HR30-7PB-10SC Equivalent & Substitute Parts

Part Overview

The HR30-7PB-10SC is a 10-position circular connector plug housing manufactured by Hirose Electric Co Ltd, designed for free-hanging (in-line) applications with push-pull fastening. This connector features a polyphenylene sulfide (PPS) shell with IP67/IP68 ingress protection, UL94 V-0 flammability rating, and operates across -25°C to 85°C. The part is RoHS compliant and currently in active production status with 959 units in stock.

Substitute parts are identified when equivalent electrical and mechanical parameters are maintained, allowing for direct replacement in applications where component availability, packaging configurations, or compliance requirements necessitate alternative sourcing.

Substiute Parts

HR30-7PB-10SC

Hirose Electric Co LtdIn Stock: 1057HR30-7PB-10SC Datasheet

Current PartRFQ

HR30-7P-10SC(71)

Hirose Electric Co LtdIn Stock: 1145HR30-7P-10SC(71) Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

The HR30-7P-10SC(71) qualifies as a direct substitute based on matching all critical electrical and mechanical parameters: identical connector type (plug housing), position count (10), shell size (7), mounting configuration (free hanging in-line), fastening mechanism (push-pull), keyed orientation, shell material (PPS), housing color (black), ingress protection rating (IP67/IP68), operating temperature range (-25°C to 85°C), contact type (crimp), contact shape (square), and unshielded configuration.

The substitution is valid across the following key parameters:

• Connector classification and functional purpose
• Electrical interface specifications (position count, contact type, contact shape)
• Mechanical interface specifications (shell size, mounting type, fastening type, orientation)
• Environmental performance (ingress protection, operating temperature)
• Material properties (shell material, flammability rating)

Parameter Comparison

Engineering Selection Recommendations

Both the HR30-7PB-10SC and HR30-7P-10SC(71) maintain active product status with full compliance to applicable regulations. The HR30-7P-10SC(71) carries ROHS3 compliance and REACH affected status, providing enhanced regulatory coverage for applications requiring extended environmental compliance documentation.

The primary distinction between these parts lies in the included accessory package. The HR30-7PB-10SC includes 4 pieces (2 connectors, 1 backshell, 1 spring), while the HR30-7P-10SC(71) includes 6 pieces (2 connectors, 1 backshell, 1 bushing, 1 cage clamp, 1 spring). Selection between these parts should be based on whether the additional bushing and cage clamp components are required for the intended application assembly.

Frequently Asked Questions (FAQ)

Q: Can HR30-7P-10SC(71) directly replace HR30-7PB-10SC in existing designs?

A: Yes. Both parts share identical electrical and mechanical interface specifications, including connector type, position count, shell size, mounting configuration, fastening mechanism, and environmental ratings. Direct substitution is valid from an interface compatibility standpoint.

Q: What is the difference between these two part numbers?

A: The primary difference is the accessory package composition. HR30-7PB-10SC includes a backshell and spring, while HR30-7P-10SC(71) includes a backshell, bushing, cage clamp, and spring. Both connectors themselves are functionally equivalent.

Q: Are there compliance differences between these parts?

A: HR30-7P-10SC(71) carries ROHS3 compliance and REACH affected status, compared to RoHS compliance for HR30-7PB-10SC. Both maintain UL94 V-0 flammability rating, IP67/IP68 ingress protection, and EAR99 export classification.

Q: Do these parts require contacts to be purchased separately?

A: Yes. Both part numbers explicitly note that contacts are not included and must be sourced separately.

Q: What is the operating temperature range for these connectors?

A: Both parts operate across -25°C to 85°C, suitable for industrial and commercial applications within this thermal envelope.

Q: Are these connectors shielded?

A: No. Both HR30-7PB-10SC and HR30-7P-10SC(71) are unshielded connectors. Shielding must be provided through external means if electromagnetic interference protection is required.