HM2P95PNE150GF Equivalent & Substitute Parts

Part Overview

The HM2P95PNE150GF is a 200-position header connector with male pins, manufactured by Amphenol ICC (FCI) as part of the Millipacs® series. This through-hole press-fit connector operates at 1.5A current rating and 750Vrms voltage rating across an operating temperature range of -55°C to 125°C. The part is currently listed as obsolete, making identification of suitable substitutes necessary for ongoing system support and component procurement.

Substiute Parts

HM2P95PNE150GF

Amphenol ICC (FCI)In Stock: 685HM2P95PNE150GF Datasheet

Current PartRFQ

HM2P95PNE150GFLF

Amphenol ICC (FCI)In Stock: 841HM2P95PNE150GFLF Datasheet

DirectRFQ

0740602506

MolexIn Stock: 10410740602506 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the HM2P95PNE150GF is determined by the following critical parameters:

• 200-position connector configuration
• 0.079" (2.00mm) pitch spacing
• 8-row layout
• Header connector with male pins
• Through-hole mounting with press-fit termination
• Gold contact finish
• Current rating minimum 1.5A
• Voltage rating minimum 750Vrms
• Operating temperature range encompassing -55°C to 125°C

Two substitute parts meet these criteria with varying degrees of parameter alignment and compliance status.

Parameter Comparison

Engineering Selection Recommendations

HM2P95PNE150GFLF is the primary substitute for HM2P95PNE150GF. Both parts are manufactured by Amphenol ICC (FCI) within the Millipacs® series and share identical electrical and mechanical specifications. The HM2P95PNE150GFLF differs only in product status (active versus obsolete) and compliance certifications (RoHS compliant and REACH affected versus non-compliant and REACH unaffected). This part maintains full compatibility with the original design and is recommended for new procurement and system support.

0740602506 (Molex VHDM 74060 series) is a secondary substitute option. While it maintains the same 200-position, 2.00mm pitch, 8-row configuration with through-hole press-fit termination and gold contacts, it introduces parameter deviations: higher current rating (3A versus 1.5A), lower voltage rating (120V versus 750Vrms), reduced maximum operating temperature (105°C versus 125°C), and shielded connector design. This part is suitable only when system requirements can accommodate these parameter changes and the lower voltage rating does not conflict with application specifications.

Frequently Asked Questions (FAQ)

Q: Can HM2P95PNE150GFLF be used as a direct replacement for HM2P95PNE150GF?

A: Yes. Both parts share identical electrical and mechanical parameters including position count, pitch, row configuration, current rating, voltage rating, and operating temperature range. The HM2P95PNE150GFLF is the active production equivalent with improved compliance status.

Q: What are the key differences between HM2P95PNE150GFLF and 0740602506?

A: The Molex 0740602506 has a lower voltage rating (120V versus 750Vrms), higher current rating (3A versus 1.5A), reduced maximum operating temperature (105°C versus 125°C), and includes shielding. These differences may affect suitability depending on application requirements.

Q: Is the voltage rating difference between 750Vrms and 120V significant?

A: Yes. The 0740602506 operates at 120V while the original part is rated for 750Vrms. This represents a substantial reduction in voltage capability and must be evaluated against system requirements before substitution.

Q: Does packaging format affect electrical or mechanical compatibility?

A: No. Packaging format (bulk, tray, or tube) affects only handling, storage, and procurement logistics. Electrical and mechanical compatibility is determined by connector specifications, not packaging type.

Q: Are there RoHS compliance implications for substitution?

A: The HM2P95PNE150GFLF is RoHS compliant while the original HM2P95PNE150GF is non-compliant. If RoHS compliance is required for your application, the HM2P95PNE150GFLF is the appropriate choice. The Molex 0740602506 is ROHS3 compliant.