HR30-7JB-12P Equivalent & Substitute Parts

Part Overview

The HR30-7JB-12P is a 12-position circular connector jack with male pins, manufactured by Hirose Electric Co Ltd. This connector is designed for industrial, marine, and medical applications requiring reliable power distribution in harsh environments. The part features solder cup termination, push-pull fastening, and IP67/IP68 ingress protection rating. As an active product with 677 units in stock, this connector remains available; however, equivalent substitute parts may be required for specific application requirements, inventory optimization, or design standardization across product lines.

Substiute Parts

HR30-7JB-12P

Hirose Electric Co LtdIn Stock: 743HR30-7JB-12P Datasheet

Current PartRFQ

HR30-7J-12P(71)

Hirose Electric Co LtdIn Stock: 852HR30-7J-12P(71) Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

The HR30-7J-12P(71) qualifies as a direct substitute for the HR30-7JB-12P based on the following critical parameters:

Matching Parameters:

• Connector type: Jack, Male Pins
• Number of positions: 12 (Power)
• Shell size - insert: 7
• Termination method: Solder Cup
• Fastening type: Push-Pull
• Orientation: Keyed
• Contact finish - mating: Gold
• Current rating: 2A
• Voltage rating: 30VAC, 42VDC
• Ingress protection: IP67/IP68 - Dust Tight, Waterproof
• Operating temperature range: -25°C ~ 85°C
• Material flammability rating: UL94 V-0
• Series: HR30
• Product status: Active
• Applications: Industrial, Marine, Medical

Both parts maintain identical electrical and mechanical interface specifications, ensuring functional interchangeability in circuit designs and mechanical assemblies.

Parameter Comparison

Engineering Selection Recommendations

Both the HR30-7JB-12P and HR30-7J-12P(71) are active products from Hirose Electric Co Ltd with identical electrical and mechanical specifications. The HR30-7J-12P(71) carries ROHS3 compliance status, providing enhanced regulatory alignment for applications subject to stricter environmental standards. Both parts maintain UL94 V-0 flammability ratings and unlimited moisture sensitivity levels, suitable for industrial, marine, and medical applications. Selection between these parts should be based on specific regulatory requirements, inventory availability, and supply chain considerations rather than functional performance differences.

Frequently Asked Questions (FAQ)

Q: Can HR30-7J-12P(71) be used as a direct replacement for HR30-7JB-12P in existing designs?

A: Yes. Both connectors share identical connector type, pin count, shell size, termination method, fastening mechanism, and electrical ratings. They are mechanically and electrically interchangeable in circuit designs and mechanical assemblies.

Q: What are the key differences between these two part numbers?

A: The primary difference is the RoHS compliance designation. HR30-7J-12P(71) carries ROHS3 compliance, while HR30-7JB-12P carries RoHS Compliant status. Both parts meet UL94 V-0 flammability requirements and maintain identical electrical and mechanical specifications.

Q: Are there any cable opening or backshell material differences?

A: The HR30-7J-12P(71) specifies a cable opening range of 0.244" ~ 0.276" (6.20mm ~ 7.00mm) and Polyphenylene Sulfide (PPS) backshell material. The HR30-7JB-12P does not specify these parameters in the provided data. Both parts feature backshell and strain relief as standard features.

Q: Which part should be selected for new designs?

A: Selection depends on regulatory and compliance requirements. For applications requiring ROHS3 compliance, HR30-7J-12P(71) is the appropriate choice. Both parts are active products with adequate inventory availability.

Q: Are both parts suitable for marine and medical applications?

A: Yes. Both connectors are rated for industrial, marine, and medical applications with IP67/IP68 ingress protection and operating temperature range of -25°C ~ 85°C.