HM2P65PNG3F4GLLF Equivalent & Substitute Parts

Part Overview

The HM2P65PNG3F4GLLF is a 169-position backplane connector header manufactured by Amphenol ICC (FCI) in the Millipacs® series. This press-fit through-hole connector features a 2.00mm pitch and supports 1.5A current at 750Vrms, operating across -55°C to 125°C. The part is Active status and RoHS Compliant. Substitute parts are identified when equivalent electrical and mechanical parameters align with application requirements, particularly when inventory availability, packaging preferences, or series standardization necessitate alternative sourcing.

Substiute Parts

HM2P65PNG3F4GLLF

Amphenol ICC (FCI)In Stock: 1041HM2P65PNG3F4GLLF Datasheet

Current PartRFQ

17151252201

HARTINGIn Stock: 90917151252201 Datasheet

MFR RecommendedRFQ

3-100141-0

TE Connectivity AMP ConnectorsIn Stock: 15213-100141-0 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the HM2P65PNG3F4GLLF is determined by alignment of the following critical parameters:

• Pitch: 0.079" (2.00mm) — must match exactly
• Mounting Type: Through Hole — must match exactly
• Termination: Press-Fit — must match exactly
• Connector Type: Header, Male Pins — must match exactly
• Operating Temperature Range: -55°C ~ 125°C — must match or exceed
• Current Rating: 1.5 A minimum — substitute must meet or exceed
• Voltage Rating: 750Vrms minimum — substitute must meet or exceed
• RoHS Compliance: Required — substitute must maintain compliance status

The identified substitute parts (17151252201 and 3-100141-0) operate at reduced position counts (125 positions versus 169) but maintain electrical and mechanical compatibility across pitch, termination method, mounting type, and temperature range. These substitutes are suitable for applications where the full 169-position configuration is not required.

Parameter Comparison

Engineering Selection Recommendations

Both substitute parts maintain Active product status and RoHS compliance, ensuring long-term availability and regulatory alignment with the original HM2P65PNG3F4GLLF.

The 3-100141-0 (TE Connectivity) maintains the full 1.5A current rating and exceeds the minimum operating temperature range. However, its 500Vrms voltage rating is below the original 750Vrms specification and should be evaluated against application voltage requirements.

The 17151252201 (HARTING) provides ROHS3 compliance and maintains the full operating temperature range. Its 1.0A current rating is reduced from the original 1.5A specification and should be assessed against circuit current demands. Voltage rating is not specified for this part.

Selection between substitutes depends on whether the application requires the full 169-position configuration or can operate with 125 positions, and whether electrical ratings (current and voltage) of the substitute meet or exceed circuit requirements.

Frequently Asked Questions (FAQ)

Q: Can the 17151252201 or 3-100141-0 directly replace the HM2P65PNG3F4GLLF in all applications?

A: Direct replacement is possible only if the application does not require all 169 positions. Both substitutes provide 125 positions with identical pitch (2.00mm), mounting type (through hole), and termination method (press-fit). Electrical ratings must be verified: the 3-100141-0 supports 1.5A at 500Vrms, while the 17151252201 supports 1.0A with unspecified voltage rating.

Q: What is the primary difference between the main part and substitute parts?

A: The HM2P65PNG3F4GLLF provides 169 positions (125 + 44 ground) across 5 + 2 rows, while both substitutes provide 125 positions across 5 rows. All three maintain 2.00mm pitch, through-hole mounting, and press-fit termination. Electrical specifications vary: the main part supports 1.5A at 750Vrms, the TE Connectivity substitute supports 1.5A at 500Vrms, and the HARTING substitute supports 1.0A.

Q: Are there packaging differences between these parts?

A: Yes. The HM2P65PNG3F4GLLF is supplied in Tray packaging, the 17151252201 in Tube packaging, and the 3-100141-0 in Bulk packaging. Packaging selection may affect handling, storage, and procurement workflows.

Q: Which substitute is preferred if current rating is critical?

A: The 3-100141-0 (TE Connectivity) maintains the full 1.5A current rating of the original part. The 17151252201 (HARTING) is rated at 1.0A and should be used only if circuit current requirements do not exceed this limit.

Q: What compliance certifications apply to these parts?

A: The HM2P65PNG3F4GLLF and 3-100141-0 are RoHS Compliant. The 17151252201 is ROHS3 Compliant, which represents a more recent revision of the RoHS standard. All three parts are REACH Affected or REACH Unaffected as specified in their individual documentation.