Request Quote
(Ships tomorrow)
HM2P65PCT260N9 Equivalent & Substitute Parts
Part Overview
The HM2P65PCT260N9 is a 125-position header connector with male pins, manufactured by Amphenol ICC (FCI) in the Millipacs® series. This backplane connector features 0.079" (2.00mm) pitch, through-hole mounting with press-fit termination, and operates across -55°C to 125°C. The part is currently obsolete, making equivalent and substitute parts necessary for ongoing system support and new designs requiring compatible interconnect solutions.
Substiute Parts
Key Parameters
| Parameter | Value |
|---|---|
| Number of Positions | 125 |
| Pitch | 0.079" (2.00mm) |
| Number of Rows | 5 |
| Connector Type | Header, Male Pins |
| Mounting Type | Through Hole |
| Termination | Press-Fit |
| Operating Temperature Range | -55°C ~ 125°C |
| Current Rating | 1.5 A |
| Voltage Rating | 750Vrms |
| Contact Finish | Gold |
| Moisture Sensitivity Level | 1 (Unlimited) |
Substitute Part Grouping Explanation
Substitution eligibility for the HM2P65PCT260N9 is determined by strict alignment of the following parameters:
- Position Count & Pitch: All substitutes must maintain 125 positions at 0.079" (2.00mm) pitch
- Physical Configuration: 5-row arrangement with through-hole mounting and press-fit termination
- Electrical Performance: Current rating of 1.5 A and voltage rating of 750Vrms or higher
- Temperature Range: Operating range of -55°C to 125°C
- Contact System: Gold or gold-palladium finish for compatibility
Substitutes are grouped into two categories:
Category 1: Direct Amphenol ICC Equivalent
- HM2P65PCT260N9LF: Active product with identical electrical and mechanical specifications, differing only in packaging (Tray vs. unspecified) and RoHS compliance status
Category 2: Cross-Manufacturer Alternatives
- HARTING har-bus® HM series (17021251201, 17021252201, 17151251201, 17151252201): Active products with matching position count, pitch, and temperature range; connector style variations (B 25 or AB 25) and current rating of 1 A
- TE Connectivity Z-PACK series (3-100141-0, 5100141-1, 5100141-4, 5100785-1, 5100785-9): Active products with 125 positions, 0.079" pitch, 1.5 A current rating, and 500Vrms voltage rating
Parameter Comparison
| Part Number | Manufacturer | Series | Positions | Pitch | Rows | Current Rating (A) | Voltage Rating | Temperature Range | Contact Finish | Product Status | RoHS Status |
|---|---|---|---|---|---|---|---|---|---|---|---|
| HM2P65PCT260N9 | Amphenol ICC (FCI) | Millipacs® | 125 | 0.079" (2.00mm) | 5 | 1.5 | 750Vrms | -55°C ~ 125°C | Gold | Obsolete | Non-compliant |
| HM2P65PCT260N9LF | Amphenol ICC (FCI) | Millipacs® | 125 | 0.079" (2.00mm) | 5 | 1.5 | 750Vrms | -55°C ~ 125°C | Gold | Active | Compliant |
| 17021251201 | HARTING | har-bus® HM | 125 | 0.079" (2.00mm) | 5 | 1 | — | -55°C ~ 125°C | Gold or Gold-Palladium | Active | ROHS3 Compliant |
| 17021252201 | HARTING | har-bus® HM | 125 | 0.079" (2.00mm) | 5 | 1 | — | -55°C ~ 125°C | Gold or Gold-Palladium | Active | ROHS3 Compliant |
| 17151251201 | HARTING | har-bus® HM | 125 | 0.079" (2.00mm) | 5 | 1 | 150V | -55°C ~ 125°C | Gold or Gold-Palladium | Active | ROHS3 Compliant |
| 17151252201 | HARTING | har-bus® HM | 125 | 0.079" (2.00mm) | 5 | 1 | — | -55°C ~ 125°C | Gold or Gold-Palladium | Active | ROHS3 Compliant |
| 3-100141-0 | TE Connectivity AMP Connectors | Z-PACK | 125 | 0.079" (2.00mm) | 5 | 1.5 | 500Vrms | -55°C ~ 125°C | — | Active | Compliant |
| 5100141-1 | TE Connectivity AMP Connectors | Z-PACK | 125 | 0.079" (2.00mm) | 5 | 1.5 | 500Vrms | -55°C ~ 125°C | Gold | Active | Compliant |
| 5100141-4 | TE Connectivity AMP Connectors | Z-PACK | 125 | 0.079" (2.00mm) | 5 | 1.5 | 500Vrms | -55°C ~ 125°C | Gold | Active | ROHS3 Compliant |
| 5100785-1 | TE Connectivity AMP Connectors | Z-PACK | 125 | 0.079" (2.00mm) | 5 | 1.5 | 500Vrms | -55°C ~ 125°C | Gold | Active | Compliant |
| 5100785-9 | TE Connectivity AMP Connectors | Z-PACK | 125 | 0.079" (2.00mm) | 5 | 1.5 | 500Vrms | -55°C ~ 125°C | Gold | Active | Compliant |
Engineering Selection Recommendations
Primary Recommendation: HM2P65PCT260N9LF
The HM2P65PCT260N9LF is the direct active equivalent from Amphenol ICC (FCI). It maintains identical electrical and mechanical specifications to the obsolete HM2P65PCT260N9, including 1.5 A current rating and 750Vrms voltage rating. This part carries RoHS compliance and REACH affected status, making it suitable for new designs and legacy system replacements where regulatory compliance is required.
