HM2P07PNA2U0GF Equivalent & Substitute Parts

Part Overview

The HM2P07PNA2U0GF is a 110-position header connector with male pins, manufactured by Amphenol ICC (FCI) under the Millipacs® series. This backplane connector features 0.079" (2.00mm) pitch, through-hole press-fit termination, and gold-plated contacts rated for 1.5A at 750Vrms across an operating temperature range of -55°C to 125°C. The part is currently obsolete, necessitating identification of functionally equivalent alternatives from active product lines to maintain design continuity and ensure component availability for new production and field replacements.

Key Parameters

Parameter	Value
Connector Type	Header, Male Pins
Number of Positions	110
Pitch	0.079" (2.00mm)
Number of Rows	5
Connector Style	A 22
Mounting Type	Through Hole
Termination	Press-Fit
Contact Finish	Gold
Current Rating	1.5 A
Voltage Rating	750Vrms
Operating Temperature	-55°C ~ 125°C
Features	Board Guide
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution eligibility for the HM2P07PNA2U0GF is determined by strict equivalence across the following critical parameters:

Connector Type & Style: Header, Male Pins; Connector Style A 22
Position Count & Arrangement: 110 positions across 5 rows
Pitch & Spacing: 0.079" (2.00mm) pitch
Mounting & Termination: Through-hole press-fit configuration
Contact Material & Finish: Gold plating
Electrical Ratings: Current capacity and voltage withstand capability
Environmental Range: Operating temperature -55°C to 125°C
Mechanical Features: Board guide alignment

All identified substitute parts maintain these core parameters. Variations in voltage rating (500Vrms vs. 750Vrms), current rating (1.0A vs. 1.5A), and contact finish thickness do not preclude substitution when the application requirements fall within the substitute part's electrical specifications. Parts from TE Connectivity AMP Connectors (Z-PACK series) and HARTING (har-bus® HM series) meet these criteria and are available in active product status.

Parameter Comparison

Part Number	Manufacturer	Series	Positions	Pitch	Rows	Current (A)	Voltage (Vrms)	Temp Range	Product Status	RoHS Status
HM2P07PNA2U0GF	Amphenol ICC (FCI)	Millipacs®	110	0.079" (2.00mm)	5	1.5	750	-55°C ~ 125°C	Obsolete	Non-compliant
1-5100143-9	TE Connectivity AMP	Z-PACK	110	0.079" (2.00mm)	5	1.5	500	-55°C ~ 125°C	Active	ROHS3 Compliant
1-5188398-9	TE Connectivity AMP	Z-PACK	110	0.079" (2.00mm)	5	1.5	500	-55°C ~ 125°C	Active	ROHS3 Compliant
17011102204	HARTING	har-bus® HM	110	0.079" (2.00mm)	5	1.0	—	-55°C ~ 125°C	Active	ROHS3 Compliant
17011102402	HARTING	har-bus® HM	110	0.079" (2.00mm)	5	1.0	—	-55°C ~ 125°C	Active	ROHS3 Compliant
17011104201	HARTING	har-bus® HM	110	0.079" (2.00mm)	5	1.0	—	-55°C ~ 125°C	Active	ROHS3 Compliant
3-5100143-0	TE Connectivity AMP	Z-PACK	110	0.079" (2.00mm)	5	1.5	500	-55°C ~ 125°C	Active	RoHS Compliant
5100143-1	TE Connectivity AMP	Z-PACK	110	0.079" (2.00mm)	5	1.5	500	-55°C ~ 125°C	Active	ROHS3 Compliant
5106164-1	TE Connectivity AMP	Z-PACK	110	0.079" (2.00mm)	5	1.5	500	-55°C ~ 125°C	Active	ROHS3 Compliant
5106413-1	TE Connectivity AMP	Z-PACK	110	0.079" (2.00mm)	5	1.5	500	-55°C ~ 125°C	Active	ROHS3 Compliant
5188398-9	TE Connectivity AMP	Z-PACK	110	0.079" (2.00mm)	5	1.5	500	-55°C ~ 125°C	Active	RoHS Compliant

