HM2P07PK511CGF Equivalent & Substitute Parts

Part Overview

The HM2P07PK511CGF is a 132-position header connector manufactured by Amphenol ICC (FCI) from the Millipacs® series. This press-fit through-hole connector features 110 signal positions plus 22 ground positions with 0.079" (2.00mm) pitch and gold-plated contacts rated for 1.5A at 750Vrms. The part is currently listed as obsolete, making substitute components necessary for ongoing system support and new designs requiring equivalent functionality.

Substiute Parts

HM2P07PK511CGF

Amphenol ICC (FCI)In Stock: 1194HM2P07PK511CGF Datasheet

Current PartRFQ

HM2P07PK511CGFLF

Amphenol ICC (FCI)In Stock: 752HM2P07PK511CGFLF Datasheet

DirectRFQ

17011102402

HARTINGIn Stock: 89717011102402 Datasheet

MFR RecommendedRFQ

3-5100143-0

TE Connectivity AMP ConnectorsIn Stock: 10903-5100143-0 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility is determined by the following critical parameters: connector type (header, male pins), pitch (0.079" / 2.00mm), mounting method (through-hole press-fit), operating temperature range (-55°C to 125°C), contact finish (gold), and presence of board guide feature. Position count and row configuration are secondary considerations when electrical and mechanical interfaces remain compatible.

The substitute parts are grouped into two categories:

Direct Equivalent (Same Position Count): HM2P07PK511CGFLF maintains identical electrical and mechanical specifications as the main part, differing only in packaging format and product status.

Functional Equivalents (Reduced Position Count): Parts 17011102402 (HARTING) and 3-5100143-0 (TE Connectivity) provide 110-position configurations without dedicated ground rows. These are suitable for applications where the full 132-position capacity is not required, provided the signal and ground distribution can be accommodated within the reduced position count.

Parameter Comparison

Engineering Selection Recommendations

For Direct Replacement: HM2P07PK511CGFLF is the primary substitute, offering identical electrical and mechanical specifications while maintaining active product status and RoHS compliance. This part is suitable for applications requiring the full 132-position configuration with dedicated ground rows.

For Reduced Position Applications: Parts 17011102402 and 3-5100143-0 are applicable only when system design can accommodate 110-position headers without separate ground row structures. The 17011102402 (HARTING) operates at 1.0A maximum current, which is lower than the original specification. The 3-5100143-0 (TE Connectivity) maintains 1.5A current rating but specifies 500Vrms voltage, which is lower than the original 750Vrms rating.

Selection should prioritize HM2P07PK511CGFLF for direct compatibility. Alternative manufacturers should be evaluated only when position count reduction is acceptable and electrical parameter derating is compatible with application requirements.

Frequently Asked Questions (FAQ)

Q: Can HM2P07PK511CGFLF be used as a direct replacement for HM2P07PK511CGF?

A: Yes. Both parts share identical connector type, position count (132), pitch (2.00mm), mounting method (through-hole press-fit), current rating (1.5A), voltage rating (750Vrms), operating temperature range (-55°C to 125°C), and board guide feature. The difference is packaging format and product status; HM2P07PK511CGFLF is active and RoHS compliant.

Q: What is the key difference between the 132-position and 110-position substitutes?

A: The main part includes 22 dedicated ground positions in addition to 110 signal positions, organized in 5 signal rows plus 1 ground row. The 110-position alternatives (17011102402 and 3-5100143-0) contain only signal positions without a separate ground row structure. Ground distribution must be managed within the 110-position allocation.

Q: Are there electrical parameter differences between the main part and the 110-position substitutes?

A: Yes. The HARTING 17011102402 is rated for 1.0A maximum current versus the original 1.5A. The TE Connectivity 3-5100143-0 maintains 1.5A current rating but specifies 500Vrms voltage versus the original 750Vrms. These deratings must be evaluated against application requirements.

Q: What packaging formats are available for the substitute parts?

A: HM2P07PK511CGFLF is supplied in Tray packaging. The HARTING 17011102402 and TE Connectivity 3-5100143-0 are supplied in Tube packaging. Packaging selection may affect handling, storage, and assembly processes.

Q: Are all substitute parts RoHS compliant?

A: HM2P07PK511CGFLF is RoHS Compliant. The HARTING 17011102402 is ROHS3 Compliant. The TE Connectivity 3-5100143-0 is RoHS Compliant. All meet current regulatory requirements.