HS10 22R J Wirewound Chassis Mount Resistor - Equivalent & Substitute Parts

Part Overview

The HS10 22R J is a 22 Ohms ±5% 10W wirewound chassis mount resistor manufactured by Ohmite in the ARCOL HS series. This component is designed for applications requiring reliable power dissipation with stable resistance values in industrial and electronic equipment. The part maintains active product status with 661 units in current inventory. Substitute parts are identified when equivalent electrical and mechanical specifications are required for design flexibility, supply chain alternatives, or inventory management.

Substiute Parts

HS10 22R J

OhmiteIn Stock: 746HS10 22R J Datasheet

Current PartRFQ

HS10 22R J

ARCOLIn Stock: 932HS10 22R J Datasheet

Parametric EquivalentRFQ

HS10 22R J

ARCOLIn Stock: 932HS10 22R J Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the HS10 22R J are identified based on strict equivalence across the following critical parameters:

• Resistance value: 22 Ohms
• Tolerance: ±5%
• Power rating: 10W
• Composition: Wirewound
• Temperature coefficient: ±100ppm/°C
• Housing material: Aluminum
• Mounting configuration: Flanges with solder lugs
• Package classification: Axial, Box

The ARCOL HS10 22R J variant listed as a substitute maintains identical electrical specifications and mechanical mounting characteristics. Dimensional variations in width (0.650" vs 0.335") do not affect functional equivalence when mounting space permits the larger footprint. Both parts are manufactured by ARCOL and share the same series designation, ensuring design compatibility for applications where the HS10 22R J is specified.

Parameter Comparison

Engineering Selection Recommendations

Both the Ohmite HS10 22R J and ARCOL HS10 22R J maintain active product status with established supply availability. The Ohmite variant carries ROHS3 Compliant certification, while the ARCOL variant is RoHS Compliant. Selection between these parts should be based on:

• Supply chain requirements and inventory availability (Ohmite: 661 units; ARCOL: 836 units)
• Compliance certification alignment with end-product requirements
• PCB layout constraints relative to dimensional specifications, particularly the width difference (0.335" vs 0.650")
• Established supplier relationships and procurement lead times

Both parts satisfy identical electrical performance requirements for 22 Ohm 10W wirewound applications with ±5% tolerance and ±100ppm/°C temperature stability.

Frequently Asked Questions (FAQ)

Q: Can the ARCOL HS10 22R J replace the Ohmite HS10 22R J in existing designs?

A: Yes, when PCB layout accommodates the width dimension of 0.650" (16.50mm). All electrical parameters, power rating, tolerance, and mounting characteristics are equivalent.

Q: What is the significance of the width dimension difference?

A: The Ohmite variant measures 0.335" (8.50mm) in width, while the ARCOL variant measures 0.650" (16.50mm). This affects PCB footprint spacing but does not impact electrical performance or functional compatibility.

Q: Are both parts RoHS compliant?

A: The Ohmite HS10 22R J is ROHS3 Compliant. The ARCOL HS10 22R J is RoHS Compliant. Both meet environmental compliance standards; specific certification requirements should be verified against end-product specifications.

Q: What mounting configuration do these parts use?

A: Both parts feature aluminum housing with flanged mounting and solder lug leads, enabling direct PCB mounting or chassis integration with mechanical fastening.

Q: Are there differences in temperature performance between the two variants?

A: No. Both parts maintain identical temperature coefficient specifications of ±100ppm/°C, ensuring equivalent thermal stability across operating ranges.