Secondary Recommendations: TE Connectivity Z-PACK Series
The TE Connectivity Z-PACK series (5100141-1, 5100141-4, 5100785-1, 5100785-9) provides active alternatives with matching 125-position, 0.079" pitch configuration and 1.5 A current rating. These parts operate at 500Vrms, which is lower than the original 750Vrms specification. Selection from this series depends on application voltage requirements and packaging preferences (Tube or Bulk).
Alternative Consideration: HARTING har-bus® HM Series
The HARTING har-bus® HM series (17021251201, 17021252201, 17151251201, 17151252201) maintains the 125-position, 0.079" pitch, and 5-row configuration with ROHS3 compliance. These parts operate at 1 A current rating, which is lower than the original 1.5 A specification. Selection from this series is appropriate only for applications where the reduced current rating is acceptable.
Frequently Asked Questions (FAQ)
Q: Can HM2P65PCT260N9LF be used as a direct replacement for HM2P65PCT260N9?
A: Yes. HM2P65PCT260N9LF is the active equivalent with identical electrical and mechanical specifications. The primary differences are product status (Active vs. Obsolete) and RoHS compliance (Compliant vs. Non-compliant).
Q: What is the key difference between TE Connectivity Z-PACK substitutes and the original part?
A: TE Connectivity Z-PACK parts maintain the 125-position, 0.079" pitch, and 1.5 A current rating. The voltage rating is 500Vrms compared to the original 750Vrms. Applications operating below 500Vrms can use these parts without electrical limitation.
Q: Why do HARTING har-bus® HM parts have a lower current rating?
A: HARTING har-bus® HM series parts are rated at 1 A, compared to the original 1.5 A. These parts are suitable only for applications where the current requirement does not exceed 1 A.
Q: What packaging options are available for substitutes?
A: HM2P65PCT260N9LF is supplied in Tray packaging. TE Connectivity Z-PACK parts are available in Tube or Bulk packaging. HARTING har-bus® HM parts are supplied in Tube packaging. Packaging selection depends on assembly process requirements and inventory management.
Q: Are all substitute parts RoHS compliant?
A: HM2P65PCT260N9LF, TE Connectivity Z-PACK parts (5100141-4, 5100785-1, 5100785-9), and HARTING har-bus® HM series are RoHS compliant or ROHS3 compliant. The original HM2P65PCT260N9 is RoHS non-compliant.
Q: Can HARTING and TE Connectivity parts be used interchangeably?
A: No. HARTING parts operate at 1 A current rating, while TE Connectivity parts operate at 1.5 A. Selection depends on application current requirements. Additionally, TE Connectivity parts are rated at 500Vrms, while HARTING parts have varying voltage specifications.
Alternative Parts
SJ6012L2TP
Littelfuse Inc.
6 Alternative Parts
JMK107BBJ476MA-RE
Taiyo Yuden
10 Alternative Parts
GMK107BBJ475MA-T
Taiyo Yuden
5 Alternative Parts
SJ6020N2ARP
Littelfuse Inc.
3 Alternative Parts
SJ6025R2ATP
Littelfuse Inc.
4 Alternative Parts
2474-05L
API Delevan Inc.
1 Alternative Parts
4590R-684K
API Delevan Inc.
1 Alternative Parts
CM6560R-334
API Delevan Inc.
1 Alternative Parts
CM6460-104
API Delevan Inc.
1 Alternative Parts
5526-12
API Delevan Inc.
1 Alternative Parts