HM2P67PMG2H4GL Equivalent & Substitute Parts

Part Overview

The HM2P67PMG2H4GL is a 127-position header connector from Amphenol ICC (FCI) in the Millipacs® series, designed for backplane applications with press-fit termination and 2.00mm pitch. This part is classified as obsolete, making equivalent and substitute parts necessary for ongoing system support and new designs. The connector features gold-plated contacts rated for 1.5A at 750Vrms across an operating temperature range of -55°C to 125°C.

Substiute Parts

HM2P67PMG2H4GL

Amphenol ICC (FCI)In Stock: 1122HM2P67PMG2H4GL Datasheet

Current PartRFQ

HM2P67PMG2H4GLLF

Amphenol ICC (FCI)In Stock: 799HM2P67PMG2H4GLLF Datasheet

DirectRFQ

17130952201

HARTINGIn Stock: 105417130952201 Datasheet

MFR RecommendedRFQ

CP2-HAB095-GE1-KR

3MIn Stock: 1063CP2-HAB095-GE1-KR Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the HM2P67PMG2H4GL is determined by the following critical parameters:

Primary Substitution Criteria:

• Connector Type: Header, Male Pins
• Pitch: 0.079" (2.00mm)
• Mounting Type: Through Hole
• Termination: Press-Fit
• Contact Finish: Gold
• Operating Temperature Range: -55°C ~ 125°C
• Moisture Sensitivity Level: 1 (Unlimited)

Position Configuration Consideration: The main part features 127 positions (95 + 32 Ground) across 5 + 2 rows. Direct equivalents maintain this exact configuration. Partial substitutes with 95 positions (5 rows) are available from alternative manufacturers and represent functional alternatives for applications requiring fewer signal positions while maintaining the same electrical and mechanical interface standards.

Parameter Comparison

Engineering Selection Recommendations

Direct Equivalent (Recommended for Replacement): HM2P67PMG2H4GLLF is the direct equivalent to HM2P67PMG2H4GL, maintaining identical electrical and mechanical specifications while offering active product status and RoHS compliance. This part is the primary choice for direct substitution in existing designs.

Alternative Substitutes (Position-Reduced Configurations): 17130952201 (HARTING har-bus® HM) and CP2-HAB095-GE1-KR (3M MetPak™ CP2) provide 95-position configurations with identical pitch, mounting, and termination characteristics. These alternatives are suitable for applications where the full 127-position capacity is not required. Both maintain the -55°C to 125°C operating temperature range and press-fit termination standard.

Compliance Considerations: HM2P67PMG2H4GLLF and CP2-HAB095-GE1-KR are RoHS Compliant. 17130952201 is ROHS3 Compliant. All three active substitutes meet current regulatory requirements for new designs.

Frequently Asked Questions (FAQ)

Q: Can HM2P67PMG2H4GLLF be used as a direct replacement for HM2P67PMG2H4GL? A: Yes. HM2P67PMG2H4GLLF maintains identical specifications for connector type, position count, pitch, mounting, termination, contact finish, current rating, voltage rating, and operating temperature. The primary difference is product status (active vs. obsolete) and packaging format (tray vs. bulk).

Q: What is the difference between the 127-position and 95-position substitutes? A: The main part and HM2P67PMG2H4GLLF feature 127 positions (95 signal + 32 ground) across 5 + 2 rows. The 17130952201 and CP2-HAB095-GE1-KR alternatives provide 95 positions across 5 rows. Position reduction affects signal capacity but maintains identical electrical interface standards and mechanical compatibility for press-fit termination.

Q: Are there compliance differences between the substitute parts? A: HM2P67PMG2H4GLLF and CP2-HAB095-GE1-KR are RoHS Compliant. 17130952201 is ROHS3 Compliant. All three meet current regulatory standards. The original HM2P67PMG2H4GL does not specify RoHS status due to its obsolete classification.

Q: What is the current rating difference between substitutes? A: HM2P67PMG2H4GL and HM2P67PMG2H4GLLF are rated for 1.5A. 17130952201 is rated for 1A. CP2-HAB095-GE1-KR does not specify a current rating. Design applications requiring 1.5A should prioritize HM2P67PMG2H4GLLF.

Q: Does packaging format affect electrical performance? A: No. Packaging differences (bulk, tray, tube) do not affect electrical or mechanical performance. Selection should be based on procurement and assembly requirements.

Q: Can these parts be used interchangeably in existing PCB designs? A: HM2P67PMG2H4GLLF is a direct footprint and electrical equivalent. The 95-position alternatives (17130952201 and CP2-HAB095-GE1-KR) require PCB layout modification due to reduced position count and row configuration changes.