HR30-7JB-10PC Equivalent & Substitute Parts

Part Overview

The HR30-7JB-10PC is a 10-position circular connector jack housing manufactured by Hirose Electric Co Ltd, designed for free-hanging (in-line) applications with push-pull fastening. This connector features a polyphenylene sulfide (PPS) shell with IP67/IP68 ingress protection, making it suitable for dust-tight and waterproof environments. The part is currently active in production with 854 units in stock. Substitute parts are identified when equivalent electrical and mechanical parameters are maintained across the HR30 series, allowing for component interchangeability in applications where specific packaging or accessory configurations differ.

Substiute Parts

HR30-7JB-10PC

Hirose Electric Co LtdIn Stock: 880HR30-7JB-10PC Datasheet

Current PartRFQ

HR30-7J-10PC(71)

Hirose Electric Co LtdIn Stock: 899HR30-7J-10PC(71) Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the HR30-7JB-10PC is determined by strict equivalence across the following critical parameters:

• Series designation (HR30)
• Connector type (Jack Housing for Male Pins)
• Number of positions (10)
• Shell size - insert (7)
• Mounting type (Free Hanging/In-Line)
• Fastening type (Push-Pull)
• Shell material (Polyphenylene Sulfide)
• Ingress protection rating (IP67/IP68)
• Operating temperature range (-25°C ~ 85°C)

The identified substitute part HR30-7J-10PC(71) maintains all critical electrical and mechanical parameters. Differences in packaging configuration (included accessories such as cage clamp and cord tube) and RoHS compliance revision level do not affect functional interchangeability in the connector interface itself.

Parameter Comparison

Engineering Selection Recommendations

Both HR30-7JB-10PC and HR30-7J-10PC(71) are active production parts with full compliance to applicable standards. The HR30-7J-10PC(71) carries ROHS3 compliance and REACH affected status, representing current regulatory alignment. The primary distinction between these parts is the accessory package: HR30-7JB-10PC includes an O-ring, while HR30-7J-10PC(71) includes a cage clamp and cord tube. Selection should be based on the specific accessory requirements of the application assembly. Both parts maintain identical electrical and mechanical interface specifications, ensuring functional interchangeability at the connector level.

Frequently Asked Questions (FAQ)

Q: Are HR30-7JB-10PC and HR30-7J-10PC(71) electrically and mechanically interchangeable?

A: Yes. Both parts maintain identical specifications for connector type, position count, shell size, mounting configuration, fastening mechanism, material composition, ingress protection rating, and operating temperature range. The connector interface is fully compatible.

Q: What is the difference between these two parts?

A: The primary difference is the included accessory package. HR30-7JB-10PC includes a backshell, nut, and O-ring. HR30-7J-10PC(71) includes a backshell, cage clamp, cord tube, and nut. The connector housing itself is identical.

Q: Does the difference in RoHS compliance status affect substitution?

A: No. HR30-7J-10PC(71) carries ROHS3 compliance, which represents an updated regulatory standard. This does not affect the functional or mechanical compatibility of the connector interface.

Q: Can I use HR30-7J-10PC(71) in an application originally designed for HR30-7JB-10PC?

A: Substitution is valid provided the application does not specifically require the O-ring included with HR30-7JB-10PC. If the O-ring is functionally necessary, the original part should be used.

Q: Are both parts currently available?

A: Yes. HR30-7JB-10PC has 854 units in stock, and HR30-7J-10PC(71) has 867 units in stock, both as new original inventory.

Q: What is the significance of the shell size designation "7"?

A: Shell size 7 is a standardized dimension within the HR30 series that determines the physical envelope and mating interface of the connector. Both substitute parts share this specification, ensuring mechanical compatibility.