HM2P65PNE374GF Equivalent & Substitute Parts

Part Overview

The HM2P65PNE374GF is a 169-position backplane connector header manufactured by Amphenol ICC (FCI) in the Millipacs® series. This press-fit through-hole connector features a 2.00mm pitch and supports 1.5A current at 750Vrms. The part is currently listed as obsolete, making identification of equivalent and substitute components essential for ongoing system support and procurement planning.

Substiute Parts

HM2P65PNE374GF

Amphenol ICC (FCI)In Stock: 1106HM2P65PNE374GF Datasheet

Current PartRFQ

HM2P65PNE374GFLF

Amphenol ICC (FCI)In Stock: 1111HM2P65PNE374GFLF Datasheet

DirectRFQ

100141-1

TE Connectivity AMP ConnectorsIn Stock: 1548100141-1 Datasheet

MFR RecommendedRFQ

17151251201

HARTINGIn Stock: 112817151251201 Datasheet

MFR RecommendedRFQ

17151252201

HARTINGIn Stock: 90917151252201 Datasheet

MFR RecommendedRFQ

3-100141-0

TE Connectivity AMP ConnectorsIn Stock: 15213-100141-0 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the HM2P65PNE374GF is determined by the following critical parameters:

Primary Substitution Criteria:

• Connector type: Header, Male Pins
• Pitch: 0.079" (2.00mm)
• Mounting type: Through Hole
• Termination method: Press-Fit
• Operating temperature range: -55°C to 125°C
• Moisture sensitivity level: 1 (Unlimited)

Substitution Groups:

Group 1: Direct Equivalent (Same Position Count) The HM2P65PNE374GFLF is a direct equivalent with identical electrical and mechanical specifications. The primary difference is packaging (Tray vs. unspecified) and product status (Active vs. Obsolete).

Group 2: Reduced Position Count Substitutes (125 Positions) The TE Connectivity 100141-1, 3-100141-0, HARTING 17151251201, and HARTING 17151252201 are 125-position headers. These parts maintain the 2.00mm pitch, through-hole mounting, and press-fit termination. However, they provide 125 positions instead of 169, representing a functional reduction in connector capacity. These substitutes are applicable only when system design accommodates the lower position count.

Parameter Comparison

Engineering Selection Recommendations

For Direct Replacement (Same Functionality): The HM2P65PNE374GFLF is the primary choice for direct substitution. It maintains all electrical and mechanical specifications of the obsolete HM2P65PNE374GF while offering active product status and RoHS compliance. This part is available in Tray packaging with 1005 units in stock.

For Reduced Position Count Applications: When system design permits operation with 125 positions instead of 169, the following alternatives are available:

• 3-100141-0 (TE Connectivity): Offers RoHS compliance, 1.5A current rating, and 500Vrms voltage rating. Available in Bulk packaging with 1510 units in stock.
• 17151251201 (HARTING): Provides ROHS3 compliance and REACH unaffected status. Current rating is 1.0A and voltage rating is 150V. Available in Tube packaging with 1074 units in stock.
• 17151252201 (HARTING): Provides ROHS3 compliance and REACH unaffected status. Current rating is 1.0A. Available in Tube packaging with 808 units in stock.
• 100141-1 (TE Connectivity): Offers 1.5A current rating and 500Vrms voltage rating. RoHS non-compliant. Available in Tube packaging with 1489 units in stock.

Selection among 125-position alternatives depends on compliance requirements (RoHS status), electrical specifications (current and voltage ratings), and regulatory considerations (REACH status).

Frequently Asked Questions (FAQ)

Q: Can the HM2P65PNE374GFLF be used as a direct replacement for the HM2P65PNE374GF? A: Yes. The HM2P65PNE374GFLF is electrically and mechanically identical to the HM2P65PNE374GF. The primary differences are packaging format (Tray) and product status (Active). Both maintain 169 positions, 2.00mm pitch, 1.5A current rating, and 750Vrms voltage rating.

Q: What is the key limitation of the 125-position substitutes? A: The 125-position alternatives (100141-1, 3-100141-0, 17151251201, 17151252201) provide 44 fewer positions than the original HM2P65PNE374GF. These substitutes are applicable only when the system design accommodates reduced connector capacity.

Q: Are there voltage rating differences among the 125-position substitutes? A: Yes. The TE Connectivity parts (100141-1, 3-100141-0) support 500Vrms, while the HARTING 17151251201 supports 150V. The HARTING 17151252201 does not specify a voltage rating. The original HM2P65PNE374GF operates at 750Vrms.

Q: What is the current rating difference between substitutes? A: The original HM2P65PNE374GF and most substitutes support 1.5A. The HARTING parts (17151251201, 17151252201) are rated for 1.0A. System design must accommodate this reduction if HARTING substitutes are selected.

Q: Which substitutes are RoHS compliant? A: HM2P65PNE374GFLF, 3-100141-0, 17151251201, and 17151252201 are RoHS compliant. The 100141-1 is RoHS non-compliant.

Q: What packaging options are available? A: HM2P65PNE374GFLF is supplied in Tray packaging. The 125-position alternatives are available in Tube (100141-1, 17151251201, 17151252201) or Bulk (3-100141-0) packaging.

Q: Are there REACH compliance considerations? A: The HARTING parts (17151251201, 17151252201) are REACH Unaffected. The TE Connectivity parts (100141-1, 3-100141-0) are REACH Affected.