HM2P08PKF1K9GF Equivalent & Substitute Parts

Part Overview

The HM2P08PKF1K9GF is a 175-position backplane connector header manufactured by Amphenol ICC (FCI) from the Millipacs® series. This press-fit connector features male pins with 2.00mm pitch and is designed for through-hole mounting applications. The part is currently listed as obsolete, making identification of functional equivalents and active substitutes essential for ongoing system support and new design implementations.

Substiute Parts

HM2P08PKF1K9GF

Amphenol ICC (FCI)In Stock: 1086HM2P08PKF1K9GF Datasheet

Current PartRFQ

HM2P08PKF1K9GFLF

Amphenol ICC (FCI)In Stock: 923HM2P08PKF1K9GFLF Datasheet

DirectRFQ

17011102402

HARTINGIn Stock: 89717011102402 Datasheet

MFR RecommendedRFQ

3-5100143-0

TE Connectivity AMP ConnectorsIn Stock: 10903-5100143-0 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the HM2P08PKF1K9GF is determined by the following critical parameters:

Primary Compatibility Criteria:

• Connector type: Header, Male Pins
• Pitch: 0.079" (2.00mm)
• Mounting type: Through Hole
• Termination method: Press-Fit
• Operating temperature range: -55°C ~ 125°C
• Moisture sensitivity level: 1 (Unlimited)

Identified Substitute Categories:

1. Direct Functional Equivalent (Same Position Count): HM2P08PKF1K9GFLF is an active-status variant of the main part with identical electrical and mechanical specifications, differing only in packaging format (Tray vs. unspecified).

2. Reduced Position Alternatives (110 Positions): Parts 17011102402 (HARTING har-bus® HM series) and 3-5100143-0 (TE Connectivity Z-PACK series) provide 110-position configurations with matching pitch, mounting type, and termination method. These represent functional alternatives for applications where the full 175-position capacity is not required.

Parameter Comparison

Engineering Selection Recommendations

For Direct Replacement (Same Footprint and Position Count):

HM2P08PKF1K9GFLF is the recommended substitute when maintaining identical connector specifications is required. This part is an active-status variant with RoHS compliance and identical electrical and mechanical parameters to the obsolete HM2P08PKF1K9GF. The only difference is packaging format (Tray), which does not affect functional performance.

For Reduced Position Applications (110 Positions):

When system requirements permit operation with 110 positions instead of 175, both 17011102402 and 3-5100143-0 are viable alternatives:

• 3-5100143-0 (TE Connectivity Z-PACK) maintains the full 1.5 A current rating and 500Vrms voltage specification, with RoHS compliance and board guide features.
• 17011102402 (HARTING har-bus® HM) provides ROHS3 compliance and board guide features but operates at 1 A current rating with unspecified voltage rating.

Selection between these alternatives depends on whether the reduced current rating of the HARTING part is acceptable for the application and whether the unspecified voltage rating presents a constraint.

Frequently Asked Questions (FAQ)

Q: Can HM2P08PKF1K9GFLF be used as a direct replacement for HM2P08PKF1K9GF?

A: Yes. HM2P08PKF1K9GFLF is functionally identical to the obsolete HM2P08PKF1K9GF. Both parts share the same electrical specifications (1.5 A, 750Vrms), mechanical configuration (175 positions, 2.00mm pitch, 5+2 rows), and operating temperature range (-55°C ~ 125°C). The difference is packaging format only. HM2P08PKF1K9GFLF is active-status and RoHS compliant.

Q: What is the difference between the 175-position and 110-position alternatives?

A: The main part and HM2P08PKF1K9GFLF both provide 175 positions (125 signal + 50 ground) across 5+2 rows. The HARTING 17011102402 and TE Connectivity 3-5100143-0 provide 110 positions across 5 rows. Selection depends on whether your application requires the full 175-position capacity or can operate with 110 positions.

Q: Are there current rating differences between substitutes?

A: Yes. The main part and HM2P08PKF1K9GFLF are rated at 1.5 A. The TE Connectivity 3-5100143-0 is also rated at 1.5 A. The HARTING 17011102402 is rated at 1 A, which may be limiting for higher-current applications.

Q: What is the voltage rating difference between alternatives?

A: The main part and HM2P08PKF1K9GFLF are rated at 750Vrms. The TE Connectivity 3-5100143-0 is rated at 500Vrms. The HARTING 17011102402 does not specify a voltage rating. Applications requiring 750Vrms operation should use HM2P08PKF1K9GFLF or the main part.

Q: Do all substitutes meet RoHS requirements?

A: HM2P08PKF1K9GFLF is RoHS Compliant. The TE Connectivity 3-5100143-0 is RoHS Compliant. The HARTING 17011102402 is ROHS3 Compliant. All three meet current RoHS standards.

Q: What packaging formats are available?

A: HM2P08PKF1K9GF packaging is unspecified. HM2P08PKF1K9GFLF is supplied in Tray packaging. The HARTING 17011102402 is supplied in Tube packaging. The TE Connectivity 3-5100143-0 is supplied in Tube packaging. Packaging format does not affect electrical or mechanical performance.

Q: Are all substitutes rated for the same operating temperature range?

A: Yes. The main part, HM2P08PKF1K9GFLF, HARTING 17011102402, and TE Connectivity 3-5100143-0 all operate across -55°C ~ 125°C.