HM2P09PDG3P9N9 Equivalent & Substitute Parts

Part Overview

The HM2P09PDG3P9N9 is a 66-position (55 + 11 Ground) header connector with male pins, manufactured by Amphenol ICC (FCI) under the Millipacs® series. This through-hole, press-fit connector operates at 0.079" (2.00mm) pitch across 5 + 1 rows with gold-plated contacts rated for 1.5A at 750Vrms across an operating temperature range of -55°C to 125°C.

The HM2P09PDG3P9N9 is classified as obsolete. Locating equivalent or substitute components is necessary to support ongoing maintenance, repair, and production requirements where this connector is specified in existing designs.

Substiute Parts

HM2P09PDG3P9N9

Amphenol ICC (FCI)In Stock: 651HM2P09PDG3P9N9 Datasheet

Current PartRFQ

HM2P09PDG3P9N9LF

Amphenol ICC (FCI)In Stock: 1134HM2P09PDG3P9N9LF Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the HM2P09PDG3P9N9 is determined by strict equivalence across the following critical parameters:

• Connector type, style, and position count (66 positions with 55 + 11 Ground configuration)
• Pitch specification (0.079" / 2.00mm)
• Row configuration (5 + 1)
• Mounting method (Through Hole)
• Termination technology (Press-Fit)
• Electrical ratings (1.5A current, 750Vrms voltage)
• Contact finish specification (Gold plating at 30.0µin)
• Operating temperature range (-55°C to 125°C)
• Series designation (Millipacs®)

The HM2P09PDG3P9N9LF meets all these criteria and is classified as a direct substitute. The primary distinction is product status and packaging configuration.

Parameter Comparison

Engineering Selection Recommendations

The HM2P09PDG3P9N9LF is the direct substitute for the obsolete HM2P09PDG3P9N9. Both components share identical electrical, mechanical, and thermal specifications within the Millipacs® series.

The HM2P09PDG3P9N9LF offers the advantage of active product status, ensuring continued availability and supply chain support. This part is RoHS Compliant and REACH Affected, meeting current environmental and regulatory requirements. The tray packaging of the HM2P09PDG3P9N9LF provides standard handling and storage conditions suitable for production environments.

Selection of the HM2P09PDG3P9N9LF is appropriate for new designs, production restocking, and replacement applications where the original HM2P09PDG3P9N9 is no longer available.

Frequently Asked Questions (FAQ)

Q: Are HM2P09PDG3P9N9 and HM2P09PDG3P9N9LF electrically and mechanically interchangeable?

A: Yes. Both connectors are identical in electrical ratings (1.5A, 750Vrms), mechanical configuration (66 positions, 2.00mm pitch, 5 + 1 rows), contact finish (gold plating), and operating temperature range (-55°C to 125°C). They are direct substitutes.

Q: What is the difference between these two part numbers?

A: The primary differences are product status and packaging. The HM2P09PDG3P9N9 is obsolete, while the HM2P09PDG3P9N9LF is active. The HM2P09PDG3P9N9LF includes RoHS Compliance and REACH Affected status certifications and is supplied in tray packaging.

Q: Can I use HM2P09PDG3P9N9LF in place of HM2P09PDG3P9N9 in existing designs?

A: Yes. The HM2P09PDG3P9N9LF is a direct functional and physical equivalent. No design modifications are required for substitution.

Q: What does the "LF" suffix in HM2P09PDG3P9N9LF indicate?

A: The "LF" suffix typically indicates lead-free or RoHS-compliant processing. The HM2P09PDG3P9N9LF is confirmed as RoHS Compliant.

Q: Are there any packaging considerations when switching from HM2P09PDG3P9N9 to HM2P09PDG3P9N9LF?

A: The HM2P09PDG3P9N9LF is supplied in tray packaging, which is standard for production environments. Verify that your receiving and handling procedures accommodate tray packaging if the original part used different packaging.