HR30-6PA-6P Equivalent & Substitute Parts

Part Overview

The HR30-6PA-6P is a 6-position circular connector plug with male pins and solder cup termination, manufactured by Hirose Electric Co Ltd. This connector belongs to the HR30 series and is classified as obsolete. Due to its obsolete status, identifying equivalent and substitute parts is essential for maintaining system compatibility, ensuring supply chain continuity, and supporting legacy equipment requiring this connector type.

Substiute Parts

HR30-6PA-6P

Hirose Electric Co LtdIn Stock: 884HR30-6PA-6P Datasheet

Current PartRFQ

HR30-6PA-6P(71)

Hirose Electric Co LtdIn Stock: 4080HR30-6PA-6P(71) Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

The HR30-6PA-6P(71) serves as a direct substitute within the HR30 series. Substitution eligibility is determined by the following parameters:

• Manufacturer: Both parts are manufactured by Hirose Electric Co Ltd
• Series: Both belong to the HR30 circular connector series
• Connector Type: Both are plug connectors with male pins
• Number of Positions: Both feature 6-position configuration
• Termination Method: Both utilize solder cup termination
• Base Product Number: Both share the HR30 base product number

The HR30-6PA-6P(71) represents an active production variant of the same connector family, providing functional equivalence while offering improved availability and compliance status.

Parameter Comparison

Engineering Selection Recommendations

The HR30-6PA-6P(71) is the designated substitute for the obsolete HR30-6PA-6P. Selection should be based on the following factors:

Product Status: The HR30-6PA-6P is obsolete, making the HR30-6PA-6P(71) the active production equivalent. This ensures long-term supply availability and manufacturing support.

Compliance Requirements: The HR30-6PA-6P(71) achieves ROHS3 compliance, whereas the original part is RoHS non-compliant. For applications subject to RoHS regulations, the HR30-6PA-6P(71) is the appropriate choice. The original part remains suitable for legacy systems where RoHS compliance is not mandated.

REACH Status: The HR30-6PA-6P(71) is REACH Affected, indicating substance compliance documentation is available. The original part is REACH Unaffected. Both parts carry the same ECCN and HTSUS classification.

Moisture Sensitivity: Both parts share MSL 1 (Unlimited), indicating no moisture sensitivity constraints during storage or handling.

Frequently Asked Questions (FAQ)

Q: Can HR30-6PA-6P(71) be used as a direct replacement for HR30-6PA-6P?

A: Yes. Both connectors are 6-position male plug connectors with solder cup termination from the HR30 series. The HR30-6PA-6P(71) is the active production variant and serves as the direct substitute for the obsolete HR30-6PA-6P.

Q: What is the primary difference between these two parts?

A: The HR30-6PA-6P is obsolete, while the HR30-6PA-6P(71) is in active production. The HR30-6PA-6P(71) additionally provides ROHS3 compliance, gold-plated mating contacts, and enhanced specifications including IP67/IP68 ingress protection and UL94 V-0 flammability rating.

Q: Are there packaging differences between these parts?

A: The HR30-6PA-6P packaging is not specified. The HR30-6PA-6P(71) is supplied in Tray packaging.

Q: Do both parts have the same electrical ratings?

A: The original HR30-6PA-6P does not have specified electrical ratings in the available data. The HR30-6PA-6P(71) is rated for 2A current and 100VAC/140VDC voltage, with an operating temperature range of -25°C to 85°C.

Q: Which part should be selected for new designs?

A: The HR30-6PA-6P(71) should be selected for new designs due to its active production status, ROHS3 compliance, and enhanced specifications.

Q: Are both parts classified under the same HTSUS and ECCN codes?

A: Yes. Both parts share HTSUS code 8536.69.4020 and ECCN classification EAR99.