiwan Semiconductor	Taiwan Semiconductor	Vishay General Semiconductor	Vishay General Semiconductor
Voltage - DC Reverse (Vr) (Max)	600 V	600 V	600 V	600 V	600 V
Current - Average Rectified (Io)	1 A	1 A	1 A	1 A	2 A
Voltage - Forward (Vf) (Max) @ If	1.7 V @ 1 A	1.7 V @ 1 A	1.7 V @ 1 A	1.2 V @ 1 A	1.35 V @ 2 A
Reverse Recovery Time (trr)	75 ns	35 ns	75 ns	32 ns	55 ns
Current - Reverse Leakage @ Vr	5 µA @ 600 V	5 µA @ 600 V	5 µA @ 600 V	3 µA @ 600 V	3 µA @ 600 V
Package / Case	DO-219AB	DO-219AB	DO-219AB	DO-219AB	DO-219AB
Operating Temperature - Junction	-55 to 150°C	-55 to 150°C	-55 to 150°C	-55 to 175°C	-55 to 175°C
Product Status	Active	Not For New Designs	Active	Active	Active
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant

Engineering Selection Recommendations

HS1JL RVG is the primary direct substitute for HS1JL RHG. Both components are manufactured by Taiwan Semiconductor Corporation with Active product status. Electrical specifications are identical, including 600 V reverse voltage, 1 A average rectified current, 1.7 V forward voltage at 1 A, and 75 ns reverse recovery time. The HS1JL RVG is supplied in Cut Tape (CT) packaging with 1030 pieces in stock inventory. This part maintains full compatibility with the original HS1JL RHG specification.

ES1JL is a parametric equivalent manufactured by Taiwan Semiconductor Corporation. It meets all electrical requirements for 600 V and 1 A operation with identical forward voltage and operating temperature range. However, ES1JL carries Not For New Designs product status, indicating it is in mature phase. The reverse recovery time is improved at 35 ns compared to 75 ns for the HS1JL RHG. ES1JL is available in Cut Tape and Digi-Reel packaging with 84500 pieces in stock.

VS-1EFU06HM3/I is a similar part manufactured by Vishay General Semiconductor - Diodes Division. This component shares the 600 V reverse voltage rating and 1 A current capacity with identical package type (DO-219AB). The VS-1EFU06HM3/I features improved electrical characteristics including 1.2 V forward voltage and 32 ns reverse recovery time. This part is qualified to AEC-Q101 automotive standard with extended operating temperature range to 175°C. Product status is Active.

VS-2EFU06HM3/I is a similar part with increased current rating of 2 A, suitable for applications requiring higher current capacity within the same 600 V voltage class. This Vishay component also features automotive-grade qualification and extended temperature range to 175°C. Forward voltage is specified at 1.35 V for 2 A operation.

Selection between these alternatives depends on application requirements: use HS1JL RVG for direct replacement with identical specifications; consider ES1JL only if mature-phase components are acceptable; select Vishay parts for automotive applications or extended temperature operation.

Frequently Asked Questions (FAQ)

Q: Can ES1JL be used as a direct replacement for HS1JL RHG?

A: ES1JL meets all electrical specifications for 600 V reverse voltage and 1 A average rectified current with identical forward voltage and operating temperature range. However, ES1JL carries Not For New Designs product status. For new designs, HS1JL RVG is the recommended substitute. ES1JL is suitable for legacy system maintenance where mature-phase components are acceptable.

Q: What is the difference between HS1JL RHG and HS1JL RVG?

A: Both parts are manufactured by Taiwan Semiconductor Corporation with identical electrical specifications: 600 V reverse voltage, 1 A current, 1.7 V forward voltage, and 75 ns reverse recovery time. The primary difference is packaging: HS1JL RHG is supplied in standard packaging while HS1JL RVG is supplied in Cut Tape (CT) format. Both maintain Active product status and full ROHS3 compliance.

Q: Can Vishay VS-1EFU06HM3/I replace the Taiwan Semiconductor HS1JL RHG?

A: VS-1EFU06HM3/I is electrically compatible with HS1JL RHG for the 600 V and 1 A rating. Both use DO-219AB Sub SMA packaging. The Vishay part offers improved performance characteristics including lower forward voltage (1.2 V versus 1.7 V) and faster reverse recovery time (32 ns versus 75 ns). VS-1EFU06HM3/I includes automotive-grade qualification and extended temperature range to 175°C, making it suitable for demanding applications.

Q: Why would I select VS-2EFU06HM3/I over the 1 A rated parts?

A: VS-2EFU06HM3/I is selected when application current requirements exceed 1 A but remain within the 600 V voltage class. This 2 A rated part maintains the same DO-219AB package and 600 V reverse voltage rating. It is qualified to AEC-Q101 automotive standard with extended operating temperature to 175°C. Use this part only if your circuit design requires the higher current capacity.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. All listed substitute parts—ES1JL, HS1JL RVG, VS-1EFU06HM3/I, and VS-2EFU06HM3/I—are ROHS3 compliant with Moisture Sensitivity Level 1 (Unlimited). All parts are REACH Unaffected and classified under ECCN EAR99.

Q: What is the package compatibility between these parts?

A: All substitute parts use DO-219AB Sub SMA surface mount package, ensuring mechanical and electrical compatibility with HS1JL RHG. Packaging format differs (standard, Cut Tape, or Tape & Reel) but the physical package remains identical, allowing direct board-level substitution.

Q: Can I use these parts interchangeably in my circuit?

A: Electrical interchangeability is confirmed for parts with matching voltage and current ratings. HS1JL RVG and ES1JL are direct electrical equivalents to HS1JL RHG at 600 V and 1 A. VS-1EFU06HM3/I is compatible at 1 A operation. VS-2EFU06HM3/I is suitable only if your circuit can accommodate the 2 A rating. Verify your specific application requirements before substitution.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message