HM2P07PKP2H5GF Equivalent & Substitute Parts

Part Overview

The HM2P07PKP2H5GF is a 132-position (110 + 22 ground) header connector manufactured by Amphenol ICC (FCI) from the Millipacs® series. This through-hole, press-fit connector operates at 0.079" (2.00mm) pitch with a 5+1 row configuration and supports 1.5A current at 750Vrms. The part is currently obsolete, necessitating identification of functionally equivalent alternatives for ongoing system support and new designs.

Key Parameters

Parameter	Value
Connector Type	Header, Male Pins
Number of Positions	132 (110 + 22 Ground)
Pitch	0.079" (2.00mm)
Number of Rows	5 + 1
Mounting Type	Through Hole
Termination	Press-Fit
Current Rating	1.5 A
Voltage Rating	750Vrms
Operating Temperature	-55°C ~ 125°C
Contact Finish	Gold
Features	Board Guide

Substitute Part Grouping Explanation

Substitution logic is based on the following critical parameters:

Primary Compatibility Criteria:

Pitch: 0.079" (2.00mm) — determines PCB footprint compatibility
Connector Type: Header, Male Pins — maintains interface consistency
Mounting Type: Through Hole — ensures mechanical fit
Termination: Press-Fit — preserves assembly process compatibility
Operating Temperature: -55°C ~ 125°C — defines thermal envelope
Contact Finish: Gold — ensures electrical performance

Position Configuration Consideration: The original part features 132 positions (110 + 22 ground). Substitute parts in this list are primarily 110-position connectors without dedicated ground rows. These substitutes maintain electrical and mechanical compatibility for applications where the 110-position configuration is acceptable.

Voltage and Current Derating: The original part supports 750Vrms at 1.5A. Substitute parts from TE Connectivity and HARTING support 500Vrms at 1.5A (or 1A for HARTING), representing a voltage derating that must be evaluated against application requirements.

Parameter Comparison

Part Number	Manufacturer	Positions	Pitch	Rows	Current (A)	Voltage (Vrms)	Temp Range (°C)	Contact Finish	Product Status	RoHS Status
HM2P07PKP2H5GF	Amphenol ICC (FCI)	132 (110+22)	0.079" (2.00mm)	5+1	1.5	750	-55 ~ 125	Gold	Obsolete	Non-compliant
HM2P07PKP2H5GFLF	Amphenol ICC (FCI)	132 (110+22)	0.079" (2.00mm)	5+1	1.5	750	-55 ~ 125	Gold	Active	Compliant
1-5100143-9	TE Connectivity AMP	110	0.079" (2.00mm)	5	1.5	500	-55 ~ 125	Gold	Active	Compliant
1-5188398-9	TE Connectivity AMP	110	0.079" (2.00mm)	5	1.5	500	-55 ~ 125	Gold	Active	Compliant
17011102402	HARTING	110	0.079" (2.00mm)	5	1.0	—	-55 ~ 125	Gold or Gold-Palladium	Active	Compliant
3-5100143-0	TE Connectivity AMP	110	0.079" (2.00mm)	5	1.5	500	-55 ~ 125	Gold	Active	Compliant
5100143-1	TE Connectivity AMP	110	0.079" (2.00mm)	5	1.5	500	-55 ~ 125	Gold	Active	Compliant
5106164-1	TE Connectivity AMP	110	0.079" (2.00mm)	5	1.5	500	-55 ~ 125	Gold	Active	Compliant
5106413-1	TE Connectivity AMP	110	0.079" (2.00mm)	5	1.5	500	-55 ~ 125	Gold	Active	Compliant
5188398-9	TE Connectivity AMP	110	0.079" (2.00mm)	5	1.5	500	-55 ~ 125	Gold	Active	Compliant
5188731-1	TE Connectivity AMP	110	0.079" (2.00mm)	5	1.5	500	-55 ~ 125	Gold	Active	Compliant

Engineering Selection Recommendations

Direct Replacement (Preferred): HM2P07PKP2H5GFLF is the direct successor to HM2P07PKP2H5GF. Both are Amphenol ICC Millipacs® connectors with identical electrical and mechanical specifications (132 positions, 750Vrms, 1.5A). The primary difference is product status (active vs. obsolete) and RoHS compliance (compliant vs. non-compliant). This part maintains full compatibility with existing PCB designs and assembly processes.

Alternative Substitutes (110-Position Configuration): TE Connectivity Z-PACK series (1-5100143-9, 1-5188398-9, 3-5100143-0, 5100143-1, 5106164-1, 5106413-1, 5188398-9, 5188731-1) and HARTING har-bus® HM (17011102402) are functionally equivalent for applications where 110-position configuration is acceptable. These parts share identical pitch (0.079"), mounting type (through-hole), termination (press-fit), and operating temperature range. All are active products with current RoHS compliance.

Voltage Derating Consideration: TE Connectivity and HARTING substitutes operate at 500Vrms maximum (or unspecified for HARTING), compared to the original 750Vrms rating. Applications requiring the full 750Vrms rating must use HM2P07PKP2H5GFLF.

Current Rating Consideration: HARTING 17011102402 supports 1.0A maximum current, compared to 1.5A for all other alternatives. Applications requiring 1.5A should exclude this part.

Frequently Asked Questions (FAQ)

Q: Can I use a 110-position connector to replace the 132-position original part? A: Yes, if your application design accommodates the 110-position configuration. The 110-position substitutes maintain identical pitch, mounting, and termination characteristics. However, PCB layout modifications may be required if the original design utilized all 132 positions.

Q: What is the primary difference between HM2P07PKP2H5GF and HM2P07PKP2H5GFLF? A: HM2P07PKP2H5GFLF is the active production equivalent with RoHS compliance. Both parts are electrically and mechanically identical (132 positions, 750Vrms, 1.5A, 0.079" pitch). The "LF" suffix indicates lead-free termination and RoHS compliance.

Q: Are TE Connectivity Z-PACK connectors fully compatible with Amphenol ICC Millipacs® designs? A: Mechanical and electrical compatibility is maintained for pitch (0.079"), connector type (header, male pins), mounting (through-hole), and termination (press-fit). However, voltage rating is reduced from 750Vrms to 500Vrms. PCB footprint compatibility depends on position count alignment (110 vs. 132 positions).

Q: Why do some substitutes show lower voltage ratings? A: TE Connectivity Z-PACK series and HARTING har-bus® HM are designed for different application classes. The 500Vrms rating is sufficient for standard backplane applications. Applications requiring 750Vrms must use HM2P07PKP2H5GFLF.

Q: What packaging options are available? A: HM2P07PKP2H5GFLF is supplied in Tray packaging. TE Connectivity and HARTING substitutes are supplied in Tube packaging. Packaging selection may affect procurement lead times and handling requirements.

Q: Is HARTING 17011102402 suitable for high-current applications? A: No. HARTING 17011102402 supports maximum 1.0A current, compared to 1.5A for all other alternatives. Applications requiring 1.5A current capacity should use TE Connectivity or Amphenol ICC parts.

Q: What is the MSL (Moisture Sensitivity Level) for these connectors? A: All parts listed carry MSL 1 (Unlimited), indicating no moisture sensitivity restrictions during storage or handling.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message