HM2P07PKE180GF Equivalent & Substitute Parts

Part Overview

The HM2P07PKE180GF is a 110-position backplane connector header manufactured by Amphenol ICC (FCI) from the Millipacs® series. This through-hole press-fit connector features a 2.00mm pitch and is designed for high-density interconnect applications. The part is currently listed as obsolete, making equivalent and substitute parts necessary for ongoing system support and new design implementations. Substitute parts maintain the core electrical and mechanical specifications while offering improved availability and compliance status.

Key Parameters

Parameter	Value
Number of Positions	110
Pitch	0.079" (2.00mm)
Number of Rows	5
Connector Type	Header, Male Pins
Connector Style	A 22
Mounting Type	Through Hole
Termination	Press-Fit
Contact Finish	Gold
Operating Temperature Range	-55°C ~ 125°C
Features	Board Guide

Substitute Part Grouping Explanation

Substitution eligibility for the HM2P07PKE180GF is determined by strict adherence to the following parameters:

Position Count & Pitch: All substitutes must maintain 110 positions at 0.079" (2.00mm) pitch
Physical Configuration: 5-row arrangement with Type A 22 connector style
Mounting & Termination: Through-hole press-fit mounting only
Electrical Ratings: Current rating of 1.0 A minimum; voltage rating of 500Vrms minimum
Operating Environment: Temperature range of -55°C ~ 125°C
Connector Features: Board guide requirement

The three qualified substitutes meet these criteria while offering different compliance profiles and availability statuses.

Parameter Comparison

Parameter	HM2P07PKE180GF	HM2P07PKE180GFLF	17011102402	3-5100143-0
Manufacturer	Amphenol ICC (FCI)	Amphenol ICC (FCI)	HARTING	TE Connectivity AMP
Series	Millipacs®	Millipacs®	har-bus® HM	Z-PACK
Product Status	Obsolete	Active	Active	Active
Number of Positions	110	110	110	110
Pitch	0.079" (2.00mm)	0.079" (2.00mm)	0.079" (2.00mm)	0.079" (2.00mm)
Number of Rows	5	5	5	5
Connector Type	Header, Male Pins	Header, Male Pins	Header, Male Pins	Header, Male Pins
Connector Style	A 22	A 22	A 22	A 22
Mounting Type	Through Hole	Through Hole	Through Hole	Through Hole
Termination	Press-Fit	Press-Fit	Press-Fit	Press-Fit
Contact Finish	Gold	Gold	Gold or Gold-Palladium	Gold
Contact Finish Thickness	30.0µin (0.76µm)	30.0µin (0.76µm)	Not specified	30.0µin (0.76µm)
Current Rating (Amps)	1.5 A	1.5 A	1.0 A	1.5 A
Voltage Rating	750Vrms	750Vrms	Not specified	500Vrms
Operating Temperature	-55°C ~ 125°C	-55°C ~ 125°C	-55°C ~ 125°C	-55°C ~ 125°C
Features	Board Guide	Board Guide	Board Guide	Board Guide
RoHS Status	RoHS non-compliant	RoHS Compliant	ROHS3 Compliant	RoHS Compliant
Packaging	Not specified	Tray	Tube	Tube
Inventory Status	1076 Pcs	695 Pcs	885 Pcs	1050 Pcs

Engineering Selection Recommendations

HM2P07PKE180GFLF (Amphenol ICC - Direct Manufacturer Upgrade)

This part represents the direct evolution from the obsolete HM2P07PKE180GF within the same manufacturer's product line. It maintains identical electrical and mechanical specifications while achieving RoHS compliance and active product status. Selection of this part is appropriate for applications requiring continuity within the Millipacs® series and where tray packaging is acceptable.

17011102402 (HARTING - Cross-Manufacturer Alternative)

This HARTING har-bus® HM series connector provides a functionally equivalent solution from an established alternative manufacturer. The part meets all core substitution criteria with ROHS3 compliance. The current rating of 1.0 A is lower than the original specification; this part is suitable for applications where the 1.0 A rating is sufficient. Tube packaging is standard for this part.

3-5100143-0 (TE Connectivity - Premium Alternative)

This TE Connectivity Z-PACK series connector maintains the highest electrical compatibility with the original part, matching the 1.5 A current rating and providing RoHS compliance. The voltage rating of 500Vrms is lower than the original 750Vrms specification; this part is suitable for applications operating within 500Vrms limits. Tube packaging is provided.

Frequently Asked Questions (FAQ)

Q: Can I use 17011102402 in place of HM2P07PKE180GF if my application requires 1.5 A?

A: No. The 17011102402 is rated for 1.0 A maximum current, which is below the 1.5 A requirement. Use either HM2P07PKE180GFLF or 3-5100143-0 for 1.5 A applications.

Q: What is the difference between the three substitute parts?

A: All three maintain the 110-position, 2.00mm pitch, 5-row configuration. HM2P07PKE180GFLF is the direct manufacturer upgrade from Amphenol ICC. 17011102402 is a HARTING alternative with 1.0 A rating. 3-5100143-0 is a TE Connectivity alternative with 500Vrms voltage rating. All are active products with RoHS compliance.

Q: Does packaging type affect electrical performance?

A: No. Packaging (tray vs. tube) affects handling, storage, and logistics only. Electrical and mechanical performance is identical regardless of packaging format.

Q: Is the HM2P07PKE180GF still available?

A: The HM2P07PKE180GF is listed as obsolete. Current inventory of 1076 pieces may be available through authorized distributors, but long-term availability is not guaranteed. Transition to an active substitute part is recommended for new designs and ongoing production.

Q: Can I mix substitute parts in the same assembly?

A: Yes, provided your application requirements fall within the specifications of all parts being used. For applications requiring 1.5 A, use only HM2P07PKE180GFLF or 3-5100143-0. Do not mix with 17011102402 in current-critical circuits.

Q: What does RoHS compliance mean for this connector?

A: RoHS compliance indicates the part meets restrictions on hazardous substances. HM2P07PKE180GFLF and 3-5100143-0 are RoHS compliant; the original HM2P07PKE180GF is not. This is relevant for applications subject to RoHS regulations.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message