HR30-7P-10SC Equivalent & Substitute Parts

Part Overview

The HR30-7P-10SC is a 10-position circular connector plug housing manufactured by Hirose Electric Co Ltd. This free-hanging (in-line) connector features a push-pull fastening mechanism, polyphenylene sulfide (PPS) shell construction, and IP67/IP68 ingress protection rating. The part is classified as obsolete, making identification of active equivalent models essential for procurement and design continuity. Substitute parts must maintain identical electrical and mechanical specifications to ensure direct compatibility in existing applications.

Substiute Parts

HR30-7P-10SC

Hirose Electric Co LtdIn Stock: 1183HR30-7P-10SC Datasheet

Current PartRFQ

HR30-7P-10SC(71)

Hirose Electric Co LtdIn Stock: 1145HR30-7P-10SC(71) Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the HR30-7P-10SC is determined by strict equivalence across the following critical parameters: connector type (plug housing), number of positions (10), shell size insert (7), mounting configuration (free hanging in-line), fastening mechanism (push-pull), shell material (PPS), ingress protection rating (IP67/IP68), operating temperature range (-25°C ~ 85°C), contact type (crimp), and keyed orientation.

The HR30-7P-10SC(71) qualifies as a direct substitute based on complete alignment with all specified parameters. The primary distinction between the main part and its substitute is product status and packaging configuration, not functional or mechanical characteristics.

Parameter Comparison

Engineering Selection Recommendations

The HR30-7P-10SC(71) is the direct active equivalent for the obsolete HR30-7P-10SC. Both parts maintain identical electrical and mechanical specifications across all critical parameters. Selection between these parts should be based on regulatory compliance requirements and procurement availability.

For applications requiring RoHS3 compliance, the HR30-7P-10SC(71) is the appropriate choice. For legacy systems or applications where RoHS compliance is not mandated, either part satisfies the functional requirements. The HR30-7P-10SC(71) is supplied in tray packaging, whereas the original part is supplied in bulk configuration.

Frequently Asked Questions (FAQ)

Q: Can HR30-7P-10SC(71) be used as a direct replacement for HR30-7P-10SC?

A: Yes. Both parts are electrically and mechanically identical across all specified parameters, including connector type, position count, shell size, mounting configuration, fastening mechanism, material composition, and ingress protection rating.

Q: What is the primary difference between these two parts?

A: The HR30-7P-10SC is classified as obsolete, while HR30-7P-10SC(71) is active. Additionally, HR30-7P-10SC(71) is RoHS3 compliant and REACH affected, whereas the original part is RoHS non-compliant and REACH unaffected. Packaging differs: bulk versus tray.

Q: Are there any compatibility concerns when substituting HR30-7P-10SC with HR30-7P-10SC(71)?

A: No compatibility concerns exist. The parts are functionally equivalent and will perform identically in applications designed for the HR30-7P-10SC.

Q: Does packaging configuration affect connector performance?

A: Packaging configuration does not affect connector performance or electrical characteristics. The difference between bulk and tray packaging is logistical only.

Q: What compliance certifications apply to both parts?

A: Both parts carry UL94 V-0 material flammability rating and operate within the -25°C ~ 85°C temperature range. The HR30-7P-10SC(71) additionally meets RoHS3 compliance requirements.