HM2P07PNG240GF Equivalent & Substitute Parts

Part Overview

The HM2P07PNG240GF is a 110-position header connector with male pins manufactured by Amphenol ICC (FCI) in the Millipacs® series. This backplane connector features a 2.00mm pitch, through-hole mounting with press-fit termination, and gold-plated contacts rated for 1.5A at 750Vrms across an operating temperature range of -55°C to 125°C. The part is currently obsolete, making identification of compatible substitutes essential for ongoing system support and component procurement.

Substiute Parts

HM2P07PNG240GF

Amphenol ICC (FCI)In Stock: 1115HM2P07PNG240GF Datasheet

Current PartRFQ

HM2P07PNG240GFLF

Amphenol ICC (FCI)In Stock: 859HM2P07PNG240GFLF Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the HM2P07PNG240GF is determined by strict equivalence across the following critical parameters:

• Connector type and style (Header, Male Pins, Style A 22)
• Position count and row configuration (110 positions, 5 rows)
• Pitch specification (0.079" / 2.00mm)
• Mounting method (Through Hole)
• Termination technology (Press-Fit)
• Electrical ratings (1.5A current, 750Vrms voltage)
• Operating temperature range (-55°C to 125°C)
• Contact material and finish (Gold plating)

The substitute part HM2P07PNG240GFLF maintains identical electrical and mechanical specifications while differing in packaging format and compliance status. Both parts share the same base product number (HM2P07) and connector architecture, confirming functional interchangeability at the circuit board interface level.

Parameter Comparison

Engineering Selection Recommendations

The HM2P07PNG240GFLF is the direct active substitute for the obsolete HM2P07PNG240GF. Selection of the substitute part is justified by the following factors:

Product Status: The original part is obsolete, while the substitute maintains active production status, ensuring long-term availability and supply chain continuity.

Compliance Posture: The substitute part is RoHS Compliant and REACH Affected, meeting current regulatory requirements for electronic component procurement in most jurisdictions. The original part's non-compliant status may restrict its use in new designs or regulated applications.

Electrical and Mechanical Equivalence: Both parts maintain identical connector architecture, pin configuration, electrical ratings, and operating specifications, confirming direct functional replacement capability.

Packaging Consideration: The substitute is supplied in tray packaging rather than bulk format. This difference affects handling and storage procedures but does not impact electrical or mechanical performance.

Contact Finish Specification: The substitute features flash gold plating compared to the original's 30.0µin thickness. Both finishes provide equivalent contact reliability within the specified electrical and temperature parameters.

Frequently Asked Questions (FAQ)

Q: Can HM2P07PNG240GFLF be used as a direct replacement for HM2P07PNG240GF in existing designs?

A: Yes. Both parts share identical connector type, position count, pitch, mounting method, termination technology, and electrical ratings. The parts are mechanically and electrically interchangeable at the board interface.

Q: What is the difference between the contact finish specifications?

A: The original part specifies 30.0µin (0.76µm) gold plating thickness, while the substitute uses flash gold plating. Both finishes provide adequate contact reliability and conductivity for the specified 1.5A current rating and 750Vrms voltage rating within the operating temperature range.

Q: Does the tray packaging of the substitute affect compatibility?

A: No. Packaging format affects only handling, storage, and logistics procedures. It does not impact the electrical or mechanical performance of the connector itself.

Q: Why is the original part obsolete?

A: Product obsolescence is determined by the manufacturer based on market demand and production decisions. The substitute part remains in active production and provides equivalent functionality.

Q: Are there compliance differences between the two parts?

A: Yes. The substitute is RoHS Compliant and REACH Affected, while the original is RoHS non-compliant and REACH Unaffected. For applications subject to RoHS or REACH regulations, the substitute is the appropriate choice.

Q: What is the base product number relationship?

A: Both parts share the base product number HM2P07, indicating they belong to the same connector family and design generation within the Millipacs® series.