HR30-6P-6P Equivalent & Substitute Parts

Part Overview

The HR30-6P-6P is a 6-position circular connector plug with male pins and solder cup termination manufactured by Hirose Electric Co., Ltd. This part is classified as obsolete, which necessitates identification of active equivalent models to maintain supply chain continuity for applications requiring this connector type. The HR30 series provides reliable circular connector solutions for industrial and specialized applications.

Substiute Parts

HR30-6P-6P

Hirose Electric Co., Ltd.In Stock: 1034HR30-6P-6P Datasheet

Current PartRFQ

HR30-6P-6P(31)

Hirose Electric Co LtdIn Stock: 500250HR30-6P-6P(31) Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

The HR30-6P-6P(31) qualifies as a direct substitute based on the following critical parameters:

• Series Alignment: Both parts belong to the HR30 series, ensuring mechanical and electrical compatibility within the connector family
• Position Count: Both maintain 6-position configuration
• Connector Type: Both are plug connectors with male pins
• Termination Method: Both utilize solder cup termination for identical PCB integration
• Base Product Number: Both share HR30 as the base product number, confirming design lineage and interchangeability

The HR30-6P-6P(31) represents the active production variant of the obsolete HR30-6P-6P, with enhanced specifications including gold-plated contacts, improved ingress protection rating, and RoHS3 compliance.

Parameter Comparison

Engineering Selection Recommendations

The HR30-6P-6P(31) is the active production equivalent for the obsolete HR30-6P-6P. Selection of the HR30-6P-6P(31) is appropriate for new designs and replacement applications requiring:

• Continued availability from Hirose Electric Co., Ltd.
• Active product status with established supply chain
• RoHS3 compliance for regulated markets and applications
• Enhanced contact finish (gold plating) for improved corrosion resistance
• Improved ingress protection rating (IP67/IP68) for harsh environments

Applications currently using the HR30-6P-6P should transition to the HR30-6P-6P(31) to ensure long-term component availability and regulatory compliance. The mechanical and electrical compatibility between these parts supports direct substitution in existing designs.

Frequently Asked Questions (FAQ)

Q: Can the HR30-6P-6P(31) directly replace the HR30-6P-6P in existing assemblies?

A: Yes. Both parts share identical mechanical interfaces, pin configurations, and solder cup termination. The HR30-6P-6P(31) maintains full compatibility with applications designed for the HR30-6P-6P.

Q: What are the key differences between these two parts?

A: The HR30-6P-6P(31) provides enhanced specifications including gold-plated contacts, improved ingress protection (IP67/IP68), RoHS3 compliance, and documented electrical ratings (2A at 100VAC/140VDC). The original HR30-6P-6P lacks these detailed specifications.

Q: Is the HR30-6P-6P(31) available in the same packaging as the HR30-6P-6P?

A: The HR30-6P-6P(31) is supplied in bulk packaging. Packaging configuration should be verified against specific procurement requirements.

Q: What is the significance of the RoHS3 compliance on the HR30-6P-6P(31)?

A: RoHS3 compliance indicates the part meets current European Union Restriction of Hazardous Substances regulations. This is essential for applications in regulated markets and industries with environmental compliance requirements.

Q: Are there any temperature or environmental limitations for the HR30-6P-6P(31)?

A: The HR30-6P-6P(31) operates within -25°C to 85°C temperature range and provides IP67/IP68 ingress protection, suitable for industrial, marine, and medical applications.