HM2P07PNF3P5GF Equivalent & Substitute Parts

Part Overview

The HM2P07PNF3P5GF is a 132-position backplane connector header from Amphenol ICC (FCI) within the Millipacs® series. This through-hole press-fit connector features 110 signal positions plus 22 ground positions arranged in a 5+1 row configuration with 0.079" (2.00mm) pitch and integrated board guide. The part is currently obsolete, making identification of compatible substitutes essential for ongoing system support and new design implementations.

Substiute Parts

HM2P07PNF3P5GF

Amphenol ICC (FCI)In Stock: 1258HM2P07PNF3P5GF Datasheet

Current PartRFQ

HM2P07PNF3P5GFLF

Amphenol ICC (FCI)In Stock: 796HM2P07PNF3P5GFLF Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the HM2P07PNF3P5GF is determined by strict equivalence across the following parameters:

• Connector type and style (Header, Male Pins; Style A 22)
• Position count and configuration (132 total: 110 signal + 22 ground)
• Pitch specification (0.079" / 2.00mm)
• Row arrangement (5 + 1)
• Mounting method (Through Hole)
• Termination technology (Press-Fit)
• Operating temperature range (-55°C ~ 125°C)
• Mechanical features (Board Guide)
• Series designation (Millipacs®)

Parts meeting all these criteria are classified as direct functional equivalents. Variations in product status, RoHS compliance, or MSL rating do not affect electrical or mechanical compatibility but may influence procurement and regulatory requirements.

Parameter Comparison

Engineering Selection Recommendations

The HM2P07PNF3P5GFLF is a direct electrical and mechanical equivalent to the HM2P07PNF3P5GF. Both parts share identical connector specifications, pin configuration, pitch, mounting method, and operating temperature range.

The primary distinction is product lifecycle status: the HM2P07PNF3P5GF is obsolete, while the HM2P07PNF3P5GFLF maintains active production status. Additionally, the HM2P07PNF3P5GFLF meets RoHS compliance requirements, whereas the original part does not.

For new designs and ongoing system support, the HM2P07PNF3P5GFLF is the appropriate selection. For legacy systems currently using the HM2P07PNF3P5GF, direct substitution is electrically and mechanically valid.

Frequently Asked Questions (FAQ)

Q: Are HM2P07PNF3P5GF and HM2P07PNF3P5GFLF pin-compatible?

A: Yes. Both connectors feature identical pin counts (132 positions), pitch (0.079" / 2.00mm), row configuration (5 + 1), and male pin termination. Direct board-level substitution is supported without layout modification.

Q: What is the difference between these two part numbers?

A: The HM2P07PNF3P5GFLF incorporates RoHS-compliant materials and maintains active production status. The HM2P07PNF3P5GF is an obsolete variant without RoHS compliance. Electrical and mechanical performance are equivalent.

Q: Can I use HM2P07PNF3P5GFLF in place of HM2P07PNF3P5GF in existing assemblies?

A: Yes. The substitute part meets all electrical and mechanical requirements of the original specification. No circuit design changes or board modifications are required.

Q: Does the RoHS compliance difference affect connector performance?

A: No. RoHS compliance relates to material composition and environmental regulations, not electrical or mechanical function. Both parts operate identically within the specified temperature range (-55°C ~ 125°C).

Q: Are there any packaging or lead-time considerations?

A: Both parts are available from stock. Verify current inventory levels and lead times with your supplier, as availability may fluctuate.