Engineering Selection Recommendations

Primary Substitutes (Highest Compatibility)

The TE Connectivity AMP Connectors Z-PACK series parts (5100143-1, 5106413-1, 5188398-9, 1-5188398-9, 1-5100143-9, 3-5100143-0, 5106164-1) are direct functional equivalents. These parts maintain the 110-position, 2.00mm pitch, 5-row configuration with identical mounting and termination methods. All are ROHS3 compliant or RoHS compliant, addressing regulatory requirements that the original obsolete part does not meet. Current rating remains at 1.5A, matching the original specification. Voltage rating is reduced to 500Vrms; this substitution is valid for applications where the system voltage does not exceed 500Vrms.

Secondary Substitutes (Current Rating Consideration)

HARTING har-bus® HM series parts (17011102204, 17011102402, 17011104201) maintain mechanical and thermal compatibility but specify a 1.0A current rating versus the original 1.5A. These parts are suitable for applications where circuit current requirements do not exceed 1.0A. All HARTING parts are ROHS3 compliant and active in production.

Compliance & Availability

All substitute parts carry ROHS3 compliance or RoHS compliance status, eliminating the non-compliance issue of the obsolete original part. Inventory levels across substitute options range from 725 to 3040 pieces, ensuring supply continuity. Selection should prioritize parts with ROHS3 Compliant designation for new designs requiring the highest regulatory alignment.

Frequently Asked Questions (FAQ)

Q: Can I use a substitute part with a lower voltage rating (500Vrms vs. 750Vrms)?

A: Yes, if your application operates at or below 500Vrms. The substitute parts are rated for 500Vrms continuous operation. Verify your system voltage specification before selection.

Q: Are HARTING parts with 1.0A rating suitable for my application?

A: HARTING substitutes are suitable only if your circuit current does not exceed 1.0A. If your design requires 1.5A capability, select TE Connectivity AMP parts (5100143-1, 5106413-1, 5188398-9, or equivalent variants).

Q: What is the difference between the multiple TE Connectivity part numbers?

A: All listed TE Connectivity Z-PACK variants (5100143-1, 5106413-1, 5188398-9, 1-5188398-9, 1-5100143-9, 3-5100143-0, 5106164-1) share identical electrical and mechanical specifications. Differences exist in base product numbering and internal manufacturing variants. 5106164-1 includes an alignment strip feature in addition to the board guide. Selection can be based on availability and packaging preference (all supplied in tube packaging).

Q: Is RoHS compliance mandatory for my substitution?

A: RoHS compliance is mandatory for products sold into European Union markets and many other regulated regions. All substitute parts listed carry RoHS or ROHS3 compliance, addressing this requirement. The original HM2P07PNA2U0GF is RoHS non-compliant and cannot be used in new designs subject to RoHS regulations.

Q: Will the substitute connectors fit my existing PCB layout?

A: Yes. All substitute parts maintain the 0.079" (2.00mm) pitch, 110-position configuration across 5 rows with identical through-hole press-fit termination. PCB footprints designed for the original part are compatible with all listed substitutes.

Q: What is the contact finish thickness difference, and does it matter?

A: The original part specifies 30.0µin (0.76µm) gold plating. Most TE Connectivity substitutes also specify this thickness. HARTING parts do not specify thickness but indicate gold or gold-palladium finish. For applications requiring specific contact resistance or wear characteristics, verify finish thickness with the manufacturer if not listed.

Q: Can I mix substitute parts from different manufacturers in the same design?

A: Mechanically and electrically, yes. All parts are functionally equivalent within their rated specifications. However, for consistency in procurement, testing, and field replacement, it is preferable to standardize on a single part number per design.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message