HR30-6R-6P Equivalent & Substitute Parts

Part Overview

The HR30-6R-6P is a 6-position circular connector receptacle with male pins and solder cup termination, manufactured by Hirose Electric Co Ltd. This connector is classified as obsolete, which necessitates identification of active equivalent parts for ongoing procurement and system maintenance. The HR30 series provides standardized circular connector solutions for applications requiring reliable electrical connections with solder cup termination.

Substiute Parts

HR30-6R-6P

Hirose Electric Co LtdIn Stock: 1167HR30-6R-6P Datasheet

Current PartRFQ

HR30-6R-6P(71)

Hirose Electric Co LtdIn Stock: 1000216HR30-6R-6P(71) Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the HR30-6R-6P is determined by the following critical parameters:

• Series Compatibility: Both parts belong to the HR30 series, ensuring mechanical and electrical interface compatibility
• Position Count: Maintained at 6 positions across all substitutes
• Connector Type: Receptacle configuration with male pins preserved
• Termination Method: Solder cup termination maintained for PCB assembly compatibility
• Manufacturer: Hirose Electric Co Ltd as original equipment manufacturer

The substitute part HR30-6R-6P(71) represents an active production variant of the same base connector design, with enhanced specifications and current compliance certifications.

Parameter Comparison

Engineering Selection Recommendations

The HR30-6R-6P(71) is the active production equivalent for the obsolete HR30-6R-6P. Selection of the HR30-6R-6P(71) is supported by the following factors:

• Product Status: The substitute part maintains active production status, ensuring long-term availability and supply chain continuity
• Regulatory Compliance: HR30-6R-6P(71) achieves ROHS3 compliance, meeting current environmental and material restriction requirements
• Series Continuity: Both connectors belong to the HR30 series with identical mechanical and electrical interfaces
• Functional Equivalence: Identical connector type, position count, and solder cup termination ensure direct functional replacement
• Enhanced Specifications: The substitute provides documented electrical ratings (2A, 100VAC/140VDC), ingress protection (IP67/IP68), and operating temperature range (-25°C ~ 85°C)

Frequently Asked Questions (FAQ)

Q: Can HR30-6R-6P(71) be used as a direct replacement for HR30-6R-6P?

A: Yes. Both connectors share the HR30 series designation, 6-position configuration, receptacle male pin type, and solder cup termination. The HR30-6R-6P(71) is the active production variant with enhanced specifications and current compliance certifications.

Q: What is the difference between HR30-6R-6P and HR30-6R-6P(71)?

A: The primary differences are product status (obsolete vs. active), RoHS compliance (non-compliant vs. ROHS3 compliant), and documented electrical specifications. The HR30-6R-6P(71) includes specified current rating (2A), voltage rating (100VAC, 140VDC), operating temperature range (-25°C ~ 85°C), and ingress protection (IP67/IP68).

Q: Are there packaging differences between these parts?

A: The HR30-6R-6P(71) is supplied in Tray packaging. Packaging specifications for the original HR30-6R-6P are not provided in the technical data.

Q: What compliance certifications apply to HR30-6R-6P(71)?

A: The HR30-6R-6P(71) is ROHS3 compliant and REACH affected. Both parts share identical ECCN (EAR99) and HTSUS (8536.69.4020) classifications.

Q: Is the moisture sensitivity level the same for both parts?

A: Yes. Both HR30-6R-6P and HR30-6R-6P(71) have MSL 1 (Unlimited), indicating no moisture sensitivity restrictions for storage and handling.