HM2P07PMF2R7GF Equivalent & Substitute Parts

Part Overview

The HM2P07PMF2R7GF is a 154-position backplane connector header manufactured by Amphenol ICC (FCI) in the Millipacs® series. This through-hole press-fit connector features a 2.00mm pitch and supports 1.5A current at 750Vrms. The part is currently obsolete, making equivalent substitutes necessary for ongoing system support and new designs requiring compatible backplane connectivity.

Key Parameters

Parameter	Value
Connector Type	Header, Male Pins
Number of Positions	154 (110 + 44 Ground)
Pitch	0.079" (2.00mm)
Number of Rows	5 + 2
Mounting Type	Through Hole
Termination	Press-Fit
Current Rating	1.5 A
Voltage Rating	750Vrms
Operating Temperature	-55°C ~ 125°C
Contact Finish	Gold

Substitute Part Grouping Explanation

Substitution for the HM2P07PMF2R7GF is determined by the following critical parameters:

Pitch (2.00mm): All substitutes maintain identical 2.00mm spacing for PCB compatibility
Mounting Type (Through Hole, Press-Fit): All substitutes use press-fit termination for direct board mounting
Connector Style (A 22): Mechanical and electrical interface compatibility
Operating Temperature Range (-55°C ~ 125°C): All substitutes support the full temperature range
Contact Finish (Gold): All substitutes provide gold plating for reliable electrical contact

Substitutes are grouped into two categories based on position count:

Category 1: 154-Position Equivalents – Direct functional replacement with identical position count and ground configuration (110 + 44 Ground positions across 5 + 2 rows).

Category 2: 110-Position Alternatives – Reduced position count (110 positions across 5 rows) for applications requiring fewer signal connections. These parts maintain core electrical and mechanical compatibility but differ in position configuration.

Parameter Comparison

Part Number	Manufacturer	Positions	Rows	Pitch	Current Rating	Voltage Rating	Temp Range	Product Status	RoHS Status
HM2P07PMF2R7GF	Amphenol ICC (FCI)	154 (110+44G)	5+2	2.00mm	1.5 A	750Vrms	-55°C ~ 125°C	Obsolete	Non-compliant
HM2P07PMF2R7GFLF	Amphenol ICC (FCI)	154 (110+44G)	5+2	2.00mm	1.5 A	750Vrms	-55°C ~ 125°C	Active	Compliant
1-5100143-9	TE Connectivity AMP	110	5	2.00mm	1.5 A	500Vrms	-55°C ~ 125°C	Active	ROHS3 Compliant
1-5188398-9	TE Connectivity AMP	110	5	2.00mm	1.5 A	500Vrms	-55°C ~ 125°C	Active	ROHS3 Compliant
17011102204	HARTING	110	5	2.00mm	1 A	—	-55°C ~ 125°C	Active	ROHS3 Compliant
17011104201	HARTING	110	5	2.00mm	1 A	—	-55°C ~ 125°C	Active	ROHS3 Compliant
3-5100143-0	TE Connectivity AMP	110	5	2.00mm	1.5 A	500Vrms	-55°C ~ 125°C	Active	RoHS Compliant
5100143-1	TE Connectivity AMP	110	5	2.00mm	1.5 A	500Vrms	-55°C ~ 125°C	Active	ROHS3 Compliant
5106164-1	TE Connectivity AMP	110	5	2.00mm	1.5 A	500Vrms	-55°C ~ 125°C	Active	ROHS3 Compliant
5106413-1	TE Connectivity AMP	110	5	2.00mm	1.5 A	500Vrms	-55°C ~ 125°C	Active	ROHS3 Compliant
5188398-9	TE Connectivity AMP	110	5	2.00mm	1.5 A	500Vrms	-55°C ~ 125°C	Active	RoHS Compliant

Engineering Selection Recommendations

Direct 154-Position Replacement:

HM2P07PMF2R7GFLF is the primary equivalent for HM2P07PMF2R7GF. Both parts maintain identical electrical and mechanical specifications with 154 positions (110 + 44 Ground) across 5 + 2 rows. The substitute is active in production status and RoHS compliant, addressing the obsolescence of the original part while maintaining full functional compatibility.

110-Position Alternatives:

For applications where 110-position connectivity is sufficient, TE Connectivity AMP Z-PACK series (1-5100143-9, 1-5188398-9, 3-5100143-0, 5100143-1, 5106164-1, 5106413-1, 5188398-9) and HARTING har-bus® HM series (17011102204, 17011104201) provide active alternatives. These parts support the same 2.00mm pitch and through-hole press-fit mounting with operating temperature range of -55°C ~ 125°C. TE Connectivity parts maintain 1.5A current rating at 500Vrms. HARTING parts support 1A current rating. All 110-position alternatives are ROHS3 compliant and in active production status.

Frequently Asked Questions (FAQ)

Q: Can HM2P07PMF2R7GFLF directly replace HM2P07PMF2R7GF?

A: Yes. HM2P07PMF2R7GFLF is a direct equivalent with identical position count (154), pitch (2.00mm), current rating (1.5A), voltage rating (750Vrms), and operating temperature range (-55°C ~ 125°C). The primary difference is product status (active vs. obsolete) and RoHS compliance.

Q: What is the difference between 154-position and 110-position substitutes?

A: The original HM2P07PMF2R7GF provides 154 total positions (110 signal + 44 ground) across 5 + 2 rows. The 110-position alternatives provide 110 positions across 5 rows. Selection depends on the number of signal connections required by the application. PCB layout and connector footprint will differ between these configurations.

Q: Are HARTING 17011102204 and 17011104201 compatible with the original part?

A: Both HARTING parts maintain 2.00mm pitch, through-hole press-fit mounting, and -55°C ~ 125°C operating temperature. However, they support 1A current rating compared to the original 1.5A specification. Voltage rating is not specified for HARTING parts. Selection requires confirmation that 1A current capacity is sufficient for the application.

Q: What is the significance of RoHS compliance in substitute selection?

A: The original HM2P07PMF2R7GF is RoHS non-compliant. All active substitutes listed are RoHS compliant or ROHS3 compliant, meeting current environmental and regulatory requirements for new designs and manufacturing.

Q: Do all substitutes use the same press-fit termination?

A: Yes. All listed substitutes use press-fit termination for direct PCB mounting, maintaining compatibility with existing board designs that accommodate this termination method.

Q: What packaging options are available?

A: HM2P07PMF2R7GFLF is supplied in Tray packaging. TE Connectivity and HARTING alternatives are supplied in Tube packaging. Packaging selection may affect handling, storage, and integration into assembly processes.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message