HR30-7R-10PC(71) Equivalent & Substitute Parts

Part Overview

The HR30-7R-10PC(71) is a 10-position circular connector receptacle housing for male pins, manufactured by Hirose Electric Co Ltd. This panel-mount component features a push-pull fastening mechanism, keyed orientation, and IP67/IP68 ingress protection rating. The part is classified as obsolete, making identification of active equivalent models essential for ongoing procurement and system maintenance.

Substiute Parts

HR30-7R-10PC(71)

Hirose Electric Co LtdIn Stock: 766HR30-7R-10PC(71) Datasheet

Current PartRFQ

HR30-7R-10PC(31)

Hirose Electric Co LtdIn Stock: 500415HR30-7R-10PC(31) Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

The HR30-7R-10PC(31) qualifies as a direct substitute based on the following matching parameters:

• Series: HR30 (identical base product family)
• Number of Positions: 10 (identical connector configuration)
• Shell Size - Insert: 7 (identical mechanical interface)
• Connector Type: Receptacle Housing for Male Pins (identical functional role)
• Mounting Type: Panel Mount with Bulkhead - Rear Side Nut (identical installation method)
• Fastening Type: Push-Pull with Keyed Orientation (identical engagement mechanism)
• Shell Material: Polyphenylene Sulfide (PPS) (identical material composition)
• Housing Color: Black (identical physical appearance)
• Ingress Protection: IP67/IP68 (identical environmental sealing)
• Contact Type: Crimp with Square Contact Shape (identical electrical interface)
• Shielding: Unshielded (identical EMI characteristics)
• Operating Temperature: -25°C ~ 85°C (identical thermal range)
• Material Flammability Rating: UL94 V-0 (identical safety certification)

The primary distinction is product status: HR30-7R-10PC(71) is obsolete, while HR30-7R-10PC(31) is active with significantly higher inventory availability.

Parameter Comparison

Engineering Selection Recommendations

The HR30-7R-10PC(31) is the appropriate selection for new designs and ongoing procurement. This part maintains identical electrical, mechanical, and environmental specifications as the obsolete HR30-7R-10PC(71), ensuring direct functional compatibility. The active product status of HR30-7R-10PC(31) provides supply chain continuity and significantly higher inventory availability (500,400 units versus 658 units). The HR30-7R-10PC(31) carries ROHS3 compliance and REACH affected status documentation, meeting current regulatory requirements for electronic component procurement.

Frequently Asked Questions (FAQ)

Q: Are HR30-7R-10PC(71) and HR30-7R-10PC(31) mechanically interchangeable?

A: Yes. Both parts share identical shell size (7), mounting configuration (panel mount with bulkhead rear side nut), and keyed orientation. Physical installation and mating with corresponding plug connectors are identical.

Q: Can HR30-7R-10PC(31) replace HR30-7R-10PC(71) in existing assemblies?

A: Yes. The electrical interface (10-position crimp contacts with square shape), environmental sealing (IP67/IP68), and operating temperature range (-25°C ~ 85°C) are identical. No circuit redesign or assembly modification is required.

Q: What is the difference between the packaging designations (71) and (31)?

A: The designations indicate different packaging and product lifecycle states. HR30-7R-10PC(71) is obsolete with limited stock (658 units). HR30-7R-10PC(31) is active with bulk packaging and substantially higher availability (500,400 units).

Q: Does HR30-7R-10PC(31) meet current regulatory standards?

A: Yes. HR30-7R-10PC(31) is documented as ROHS3 compliant and REACH affected, meeting current European and international regulatory requirements for electronic components.

Q: Are contacts included with these connector housings?

A: No. Both HR30-7R-10PC(71) and HR30-7R-10PC(31) are supplied as housings only. Contacts must be sourced separately and crimped into the insert.