HM2P07PDW2M0N9 110-Position 2mm Press-Fit Backplane Connector

Part Overview

The HM2P07PDW2M0N9 is a 110-position header connector with male pins, 2mm pitch, and press-fit termination manufactured by Amphenol ICC (FCI) in the Millipacs® series. This connector is designed for backplane applications requiring through-hole mounting with board guide features. The part is currently obsolete, necessitating identification of active equivalent and substitute components that maintain electrical and mechanical compatibility for new designs or production continuity.

Key Parameters

Parameter	Value
Connector Type	Header, Male Pins
Number of Positions	110
Pitch	0.079" (2.00mm)
Number of Rows	5
Mounting Type	Through Hole
Termination	Press-Fit
Contact Finish	Gold
Current Rating	1.5 A
Voltage Rating	500–750Vrms
Operating Temperature	-55°C to 125°C
Features	Board Guide
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution eligibility for the HM2P07PDW2M0N9 is determined by strict equivalence across the following parameters:

Connector Type & Style: Header, Male Pins; Connector Style A 22
Position Count & Pitch: 110 positions at 0.079" (2.00mm) spacing
Row Configuration: 5 rows
Mounting & Termination: Through-hole press-fit
Electrical Ratings: Current rating of 1.5 A minimum; voltage rating of 500Vrms minimum
Operating Temperature Range: -55°C to 125°C
Contact Finish: Gold plating
Board Guide Feature: Required

Substitute parts are grouped into two categories:

Category 1: Direct Amphenol ICC (FCI) Equivalent

HM2P07PDW2M0N9LF: Active status variant with RoHS compliance and tray packaging

Category 2: Cross-Manufacturer Equivalents

TE Connectivity AMP Connectors Z-PACK series: 1-5100143-9, 1-5188398-9, 3-5100143-0, 5100143-1, 5106164-1, 5106413-1
HARTING har-bus® HM series: 17011102204, 17011102402, 17011104201

All substitute parts maintain the core electrical and mechanical specifications required for direct replacement in backplane connector applications.

Parameter Comparison

Part Number	Manufacturer	Series	Positions	Pitch	Rows	Current (A)	Voltage (Vrms)	Temp Range (°C)	Product Status	RoHS Status
HM2P07PDW2M0N9	Amphenol ICC (FCI)	Millipacs®	110	2.00mm	5	1.5	750	-55 to 125	Obsolete	Non-compliant
HM2P07PDW2M0N9LF	Amphenol ICC (FCI)	Millipacs®	110	2.00mm	5	1.5	750	-55 to 125	Active	Compliant
1-5100143-9	TE Connectivity AMP	Z-PACK	110	2.00mm	5	1.5	500	-55 to 125	Active	ROHS3 Compliant
1-5188398-9	TE Connectivity AMP	Z-PACK	110	2.00mm	5	1.5	500	-55 to 125	Active	ROHS3 Compliant
3-5100143-0	TE Connectivity AMP	Z-PACK	110	2.00mm	5	1.5	500	-55 to 125	Active	RoHS Compliant
5100143-1	TE Connectivity AMP	Z-PACK	110	2.00mm	5	1.5	500	-55 to 125	Active	ROHS3 Compliant
5106164-1	TE Connectivity AMP	Z-PACK	110	2.00mm	5	1.5	500	-55 to 125	Active	ROHS3 Compliant
5106413-1	TE Connectivity AMP	Z-PACK	110	2.00mm	5	1.5	500	-55 to 125	Active	ROHS3 Compliant
17011102204	HARTING	har-bus® HM	110	2.00mm	5	1.0	—	-55 to 125	Active	ROHS3 Compliant
17011102402	HARTING	har-bus® HM	110	2.00mm	5	1.0	—	-55 to 125	Active	ROHS3 Compliant
17011104201	HARTING	har-bus® HM	110	2.00mm	5	1.0	—	-55 to 125	Active	ROHS3 Compliant

Engineering Selection Recommendations

Primary Recommendation: HM2P07PDW2M0N9LF This is the direct active equivalent from Amphenol ICC (FCI), maintaining identical electrical and mechanical specifications while achieving RoHS compliance. It is the preferred choice for design continuity and supply chain consistency.

Secondary Recommendation: TE Connectivity AMP Z-PACK Series (5100143-1, 5106413-1, 5106164-1) These parts provide full electrical compatibility with 1.5 A current rating and 500Vrms voltage rating. All variants are ROHS3 compliant and actively produced. The 5106164-1 includes an alignment strip feature in addition to the board guide. These are suitable for applications where cross-manufacturer sourcing is acceptable.

Alternative Recommendation: TE Connectivity AMP Z-PACK Series (1-5100143-9, 1-5188398-9, 3-5100143-0) These variants maintain the same electrical specifications and RoHS compliance status. Selection among these options depends on packaging requirements (tube) and specific REACH compliance documentation needs.

Conditional Recommendation: HARTING har-bus® HM Series (17011102204, 17011102402, 17011104201) These connectors maintain mechanical and thermal compatibility but operate at a reduced current rating of 1.0 A compared to the original 1.5 A specification. Use only in applications where the lower current rating is acceptable. All variants are ROHS3 compliant and actively produced.

Frequently Asked Questions (FAQ)

Q: Can HM2P07PDW2M0N9LF be used as a direct replacement for HM2P07PDW2M0N9? A: Yes. HM2P07PDW2M0N9LF is the active equivalent from the same manufacturer with identical electrical and mechanical specifications. The primary difference is RoHS compliance status and active production status.

Q: What is the key difference between TE Connectivity and HARTING substitutes? A: TE Connectivity Z-PACK series maintains the 1.5 A current rating of the original part. HARTING har-bus® HM series operates at 1.0 A. Select based on your application's current requirements.

Q: Are voltage ratings equivalent across all substitutes? A: TE Connectivity parts are rated at 500Vrms, which is lower than the original 750Vrms specification. HARTING parts do not specify a voltage rating in the provided data. Confirm voltage requirements for your application before selection.

Q: Does packaging affect electrical performance? A: No. Packaging differences (tray, tube) do not affect connector performance. Selection should be based on your procurement and assembly process requirements.

Q: Are all substitute parts RoHS compliant? A: The original HM2P07PDW2M0N9 is RoHS non-compliant. All listed substitutes are RoHS compliant (either RoHS or ROHS3 status), making them suitable for applications requiring regulatory compliance.

Q: Can I mix substitute parts from different manufacturers in the same design? A: All listed substitutes maintain the same 110-position, 2mm pitch, 5-row configuration and through-hole press-fit termination. Mechanical and electrical compatibility is maintained across manufacturers. Verify contact finish and current rating requirements for your specific application.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message