HM2P09PDF1G0N9 Equivalent & Substitute Parts

Part Overview

The HM2P09PDF1G0N9 is a 55-position header connector with male pins, manufactured by Amphenol ICC (FCI) as part of the Millipacs® series. This through-hole press-fit connector operates at 0.079" (2.00mm) pitch across 5 rows and is rated for 1.5 A at 750Vrms across an operating temperature range of -55°C to 125°C. The main part is currently obsolete, making identification of compatible alternatives essential for ongoing system support and component procurement.

Substiute Parts

HM2P09PDF1G0N9

Amphenol ICC (FCI)In Stock: 1142HM2P09PDF1G0N9 Datasheet

Current PartRFQ

HM2P09PDF1G0N9LF

Amphenol ICC (FCI)In Stock: 1115HM2P09PDF1G0N9LF Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the HM2P09PDF1G0N9 is determined by strict equivalence across the following critical parameters:

• Connector type and pin configuration (Header, Male Pins, 55 positions)
• Pitch and row configuration (0.079" / 2.00mm, 5 rows)
• Electrical ratings (1.5 A, 750Vrms)
• Mounting and termination method (Through Hole, Press-Fit)
• Operating temperature range (-55°C to 125°C)
• Contact finish specification (Gold, Flash)
• Series designation (Millipacs®)

The HM2P09PDF1G0N9LF meets all these criteria and is classified as a direct substitute. The primary distinction between the main part and its substitute is product status and compliance certification, not electrical or mechanical function.

Parameter Comparison

Engineering Selection Recommendations

The HM2P09PDF1G0N9LF is the direct functional equivalent of the HM2P09PDF1G0N9. Both parts share identical electrical and mechanical specifications, ensuring pin-for-pin compatibility in circuit applications.

Selection between these parts should be based on regulatory and compliance requirements:

• For applications requiring RoHS compliance, the HM2P09PDF1G0N9LF is the appropriate choice, as it meets RoHS standards while the main part does not.
• For applications subject to REACH regulations, the HM2P09PDF1G0N9LF is designated as REACH Affected and provides regulatory alignment.
• The HM2P09PDF1G0N9LF carries Active product status, ensuring ongoing availability and manufacturer support, whereas the main part is Obsolete.
• Both parts are classified under ECCN EAR99 and share the same HTSUS code (8536.69.4040).

Frequently Asked Questions (FAQ)

Q: Can HM2P09PDF1G0N9LF be used as a direct replacement for HM2P09PDF1G0N9?

A: Yes. Both parts are electrically and mechanically identical. They share the same connector type, position count, pitch, current and voltage ratings, operating temperature range, and contact finish. The HM2P09PDF1G0N9LF is the active production equivalent.

Q: What is the difference between these two part numbers?

A: The primary differences are product status, RoHS compliance, and REACH designation. The HM2P09PDF1G0N9 is obsolete and RoHS non-compliant, while the HM2P09PDF1G0N9LF is active production and RoHS compliant. Functionally, they are identical.

Q: Does packaging differ between these parts?

A: Yes. The HM2P09PDF1G0N9LF is supplied in Tray packaging. The packaging specification for the main part is not provided in the technical data.

Q: Are there any electrical or mechanical incompatibilities?

A: No. Both parts operate at identical electrical ratings (1.5 A, 750Vrms), support the same temperature range (-55°C to 125°C), and use identical press-fit termination on through-hole mounting. They are fully interchangeable from a functional standpoint.

Q: Which part should be selected for new designs?

A: The HM2P09PDF1G0N9LF should be selected for new designs. It is the active production part with current compliance certifications and manufacturer support.