HM2P67PKA3A0GF Equivalent & Substitute Parts

Part Overview

The HM2P67PKA3A0GF is a 95-position header connector with male pins manufactured by Amphenol ICC (FCI) in the Millipacs® series. This backplane connector features 0.079" (2.00mm) pitch, through-hole press-fit termination, and is rated for 1.5 A at 750Vrms across an operating temperature range of -55°C to 125°C. The part is currently obsolete, making equivalent substitutes necessary for ongoing system support and new designs requiring compatible backplane-to-daughtercard connectivity.

Substiute Parts

HM2P67PKA3A0GF

Amphenol ICC (FCI)In Stock: 797HM2P67PKA3A0GF Datasheet

Current PartRFQ

HM2P67PKA3A0GFLF

Amphenol ICC (FCI)In Stock: 822HM2P67PKA3A0GFLF Datasheet

DirectRFQ

17130952201

HARTINGIn Stock: 105417130952201 Datasheet

MFR RecommendedRFQ

CP2-HAB095-GE1-KR

3MIn Stock: 1063CP2-HAB095-GE1-KR Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the HM2P67PKA3A0GF is determined by strict equivalence across the following critical parameters: connector type (header, male pins), number of positions (95), pitch (0.079"/2.00mm), number of rows (5), connector style (AB 19), mounting type (through hole), and termination method (press-fit). Contact finish, current rating, voltage rating, and operating temperature range must remain consistent or exceed the original specification. Moisture sensitivity level and ECCN classification are also maintained across all qualified substitutes.

The identified substitutes are grouped as follows:

Direct Amphenol ICC Variant: HM2P67PKA3A0GFLF differs only in packaging (tray) and product status (active), maintaining identical electrical and mechanical specifications.

Manufacturer-Recommended Alternatives: 17130952201 (HARTING har-bus® HM series) and CP2-HAB095-GE1-KR (3M MetPak™ CP2 series) meet all core dimensional and electrical parameters while offering active product status and current compliance certifications.

Parameter Comparison

Engineering Selection Recommendations

HM2P67PKA3A0GFLF is the primary substitute for the obsolete HM2P67PKA3A0GF. This Amphenol ICC variant maintains identical electrical and mechanical specifications while offering active product status and RoHS compliance. Selection of this part eliminates supply chain risk associated with obsolete inventory.

17130952201 (HARTING) is suitable for applications where the 1 A current rating is sufficient. This part carries ROHS3 compliance and REACH unaffected status, providing enhanced regulatory alignment for European markets. Operating temperature range and connector geometry remain fully compatible.

CP2-HAB095-GE1-KR (3M) is applicable for CompactPCI hot-swap backplane applications. This part maintains all dimensional and pitch specifications with RoHS compliance. Selection depends on system architecture requirements and connector usage classification.

All three substitutes maintain the same ECCN (EAR99) and HTSUS classification as the original part, ensuring consistent export and tariff treatment.

Frequently Asked Questions (FAQ)

Q: Can HM2P67PKA3A0GFLF be used as a direct replacement for HM2P67PKA3A0GF?

A: Yes. Both parts are manufactured by Amphenol ICC in the Millipacs® series with identical connector type, position count, pitch, row configuration, mounting type, termination method, contact finish, current rating, voltage rating, and operating temperature range. The only differences are packaging format (tray versus unspecified) and product status (active versus obsolete).

Q: What is the current rating difference between HM2P67PKA3A0GF and the HARTING 17130952201 substitute?

A: The original part is rated for 1.5 A, while the HARTING substitute is rated for 1 A. This represents a 33% reduction in current capacity. Selection of the HARTING part requires confirmation that circuit current requirements do not exceed 1 A per contact.

Q: Are all substitutes compatible with the same mating connectors?

A: All substitutes maintain the AB 19 connector style, 95-position configuration, 0.079" (2.00mm) pitch, and 5-row layout. Mechanical and electrical compatibility with existing mating connectors is preserved across all qualified substitutes.

Q: What compliance certifications differ among the substitutes?

A: The original HM2P67PKA3A0GF does not specify RoHS status. HM2P67PKA3A0GFLF is RoHS Compliant. The HARTING 17130952201 is ROHS3 Compliant with REACH Unaffected status. The 3M CP2-HAB095-GE1-KR is RoHS Compliant. All parts share EAR99 ECCN and 8536.69.4040 HTSUS classification.

Q: Does packaging format affect electrical or mechanical performance?

A: No. Packaging format (tray, tube, or bulk) affects only handling, storage, and logistics. Electrical and mechanical specifications remain identical regardless of packaging selection.

Q: What is the connector usage difference between HARTING and 3M substitutes?

A: The HARTING 17130952201 is designated for backplane-to-daughtercard connectivity. The 3M CP2-HAB095-GE1-KR is designated for CompactPCI hot-swap applications. Both support the same physical connector geometry and electrical parameters; usage classification reflects intended system architecture.