Request Quote
(Ships tomorrow)
HM2P65PCT260N9LF Equivalent & Substitute Parts
Part Overview
The HM2P65PCT260N9LF is a 125-position header connector manufactured by Amphenol ICC (FCI) in the Millipacs® series. This through-hole, press-fit connector operates across -55°C to 125°C with a 750Vrms rating and 1.5A current capacity. The part is RoHS Compliant and currently Active in production. Substitute parts are necessary to address supply chain flexibility, alternative packaging requirements, or specific compliance certifications while maintaining electrical and mechanical compatibility.
Substiute Parts
Key Parameters
| Parameter | Value |
|---|---|
| Number of Positions | 125 |
| Pitch | 0.079" (2.00mm) |
| Number of Rows | 5 |
| Connector Type | Header, Male Pins |
| Mounting Type | Through Hole |
| Termination | Press-Fit |
| Operating Temperature Range | -55°C ~ 125°C |
| Current Rating | 1.5 A |
| Voltage Rating | 750Vrms |
| Contact Finish | Gold |
| Moisture Sensitivity Level | 1 (Unlimited) |
Substitute Part Grouping Explanation
Substitution eligibility is determined by strict alignment with the following core parameters:
- Position Count & Pitch: All substitutes maintain 125 positions at 0.079" (2.00mm) pitch
- Physical Configuration: All substitutes feature 5 rows, through-hole mounting, and press-fit termination
- Connector Type: All substitutes are header connectors with male pins
- Temperature Range: All substitutes operate across -55°C to 125°C
- Current Rating: Substitutes rated at 1.0A or 1.5A are acceptable
- Voltage Rating: Substitutes rated at 500Vrms or higher are acceptable
- Contact Finish: Gold or gold-palladium finishes are acceptable
- Compliance: RoHS Compliant or ROHS3 Compliant parts are acceptable
Substitutes are grouped by manufacturer: HARTING (har-bus® HM series), TE Connectivity AMP Connectors (Z-PACK series), and Amphenol ICC (Millipacs® series).
Parameter Comparison
| Part Number | Manufacturer | Series | Positions | Pitch | Rows | Current (A) | Voltage | Temp Range | Contact Finish | RoHS Status | Packaging | Inventory |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| HM2P65PCT260N9LF | Amphenol ICC (FCI) | Millipacs® | 125 | 0.079" (2.00mm) | 5 | 1.5 | 750Vrms | -55°C ~ 125°C | Gold (Flash) | RoHS Compliant | Tray | 735 Pcs |
| 17021252201 | HARTING | har-bus® HM | 125 | 0.079" (2.00mm) | 5 | 1.0 | — | -55°C ~ 125°C | Gold or Gold-Palladium | ROHS3 Compliant | Tube | 633 Pcs |
| 17151252201 | HARTING | har-bus® HM | 125 | 0.079" (2.00mm) | 5 | 1.0 | — | -55°C ~ 125°C | Gold or Gold-Palladium | ROHS3 Compliant | Tube | 808 Pcs |
| 3-100141-0 | TE Connectivity AMP Connectors | Z-PACK | 125 | 0.079" (2.00mm) | 5 | 1.5 | 500Vrms | -55°C ~ 125°C | — | RoHS Compliant | Bulk | 1510 Pcs |
| 5100141-1 | TE Connectivity AMP Connectors | Z-PACK | 125 | 0.079" (2.00mm) | 5 | 1.5 | 500Vrms | -55°C ~ 125°C | Gold (30.0µin) | RoHS Compliant | Tube | 2012 Pcs |
| 5100141-4 | TE Connectivity AMP Connectors | Z-PACK | 125 | 0.079" (2.00mm) | 5 | 1.5 | 500Vrms | -55°C ~ 125°C | Gold (50.0µin) | ROHS3 Compliant | Bulk | 1116 Pcs |
| 5100785-1 | TE Connectivity AMP Connectors | Z-PACK | 125 | 0.079" (2.00mm) | 5 | 1.5 | 500Vrms | -55°C ~ 125°C | Gold (30.0µin) | RoHS Compliant | Tube | 1488 Pcs |
| 5100785-9 | TE Connectivity AMP Connectors | Z-PACK | 125 | 0.079" (2.00mm) | 5 | 1.5 | 500Vrms | -55°C ~ 125°C | Gold (30.0µin) | RoHS Compliant | Tube | 761 Pcs |
| 5646731-1 | TE Connectivity AMP Connectors | Z-PACK | 125 | 0.079" (2.00mm) | 5 | 1.5 | 500Vrms | -55°C ~ 125°C | Gold (30.0µin) | RoHS Compliant | Tube | 936 Pcs |
Engineering Selection Recommendations
Primary Substitutes (Highest Compatibility)
TE Connectivity AMP Connectors Z-PACK series parts (5100141-1, 5100141-4, 5100785-1, 5100785-9, 5646731-1) and 3-100141-0 maintain full electrical equivalence with the HM2P65PCT260N9LF. All are RoHS Compliant or ROHS3 Compliant and Active in production. These parts differ only in packaging format (Tube or Bulk) and contact finish thickness. Selection among these should be based on packaging requirements and inventory availability.
