HR01362J Equivalent & Substitute Parts

Part Overview

The HR01362J is a 3.6 kOhms ±5% 1/16W axial through-hole resistor manufactured by KYOCERA AVX using thick film composition. This component is classified as obsolete, making equivalent substitute parts necessary for ongoing production and maintenance applications. The part operates across a temperature range of -55°C to 125°C and is not RoHS compliant.

Substiute Parts

HR01362J

KYOCERA AVXIn Stock: 914HR01362J Datasheet

Current PartRFQ

CFR-12JB-52-3K6

YAGEOIn Stock: 3479CFR-12JB-52-3K6 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the HR01362J is based on the following critical parameters:

• Resistance Value: Must be 3.6 kOhms ±5%
• Package Type: Must be axial through-hole configuration
• Power Rating: Substitute must meet or exceed 0.063W minimum
• Tolerance: Must maintain ±5% tolerance
• Termination Count: Must have 2 terminations for direct pin compatibility

The CFR-12JB-52-3K6 qualifies as a substitute because it maintains identical resistance value and tolerance, uses the same axial package format, and provides higher power dissipation capability (0.167W vs. 0.063W), ensuring functional compatibility in the original circuit application.

Parameter Comparison

Engineering Selection Recommendations

The CFR-12JB-52-3K6 is the designated substitute for HR01362J applications. Selection is based on the following factors:

• Functional Equivalence: Identical resistance and tolerance specifications ensure electrical performance parity in circuit operation.
• Package Compatibility: Both components use axial through-hole configuration, enabling direct mechanical and electrical substitution without PCB redesign.
• Power Margin: The substitute's 0.167W rating exceeds the original 0.063W requirement, providing operational headroom in thermal conditions.
• Active Product Status: CFR-12JB-52-3K6 is actively manufactured and stocked, ensuring long-term availability compared to the obsolete HR01362J.
• Compliance Advantage: The substitute meets ROHS3 compliance requirements, supporting modern manufacturing and environmental standards.
• Temperature Performance: Extended operating range (-55°C to 155°C) accommodates broader application environments than the original part.

Frequently Asked Questions (FAQ)

Q: Can CFR-12JB-52-3K6 be used as a direct replacement for HR01362J?

A: Yes. Both components share identical resistance value (3.6 kOhms), tolerance (±5%), and axial package configuration. The substitute's higher power rating (0.167W vs. 0.063W) and extended temperature range provide enhanced performance margins without affecting circuit functionality.

Q: What is the difference between thick film and carbon film composition?

A: Composition differences affect temperature coefficient stability and frequency response characteristics. The substitute's carbon film composition exhibits a wider temperature coefficient range (-500/+350ppm/°C) compared to the original thick film (±250ppm/°C). For DC and low-frequency applications, this difference is not functionally significant.

Q: Are there any PCB layout considerations when substituting these parts?

A: No layout modifications are required. Both components use identical axial through-hole package format with 2 terminations, enabling direct pin-for-pin substitution without PCB redesign.

Q: Why is the substitute rated for higher power dissipation?

A: The CFR-12JB-52-3K6 is designed with a larger physical envelope (1.90mm diameter × 3.40mm length vs. 0.91mm × 1.91mm), allowing greater heat dissipation capability. This provides operational safety margin without affecting electrical performance in applications requiring only 0.063W.

Q: Is RoHS compliance a functional requirement for this substitution?

A: RoHS compliance is a manufacturing and environmental standard, not a functional electrical parameter. The ROHS3-compliant substitute meets modern regulatory requirements for new production and procurement cycles.