HM2P65PMG2H4GLLF Equivalent & Substitute Parts

Part Overview

The HM2P65PMG2H4GLLF is a 169-position backplane connector header manufactured by Amphenol ICC (FCI) in the Millipacs® series. This press-fit through-hole connector features a 2.00mm pitch and supports 1.5A current at 750Vrms, operating across -55°C to 125°C. The connector is RoHS compliant and currently active in production. Substitute parts are identified for applications requiring reduced position counts or alternative manufacturer sourcing while maintaining core electrical and mechanical compatibility.

Substiute Parts

HM2P65PMG2H4GLLF

Amphenol ICC (FCI)In Stock: 878HM2P65PMG2H4GLLF Datasheet

Current PartRFQ

17151252201

HARTINGIn Stock: 90917151252201 Datasheet

MFR RecommendedRFQ

3-100141-0

TE Connectivity AMP ConnectorsIn Stock: 15213-100141-0 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the HM2P65PMG2H4GLLF are qualified based on the following core parameters that determine functional interchangeability:

• Pitch: 0.079" (2.00mm) — maintained across all substitutes
• Connector Type: Header, Male Pins — maintained across all substitutes
• Mounting Type: Through Hole — maintained across all substitutes
• Termination Method: Press-Fit — maintained across all substitutes
• Operating Temperature Range: -55°C ~ 125°C — maintained across all substitutes
• MSL Rating: 1 (Unlimited) — maintained across all substitutes
• Product Status: Active — all substitutes remain in active production

The identified substitutes operate at reduced position counts (125 positions versus 169 positions) and represent alternative manufacturer offerings from HARTING and TE Connectivity. These substitutes are suitable for applications where the full 169-position configuration is not required, provided the electrical and mechanical interface requirements align with the reduced position architecture.

Parameter Comparison

Engineering Selection Recommendations

17151252201 (HARTING har-bus® HM Series)

This substitute is suitable for applications requiring 125-position connectivity with identical pitch and mounting characteristics. The HARTING part maintains the same operating temperature range and MSL rating. Current rating is specified at 1.0A, which is lower than the main part. Voltage rating is not specified in available documentation. ROHS3 compliance and REACH Unaffected status may provide regulatory advantages in certain supply chain contexts.

3-100141-0 (TE Connectivity Z-PACK Series)

This substitute provides 125-position connectivity with current rating matching the main part at 1.5A. Voltage rating is specified at 500Vrms, which is lower than the main part's 750Vrms rating. RoHS compliance and REACH Affected status align with the main part. This option is suitable for applications where the reduced voltage specification is acceptable and 125-position configuration meets functional requirements.

Both substitutes maintain press-fit termination, through-hole mounting, 2.00mm pitch, and -55°C to 125°C operating range. Selection between substitutes and the main part depends on position count requirements, current/voltage specifications, and regulatory compliance needs specific to the application.

Frequently Asked Questions (FAQ)

Q: Can the 125-position substitutes directly replace the 169-position main part?

A: Direct replacement is possible only if the application circuit design requires 125 positions or fewer. The reduced position count and row configuration (5 rows versus 5 + 2 rows) mean the physical footprint and pin layout differ. PCB layout compatibility must be verified before substitution.

Q: What are the key electrical differences between the main part and substitutes?

A: The main part (HM2P65PMG2H4GLLF) supports 1.5A at 750Vrms. The HARTING substitute (17151252201) is rated at 1.0A with unspecified voltage. The TE Connectivity substitute (3-100141-0) supports 1.5A at 500Vrms. Applications requiring the full 750Vrms specification must use the main part or verify that 500Vrms is acceptable.

Q: Are all parts RoHS compliant?

A: Yes. The main part and TE Connectivity substitute are RoHS Compliant. The HARTING substitute is ROHS3 Compliant, which represents a more recent revision of the RoHS directive.

Q: What is the difference in packaging between these parts?

A: The main part (HM2P65PMG2H4GLLF) is supplied in Tray packaging. The HARTING substitute (17151252201) is supplied in Tube packaging. The TE Connectivity substitute (3-100141-0) is supplied in Bulk packaging. Packaging affects handling, storage, and integration into assembly processes.

Q: Do all parts have the same pitch and mounting type?

A: Yes. All parts maintain 0.079" (2.00mm) pitch and through-hole press-fit mounting. This ensures mechanical compatibility at the PCB interface level, provided position count and row configuration requirements are met.

Q: What is the significance of REACH status differences?

A: The main part and TE Connectivity substitute are REACH Affected, indicating they contain substances of concern under REACH regulations. The HARTING substitute is REACH Unaffected. For applications subject to REACH compliance requirements, the HARTING option may simplify regulatory documentation.

Q: Can current rating differences affect circuit performance?

A: Yes. If the application requires sustained current above 1.0A, the HARTING substitute (17151252201) rated at 1.0A is not suitable. The main part and TE Connectivity substitute, both rated at 1.5A, are appropriate for higher current applications within this specification.