Secondary Substitutes (Current Rating Consideration)
HARTING har-bus® HM series parts (17021252201, 17151252201) are ROHS3 Compliant and Active but rated at 1.0A versus the original 1.5A. These are suitable for applications where the 1.0A current rating meets system requirements. Voltage rating data is not provided for these parts.
Packaging Considerations
The original HM2P65PCT260N9LF is supplied in Tray packaging. Substitutes are available in Tube or Bulk packaging. Tube packaging (17021252201, 17151252201, 5100141-1, 5100785-1, 5100785-9, 5646731-1) is suitable for standard component handling. Bulk packaging (3-100141-0, 5100141-4) accommodates high-volume assembly operations.
Frequently Asked Questions (FAQ)
Q: Can HARTING 17021252201 or 17151252201 replace the HM2P65PCT260N9LF in all applications?
A: These parts are mechanically and thermally compatible but are rated at 1.0A versus the original 1.5A. They are suitable only for applications where the lower current rating is acceptable. Verify system current requirements before substitution.
Q: What is the difference between TE Connectivity parts 5100141-1 and 5100141-4?
A: Both are Z-PACK series, 125-position, 2.00mm pitch connectors with identical electrical ratings. The difference is contact finish thickness: 5100141-1 has 30.0µin (0.76µm) gold plating, while 5100141-4 has 50.0µin (1.27µm). Additionally, 5100141-4 is ROHS3 Compliant while 5100141-1 is RoHS Compliant.
Q: Are 5100785-1 and 5100785-9 interchangeable?
A: Yes. Both are Z-PACK series parts with identical electrical specifications, temperature range, current rating, voltage rating, and contact finish thickness (30.0µin gold). Both are RoHS Compliant and Active. Selection should be based on packaging availability and inventory.
Q: What is the voltage rating difference between the original part and TE Connectivity substitutes?
A: The HM2P65PCT260N9LF is rated at 750Vrms, while TE Connectivity Z-PACK series substitutes are rated at 500Vrms. For applications requiring 750Vrms operation, the original part or HARTING alternatives should be used.
Q: Can I use 3-100141-0 (Bulk packaging) instead of Tray packaging?
A: Yes, if your assembly process accommodates bulk component handling. 3-100141-0 is electrically and mechanically equivalent to the original part with identical current (1.5A) and voltage (500Vrms) ratings. Verify that your manufacturing equipment and procedures support bulk packaging.
Q: Are all substitute parts currently in production?
A: Yes. All listed substitutes have Active product status and are available in inventory.
Alternative Parts
SJ6012L2TP
Littelfuse Inc.
6 Alternative Parts
JMK107BBJ476MA-RE
Taiyo Yuden
10 Alternative Parts
GMK107BBJ475MA-T
Taiyo Yuden
5 Alternative Parts
SJ6020N2ARP
Littelfuse Inc.
3 Alternative Parts
SJ6025R2ATP
Littelfuse Inc.
4 Alternative Parts
2474-05L
API Delevan Inc.
1 Alternative Parts
4590R-684K
API Delevan Inc.
1 Alternative Parts
CM6560R-334
API Delevan Inc.
1 Alternative Parts
CM6460-104
API Delevan Inc.
1 Alternative Parts
5526-12
API Delevan Inc.
1 Alternative Parts